blob: 737de2cb8e28b212e75f1ed2d53b43fcfa65b85b [file] [log] [blame]
menu "MediaTek MIPS platforms"
depends on ARCH_MTMIPS
config SYS_MALLOC_F_LEN
default 0x1000
config SYS_SOC
default "mt7628" if SOC_MT7628
config SYS_DCACHE_SIZE
default 32768
config SYS_DCACHE_LINE_SIZE
default 32
config SYS_ICACHE_SIZE
default 65536
config SYS_ICACHE_LINE_SIZE
default 32
config SYS_TEXT_BASE
default 0x9c000000 if !SPL
default 0x80200000 if SPL
config SPL_TEXT_BASE
default 0x9c000000
config SPL_PAYLOAD
default "u-boot-lzma.img" if SPL_LZMA
config BUILD_TARGET
default "u-boot-with-spl.bin" if SPL
choice
prompt "MediaTek MIPS SoC select"
config SOC_MT7628
bool "MT7628"
select MIPS_L1_CACHE_SHIFT_5
select MIPS_INIT_STACK_IN_SRAM
select MIPS_SRAM_INIT
select SYS_MIPS_CACHE_INIT_RAM_LOAD
select PINCTRL_MT7628
select MTK_SERIAL
select SYSRESET_RESETCTL
select SPL_SEPARATE_BSS if SPL
select SPL_INIT_STACK_WITHOUT_MALLOC_F if SPL
select SPL_LOADER_SUPPORT if SPL
select SPL_OF_CONTROL if SPL_DM
select SPL_SIMPLE_BUS if SPL_DM
select SPL_DM_SERIAL if SPL_DM
select SPL_CLK if SPL_DM && SPL_SERIAL_SUPPORT
select SPL_SYSRESET if SPL_DM
select SPL_OF_LIBFDT if SPL_OF_CONTROL
help
This supports MediaTek MT7628/MT7688.
endchoice
choice
prompt "Board select"
config BOARD_GARDENA_SMART_GATEWAY_MT7688
bool "GARDENA smart Gateway"
depends on SOC_MT7628
select BOARD_LATE_INIT
help
GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
config BOARD_LINKIT_SMART_7688
bool "LinkIt Smart 7688"
depends on SOC_MT7628
help
Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
and 32 MiB of flash (SPI).
Between its different peripherals there's an integrated switch with 4
ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
a MT7688 (PCIe).
config BOARD_MT7628_RFB
bool "MediaTek MT7628 RFB"
depends on SOC_MT7628
help
The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
1 SDXC, 1 PCIe socket and JTAG pins.
config BOARD_VOCORE2
bool "VoCore2"
depends on SOC_MT7628
select SPL_SERIAL_SUPPORT
select SPL_UART2_SPIS_PINMUX
help
VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
and 16 MiB of flash (SPI).
endchoice
config SPL_UART2_SPIS_PINMUX
bool "Use alternative pinmux for UART2 in SPL stage"
depends on SPL_SERIAL_SUPPORT
default n
help
Select this if the UART2 of your board is connected to GPIO 16/17
(shared with SPIS) rather than the usual GPIO 20/21.
source "board/gardena/smart-gateway-mt7688/Kconfig"
source "board/mediatek/mt7628/Kconfig"
source "board/seeed/linkit-smart-7688/Kconfig"
source "board/vocore/vocore2/Kconfig"
endmenu