drivers/gpio/qcom_pmic_gpio.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Qualcomm generic pmic gpio driver
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
  */

 #include <common.h>
 #include <dm.h>
 #include <log.h>
 #include <power/pmic.h>
 #include <spmi/spmi.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <linux/bitops.h>

 /* Register offset for each gpio */
 #define REG_OFFSET(x)          ((x) * 0x100)

 /* Register maps */

 /* Type and subtype are shared for all PMIC peripherals */
 #define REG_TYPE               0x4
 #define REG_SUBTYPE            0x5

 /* GPIO peripheral type and subtype out_values */
 #define REG_TYPE_VAL		0x10
 #define REG_SUBTYPE_GPIO_4CH	0x1
 #define REG_SUBTYPE_GPIOC_4CH	0x5
 #define REG_SUBTYPE_GPIO_8CH	0x9
 #define REG_SUBTYPE_GPIOC_8CH	0xd
 #define REG_SUBTYPE_GPIO_LV	0x10
 #define REG_SUBTYPE_GPIO_MV	0x11

 #define REG_STATUS             0x08
 #define REG_STATUS_VAL_MASK    0x1

 /* MODE_CTL */
 #define REG_CTL		0x40
 #define REG_CTL_MODE_MASK       0x70
 #define REG_CTL_MODE_INPUT      0x00
 #define REG_CTL_MODE_INOUT      0x20
 #define REG_CTL_MODE_OUTPUT     0x10
 #define REG_CTL_OUTPUT_MASK     0x0F
 #define REG_CTL_LV_MV_MODE_MASK		0x3
 #define REG_CTL_LV_MV_MODE_INPUT	0x0
 #define REG_CTL_LV_MV_MODE_INOUT	0x2
 #define REG_CTL_LV_MV_MODE_OUTPUT	0x1

 #define REG_DIG_VIN_CTL        0x41
 #define REG_DIG_VIN_VIN0       0

 #define REG_DIG_PULL_CTL       0x42
 #define REG_DIG_PULL_NO_PU     0x5

 #define REG_LV_MV_OUTPUT_CTL	0x44
 #define REG_LV_MV_OUTPUT_CTL_MASK	0x80
 #define REG_LV_MV_OUTPUT_CTL_SHIFT	7

 #define REG_DIG_OUT_CTL        0x45
 #define REG_DIG_OUT_CTL_CMOS   (0x0 << 4)
 #define REG_DIG_OUT_CTL_DRIVE_L 0x1

 #define REG_EN_CTL             0x46
 #define REG_EN_CTL_ENABLE      (1 << 7)

 struct qcom_gpio_bank {
 	uint32_t pid; /* Peripheral ID on SPMI bus */
 	bool     lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
 };

 static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset,
 				   bool input, int value)
 {
 	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	uint32_t reg_ctl_val;
 	int ret;

 	/* Disable the GPIO */
 	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
 			      REG_EN_CTL_ENABLE, 0);
 	if (ret < 0)
 		return ret;

 	/* Select the mode and output */
 	if (priv->lv_mv_type) {
 		if (input)
 			reg_ctl_val = REG_CTL_LV_MV_MODE_INPUT;
 		else
 			reg_ctl_val = REG_CTL_LV_MV_MODE_INOUT;
 	} else {
 		if (input)
 			reg_ctl_val = REG_CTL_MODE_INPUT;
 		else
 			reg_ctl_val = REG_CTL_MODE_INOUT | !!value;
 	}

 	ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL, reg_ctl_val);
 	if (ret < 0)
 		return ret;

 	if (priv->lv_mv_type && !input) {
 		ret = pmic_reg_write(dev->parent,
 				     gpio_base + REG_LV_MV_OUTPUT_CTL,
 				     !!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
 		if (ret < 0)
 			return ret;
 	}

 	/* Set the right pull (no pull) */
 	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
 			     REG_DIG_PULL_NO_PU);
 	if (ret < 0)
 		return ret;

 	/* Configure output pin drivers if needed */
 	if (!input) {
 		/* Select the VIN - VIN0, pin is input so it doesn't matter */
 		ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
 				     REG_DIG_VIN_VIN0);
 		if (ret < 0)
 			return ret;

 		/* Set the right dig out control */
 		ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
 				     REG_DIG_OUT_CTL_CMOS |
 				     REG_DIG_OUT_CTL_DRIVE_L);
 		if (ret < 0)
 			return ret;
 	}

 	/* Enable the GPIO */
 	return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
 			       REG_EN_CTL_ENABLE);
 }

 static int qcom_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
 	return qcom_gpio_set_direction(dev, offset, true, 0);
 }

 static int qcom_gpio_direction_output(struct udevice *dev, unsigned offset,
 				      int value)
 {
 	return qcom_gpio_set_direction(dev, offset, false, value);
 }

 static int qcom_gpio_get_function(struct udevice *dev, unsigned offset)
 {
 	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int reg;

 	reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
 	if (reg < 0)
 		return reg;

 	if (priv->lv_mv_type) {
 		switch (reg & REG_CTL_LV_MV_MODE_MASK) {
 		case REG_CTL_LV_MV_MODE_INPUT:
 			return GPIOF_INPUT;
 		case REG_CTL_LV_MV_MODE_INOUT: /* Fallthrough */
 		case REG_CTL_LV_MV_MODE_OUTPUT:
 			return GPIOF_OUTPUT;
 		default:
 			return GPIOF_UNKNOWN;
 		}
 	} else {
 		switch (reg & REG_CTL_MODE_MASK) {
 		case REG_CTL_MODE_INPUT:
 			return GPIOF_INPUT;
 		case REG_CTL_MODE_INOUT: /* Fallthrough */
 		case REG_CTL_MODE_OUTPUT:
 			return GPIOF_OUTPUT;
 		default:
 			return GPIOF_UNKNOWN;
 		}
 	}
 }

 static int qcom_gpio_get_value(struct udevice *dev, unsigned offset)
 {
 	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int reg;

 	reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
 	if (reg < 0)
 		return reg;

 	return !!(reg & REG_STATUS_VAL_MASK);
 }

 static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
 			       int value)
 {
 	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);

 	/* Set the output value of the gpio */
 	if (priv->lv_mv_type)
 		return pmic_clrsetbits(dev->parent,
 				       gpio_base + REG_LV_MV_OUTPUT_CTL,
 				       REG_LV_MV_OUTPUT_CTL_MASK,
 				       !!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
 	else
 		return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
 				       REG_CTL_OUTPUT_MASK, !!value);
 }

 static const struct dm_gpio_ops qcom_gpio_ops = {
 	.direction_input	= qcom_gpio_direction_input,
 	.direction_output	= qcom_gpio_direction_output,
 	.get_value		= qcom_gpio_get_value,
 	.set_value		= qcom_gpio_set_value,
 	.get_function		= qcom_gpio_get_function,
 };

 static int qcom_gpio_probe(struct udevice *dev)
 {
 	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	int reg;

 	priv->pid = dev_read_addr(dev);
 	if (priv->pid == FDT_ADDR_T_NONE)
 		return log_msg_ret("bad address", -EINVAL);

 	/* Do a sanity check */
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
 	if (reg != REG_TYPE_VAL)
 		return log_msg_ret("bad type", -ENXIO);

 	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
 	if (reg != REG_SUBTYPE_GPIO_4CH && reg != REG_SUBTYPE_GPIOC_4CH &&
 	    reg != REG_SUBTYPE_GPIO_LV && reg != REG_SUBTYPE_GPIO_MV)
 		return log_msg_ret("bad subtype", -ENXIO);

 	priv->lv_mv_type = reg == REG_SUBTYPE_GPIO_LV ||
 			   reg == REG_SUBTYPE_GPIO_MV;

 	return 0;
 }

 static int qcom_gpio_of_to_plat(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

 	uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
 	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
 	if (uc_priv->bank_name == NULL)
 		uc_priv->bank_name = "qcom_pmic";

 	return 0;
 }

 static const struct udevice_id qcom_gpio_ids[] = {
 	{ .compatible = "qcom,pm8916-gpio" },
 	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
 	{ .compatible = "qcom,pm8998-gpio" },
 	{ .compatible = "qcom,pms405-gpio" },
 	{ }
 };

 U_BOOT_DRIVER(qcom_pmic_gpio) = {
 	.name	= "qcom_pmic_gpio",
 	.id	= UCLASS_GPIO,
 	.of_match = qcom_gpio_ids,
 	.of_to_plat = qcom_gpio_of_to_plat,
 	.probe	= qcom_gpio_probe,
 	.ops	= &qcom_gpio_ops,
 	.priv_auto	= sizeof(struct qcom_gpio_bank),
 };


 /* Add pmic buttons as GPIO as well - there is no generic way for now */
 #define PON_INT_RT_STS                        0x10
 #define KPDPWR_ON_INT_BIT                     0
 #define RESIN_ON_INT_BIT                      1

 static int qcom_pwrkey_get_function(struct udevice *dev, unsigned offset)
 {
 	return GPIOF_INPUT;
 }

 static int qcom_pwrkey_get_value(struct udevice *dev, unsigned offset)
 {
 	struct qcom_gpio_bank *priv = dev_get_priv(dev);

 	int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);

 	if (reg < 0)
 		return 0;

 	switch (offset) {
 	case 0: /* Power button */
 		return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
 		break;
 	case 1: /* Reset button */
 	default:
 		return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
 		break;
 	}
 }

 /*
  * Since pmic buttons modelled as GPIO, we need empty direction functions
  * to trick u-boot button driver
  */
 static int qcom_pwrkey_direction_input(struct udevice *dev, unsigned int offset)
 {
 	return 0;
 }

 static int qcom_pwrkey_direction_output(struct udevice *dev, unsigned int offset, int value)
 {
 	return -EOPNOTSUPP;
 }

 static const struct dm_gpio_ops qcom_pwrkey_ops = {
 	.get_value		= qcom_pwrkey_get_value,
 	.get_function		= qcom_pwrkey_get_function,
 	.direction_input	= qcom_pwrkey_direction_input,
 	.direction_output	= qcom_pwrkey_direction_output,
 };

 static int qcom_pwrkey_probe(struct udevice *dev)
 {
 	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	int reg;

 	priv->pid = dev_read_addr(dev);
 	if (priv->pid == FDT_ADDR_T_NONE)
 		return log_msg_ret("bad address", -EINVAL);

 	/* Do a sanity check */
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
 	if (reg != 0x1)
 		return log_msg_ret("bad type", -ENXIO);

 	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
 	if ((reg & 0x5) == 0)
 		return log_msg_ret("bad subtype", -ENXIO);

 	return 0;
 }

 static int qcom_pwrkey_of_to_plat(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

 	uc_priv->gpio_count = 2;
 	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
 	if (uc_priv->bank_name == NULL)
 		uc_priv->bank_name = "pwkey_qcom";

 	return 0;
 }

 static const struct udevice_id qcom_pwrkey_ids[] = {
 	{ .compatible = "qcom,pm8916-pwrkey" },
 	{ .compatible = "qcom,pm8994-pwrkey" },
 	{ .compatible = "qcom,pm8998-pwrkey" },
 	{ }
 };

 U_BOOT_DRIVER(pwrkey_qcom) = {
 	.name	= "pwrkey_qcom",
 	.id	= UCLASS_GPIO,
 	.of_match = qcom_pwrkey_ids,
 	.of_to_plat = qcom_pwrkey_of_to_plat,
 	.probe	= qcom_pwrkey_probe,
 	.ops	= &qcom_pwrkey_ops,
 	.priv_auto	= sizeof(struct qcom_gpio_bank),
 };
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Qualcomm generic pmic gpio driver
	*
	* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
	*/

	#include <common.h>
	#include <dm.h>
	#include <log.h>
	#include <power/pmic.h>
	#include <spmi/spmi.h>
	#include <asm/io.h>
	#include <asm/gpio.h>
	#include <linux/bitops.h>

	/* Register offset for each gpio */
	#define REG_OFFSET(x) ((x) * 0x100)

	/* Register maps */

	/* Type and subtype are shared for all PMIC peripherals */
	#define REG_TYPE 0x4
	#define REG_SUBTYPE 0x5

	/* GPIO peripheral type and subtype out_values */
	#define REG_TYPE_VAL 0x10
	#define REG_SUBTYPE_GPIO_4CH 0x1
	#define REG_SUBTYPE_GPIOC_4CH 0x5
	#define REG_SUBTYPE_GPIO_8CH 0x9
	#define REG_SUBTYPE_GPIOC_8CH 0xd
	#define REG_SUBTYPE_GPIO_LV 0x10
	#define REG_SUBTYPE_GPIO_MV 0x11

	#define REG_STATUS 0x08
	#define REG_STATUS_VAL_MASK 0x1

	/* MODE_CTL */
	#define REG_CTL 0x40
	#define REG_CTL_MODE_MASK 0x70
	#define REG_CTL_MODE_INPUT 0x00
	#define REG_CTL_MODE_INOUT 0x20
	#define REG_CTL_MODE_OUTPUT 0x10
	#define REG_CTL_OUTPUT_MASK 0x0F
	#define REG_CTL_LV_MV_MODE_MASK 0x3
	#define REG_CTL_LV_MV_MODE_INPUT 0x0
	#define REG_CTL_LV_MV_MODE_INOUT 0x2
	#define REG_CTL_LV_MV_MODE_OUTPUT 0x1

	#define REG_DIG_VIN_CTL 0x41
	#define REG_DIG_VIN_VIN0 0

	#define REG_DIG_PULL_CTL 0x42
	#define REG_DIG_PULL_NO_PU 0x5

	#define REG_LV_MV_OUTPUT_CTL 0x44
	#define REG_LV_MV_OUTPUT_CTL_MASK 0x80
	#define REG_LV_MV_OUTPUT_CTL_SHIFT 7

	#define REG_DIG_OUT_CTL 0x45
	#define REG_DIG_OUT_CTL_CMOS (0x0 << 4)
	#define REG_DIG_OUT_CTL_DRIVE_L 0x1

	#define REG_EN_CTL 0x46
	#define REG_EN_CTL_ENABLE (1 << 7)

	struct qcom_gpio_bank {
	uint32_t pid; /* Peripheral ID on SPMI bus */
	bool lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
	};

	static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset,
	bool input, int value)
	{
	struct qcom_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
	uint32_t reg_ctl_val;
	int ret;

	/* Disable the GPIO */
	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
	REG_EN_CTL_ENABLE, 0);
	if (ret < 0)
	return ret;

	/* Select the mode and output */
	if (priv->lv_mv_type) {
	if (input)
	reg_ctl_val = REG_CTL_LV_MV_MODE_INPUT;
	else
	reg_ctl_val = REG_CTL_LV_MV_MODE_INOUT;
	} else {
	if (input)
	reg_ctl_val = REG_CTL_MODE_INPUT;
	else
	reg_ctl_val = REG_CTL_MODE_INOUT \| !!value;
	}

	ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL, reg_ctl_val);
	if (ret < 0)
	return ret;

	if (priv->lv_mv_type && !input) {
	ret = pmic_reg_write(dev->parent,
	gpio_base + REG_LV_MV_OUTPUT_CTL,
	!!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
	if (ret < 0)
	return ret;
	}

	/* Set the right pull (no pull) */
	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
	REG_DIG_PULL_NO_PU);
	if (ret < 0)
	return ret;

	/* Configure output pin drivers if needed */
	if (!input) {
	/* Select the VIN - VIN0, pin is input so it doesn't matter */
	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
	REG_DIG_VIN_VIN0);
	if (ret < 0)
	return ret;

	/* Set the right dig out control */
	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
	REG_DIG_OUT_CTL_CMOS \|
	REG_DIG_OUT_CTL_DRIVE_L);
	if (ret < 0)
	return ret;
	}

	/* Enable the GPIO */
	return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
	REG_EN_CTL_ENABLE);
	}

	static int qcom_gpio_direction_input(struct udevice *dev, unsigned offset)
	{
	return qcom_gpio_set_direction(dev, offset, true, 0);
	}

	static int qcom_gpio_direction_output(struct udevice *dev, unsigned offset,
	int value)
	{
	return qcom_gpio_set_direction(dev, offset, false, value);
	}

	static int qcom_gpio_get_function(struct udevice *dev, unsigned offset)
	{
	struct qcom_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
	int reg;

	reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
	if (reg < 0)
	return reg;

	if (priv->lv_mv_type) {
	switch (reg & REG_CTL_LV_MV_MODE_MASK) {
	case REG_CTL_LV_MV_MODE_INPUT:
	return GPIOF_INPUT;
	case REG_CTL_LV_MV_MODE_INOUT: /* Fallthrough */
	case REG_CTL_LV_MV_MODE_OUTPUT:
	return GPIOF_OUTPUT;
	default:
	return GPIOF_UNKNOWN;
	}
	} else {
	switch (reg & REG_CTL_MODE_MASK) {
	case REG_CTL_MODE_INPUT:
	return GPIOF_INPUT;
	case REG_CTL_MODE_INOUT: /* Fallthrough */
	case REG_CTL_MODE_OUTPUT:
	return GPIOF_OUTPUT;
	default:
	return GPIOF_UNKNOWN;
	}
	}
	}

	static int qcom_gpio_get_value(struct udevice *dev, unsigned offset)
	{
	struct qcom_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
	int reg;

	reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
	if (reg < 0)
	return reg;

	return !!(reg & REG_STATUS_VAL_MASK);
	}

	static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
	int value)
	{
	struct qcom_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);

	/* Set the output value of the gpio */
	if (priv->lv_mv_type)
	return pmic_clrsetbits(dev->parent,
	gpio_base + REG_LV_MV_OUTPUT_CTL,
	REG_LV_MV_OUTPUT_CTL_MASK,
	!!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
	else
	return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
	REG_CTL_OUTPUT_MASK, !!value);
	}

	static const struct dm_gpio_ops qcom_gpio_ops = {
	.direction_input = qcom_gpio_direction_input,
	.direction_output = qcom_gpio_direction_output,
	.get_value = qcom_gpio_get_value,
	.set_value = qcom_gpio_set_value,
	.get_function = qcom_gpio_get_function,
	};

	static int qcom_gpio_probe(struct udevice *dev)
	{
	struct qcom_gpio_bank *priv = dev_get_priv(dev);
	int reg;

	priv->pid = dev_read_addr(dev);
	if (priv->pid == FDT_ADDR_T_NONE)
	return log_msg_ret("bad address", -EINVAL);

	/* Do a sanity check */
	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
	if (reg != REG_TYPE_VAL)
	return log_msg_ret("bad type", -ENXIO);

	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
	if (reg != REG_SUBTYPE_GPIO_4CH && reg != REG_SUBTYPE_GPIOC_4CH &&
	reg != REG_SUBTYPE_GPIO_LV && reg != REG_SUBTYPE_GPIO_MV)
	return log_msg_ret("bad subtype", -ENXIO);

	priv->lv_mv_type = reg == REG_SUBTYPE_GPIO_LV \|\|
	reg == REG_SUBTYPE_GPIO_MV;

	return 0;
	}

	static int qcom_gpio_of_to_plat(struct udevice *dev)
	{
	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

	uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
	if (uc_priv->bank_name == NULL)
	uc_priv->bank_name = "qcom_pmic";

	return 0;
	}

	static const struct udevice_id qcom_gpio_ids[] = {
	{ .compatible = "qcom,pm8916-gpio" },
	{ .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */
	{ .compatible = "qcom,pm8998-gpio" },
	{ .compatible = "qcom,pms405-gpio" },
	{ }
	};

	U_BOOT_DRIVER(qcom_pmic_gpio) = {
	.name = "qcom_pmic_gpio",
	.id = UCLASS_GPIO,
	.of_match = qcom_gpio_ids,
	.of_to_plat = qcom_gpio_of_to_plat,
	.probe = qcom_gpio_probe,
	.ops = &qcom_gpio_ops,
	.priv_auto = sizeof(struct qcom_gpio_bank),
	};


	/* Add pmic buttons as GPIO as well - there is no generic way for now */
	#define PON_INT_RT_STS 0x10
	#define KPDPWR_ON_INT_BIT 0
	#define RESIN_ON_INT_BIT 1

	static int qcom_pwrkey_get_function(struct udevice *dev, unsigned offset)
	{
	return GPIOF_INPUT;
	}

	static int qcom_pwrkey_get_value(struct udevice *dev, unsigned offset)
	{
	struct qcom_gpio_bank *priv = dev_get_priv(dev);

	int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);

	if (reg < 0)
	return 0;

	switch (offset) {
	case 0: /* Power button */
	return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
	break;
	case 1: /* Reset button */
	default:
	return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
	break;
	}
	}

	/*
	* Since pmic buttons modelled as GPIO, we need empty direction functions
	* to trick u-boot button driver
	*/
	static int qcom_pwrkey_direction_input(struct udevice *dev, unsigned int offset)
	{
	return 0;
	}

	static int qcom_pwrkey_direction_output(struct udevice *dev, unsigned int offset, int value)
	{
	return -EOPNOTSUPP;
	}

	static const struct dm_gpio_ops qcom_pwrkey_ops = {
	.get_value = qcom_pwrkey_get_value,
	.get_function = qcom_pwrkey_get_function,
	.direction_input = qcom_pwrkey_direction_input,
	.direction_output = qcom_pwrkey_direction_output,
	};

	static int qcom_pwrkey_probe(struct udevice *dev)
	{
	struct qcom_gpio_bank *priv = dev_get_priv(dev);
	int reg;

	priv->pid = dev_read_addr(dev);
	if (priv->pid == FDT_ADDR_T_NONE)
	return log_msg_ret("bad address", -EINVAL);

	/* Do a sanity check */
	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
	if (reg != 0x1)
	return log_msg_ret("bad type", -ENXIO);

	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
	if ((reg & 0x5) == 0)
	return log_msg_ret("bad subtype", -ENXIO);

	return 0;
	}

	static int qcom_pwrkey_of_to_plat(struct udevice *dev)
	{
	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

	uc_priv->gpio_count = 2;
	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
	if (uc_priv->bank_name == NULL)
	uc_priv->bank_name = "pwkey_qcom";

	return 0;
	}

	static const struct udevice_id qcom_pwrkey_ids[] = {
	{ .compatible = "qcom,pm8916-pwrkey" },
	{ .compatible = "qcom,pm8994-pwrkey" },
	{ .compatible = "qcom,pm8998-pwrkey" },
	{ }
	};

	U_BOOT_DRIVER(pwrkey_qcom) = {
	.name = "pwrkey_qcom",
	.id = UCLASS_GPIO,
	.of_match = qcom_pwrkey_ids,
	.of_to_plat = qcom_pwrkey_of_to_plat,
	.probe = qcom_pwrkey_probe,
	.ops = &qcom_pwrkey_ops,
	.priv_auto = sizeof(struct qcom_gpio_bank),
	};