| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * ARM PrimeCell Dual-Timer Module (SP804) driver |
| * Copyright (C) 2022 Arm Ltd. |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <init.h> |
| #include <log.h> |
| #include <asm/global_data.h> |
| #include <dm/ofnode.h> |
| #include <mapmem.h> |
| #include <dt-structs.h> |
| #include <timer.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define SP804_TIMERX_LOAD 0x00 |
| #define SP804_TIMERX_VALUE 0x04 |
| #define SP804_TIMERX_CONTROL 0x08 |
| |
| #define SP804_CTRL_TIMER_ENABLE (1U << 7) |
| #define SP804_CTRL_TIMER_PERIODIC (1U << 6) |
| #define SP804_CTRL_INT_ENABLE (1U << 5) |
| #define SP804_CTRL_TIMER_PRESCALE_SHIFT 2 |
| #define SP804_CTRL_TIMER_PRESCALE_MASK (3U << SP804_CTRL_TIMER_PRESCALE_SHIFT) |
| #define SP804_CTRL_TIMER_32BIT (1U << 1) |
| #define SP804_CTRL_ONESHOT (1U << 0) |
| |
| |
| struct sp804_timer_plat { |
| uintptr_t base; |
| }; |
| |
| static u64 sp804_timer_get_count(struct udevice *dev) |
| { |
| struct sp804_timer_plat *plat = dev_get_plat(dev); |
| uint32_t cntr = readl(plat->base + SP804_TIMERX_VALUE); |
| |
| /* timers are down-counting */ |
| return ~0u - cntr; |
| } |
| |
| static int sp804_clk_of_to_plat(struct udevice *dev) |
| { |
| struct sp804_timer_plat *plat = dev_get_plat(dev); |
| |
| plat->base = dev_read_addr(dev); |
| if (!plat->base) |
| return -ENOENT; |
| |
| return 0; |
| } |
| |
| static int sp804_timer_probe(struct udevice *dev) |
| { |
| struct sp804_timer_plat *plat = dev_get_plat(dev); |
| struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct clk base_clk; |
| unsigned int divider = 1; |
| uint32_t ctlr; |
| int ret; |
| |
| ctlr = readl(plat->base + SP804_TIMERX_CONTROL); |
| ctlr &= SP804_CTRL_TIMER_PRESCALE_MASK; |
| switch (ctlr >> SP804_CTRL_TIMER_PRESCALE_SHIFT) { |
| case 0x0: divider = 1; break; |
| case 0x1: divider = 16; break; |
| case 0x2: divider = 256; break; |
| case 0x3: printf("illegal!\n"); break; |
| } |
| |
| ret = clk_get_by_index(dev, 0, &base_clk); |
| if (ret) { |
| printf("could not find SP804 timer base clock in DT\n"); |
| return ret; |
| } |
| |
| uc_priv->clock_rate = clk_get_rate(&base_clk) / divider; |
| |
| /* keep divider, free-running, wrapping, no IRQs, 32-bit mode */ |
| ctlr |= SP804_CTRL_TIMER_32BIT | SP804_CTRL_TIMER_ENABLE; |
| writel(ctlr, plat->base + SP804_TIMERX_CONTROL); |
| |
| return 0; |
| } |
| |
| static const struct timer_ops sp804_timer_ops = { |
| .get_count = sp804_timer_get_count, |
| }; |
| |
| static const struct udevice_id sp804_timer_ids[] = { |
| { .compatible = "arm,sp804" }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(arm_sp804_timer) = { |
| .name = "arm_sp804_timer", |
| .id = UCLASS_TIMER, |
| .of_match = sp804_timer_ids, |
| .probe = sp804_timer_probe, |
| .ops = &sp804_timer_ops, |
| .plat_auto = sizeof(struct sp804_timer_plat), |
| .of_to_plat = sp804_clk_of_to_plat, |
| }; |