| /* |
| * Copyright (C) 2005-2006 Atmel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <common.h> |
| |
| #if defined(CONFIG_MACB) \ |
| && (defined(CONFIG_CMD_NET) || defined(CONFIG_CMD_MII)) |
| |
| /* |
| * The u-boot networking stack is a little weird. It seems like the |
| * networking core allocates receive buffers up front without any |
| * regard to the hardware that's supposed to actually receive those |
| * packets. |
| * |
| * The MACB receives packets into 128-byte receive buffers, so the |
| * buffers allocated by the core isn't very practical to use. We'll |
| * allocate our own, but we need one such buffer in case a packet |
| * wraps around the DMA ring so that we have to copy it. |
| * |
| * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific |
| * configuration header. This way, the core allocates one RX buffer |
| * and one TX buffer, each of which can hold a ethernet packet of |
| * maximum size. |
| * |
| * For some reason, the networking core unconditionally specifies a |
| * 32-byte packet "alignment" (which really should be called |
| * "padding"). MACB shouldn't need that, but we'll refrain from any |
| * core modifications here... |
| */ |
| |
| #include <net.h> |
| #include <malloc.h> |
| |
| #include <linux/mii.h> |
| #include <asm/io.h> |
| #include <asm/dma-mapping.h> |
| #include <asm/arch/clk.h> |
| |
| #include "macb.h" |
| |
| #define barrier() asm volatile("" ::: "memory") |
| |
| #define CFG_MACB_RX_BUFFER_SIZE 4096 |
| #define CFG_MACB_RX_RING_SIZE (CFG_MACB_RX_BUFFER_SIZE / 128) |
| #define CFG_MACB_TX_RING_SIZE 16 |
| #define CFG_MACB_TX_TIMEOUT 1000 |
| #define CFG_MACB_AUTONEG_TIMEOUT 5000000 |
| |
| struct macb_dma_desc { |
| u32 addr; |
| u32 ctrl; |
| }; |
| |
| #define RXADDR_USED 0x00000001 |
| #define RXADDR_WRAP 0x00000002 |
| |
| #define RXBUF_FRMLEN_MASK 0x00000fff |
| #define RXBUF_FRAME_START 0x00004000 |
| #define RXBUF_FRAME_END 0x00008000 |
| #define RXBUF_TYPEID_MATCH 0x00400000 |
| #define RXBUF_ADDR4_MATCH 0x00800000 |
| #define RXBUF_ADDR3_MATCH 0x01000000 |
| #define RXBUF_ADDR2_MATCH 0x02000000 |
| #define RXBUF_ADDR1_MATCH 0x04000000 |
| #define RXBUF_BROADCAST 0x80000000 |
| |
| #define TXBUF_FRMLEN_MASK 0x000007ff |
| #define TXBUF_FRAME_END 0x00008000 |
| #define TXBUF_NOCRC 0x00010000 |
| #define TXBUF_EXHAUSTED 0x08000000 |
| #define TXBUF_UNDERRUN 0x10000000 |
| #define TXBUF_MAXRETRY 0x20000000 |
| #define TXBUF_WRAP 0x40000000 |
| #define TXBUF_USED 0x80000000 |
| |
| struct macb_device { |
| void *regs; |
| |
| unsigned int rx_tail; |
| unsigned int tx_head; |
| unsigned int tx_tail; |
| |
| void *rx_buffer; |
| void *tx_buffer; |
| struct macb_dma_desc *rx_ring; |
| struct macb_dma_desc *tx_ring; |
| |
| unsigned long rx_buffer_dma; |
| unsigned long rx_ring_dma; |
| unsigned long tx_ring_dma; |
| |
| const struct device *dev; |
| struct eth_device netdev; |
| unsigned short phy_addr; |
| }; |
| #define to_macb(_nd) container_of(_nd, struct macb_device, netdev) |
| |
| static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value) |
| { |
| unsigned long netctl; |
| unsigned long netstat; |
| unsigned long frame; |
| |
| netctl = macb_readl(macb, NCR); |
| netctl |= MACB_BIT(MPE); |
| macb_writel(macb, NCR, netctl); |
| |
| frame = (MACB_BF(SOF, 1) |
| | MACB_BF(RW, 1) |
| | MACB_BF(PHYA, macb->phy_addr) |
| | MACB_BF(REGA, reg) |
| | MACB_BF(CODE, 2) |
| | MACB_BF(DATA, value)); |
| macb_writel(macb, MAN, frame); |
| |
| do { |
| netstat = macb_readl(macb, NSR); |
| } while (!(netstat & MACB_BIT(IDLE))); |
| |
| netctl = macb_readl(macb, NCR); |
| netctl &= ~MACB_BIT(MPE); |
| macb_writel(macb, NCR, netctl); |
| } |
| |
| static u16 macb_mdio_read(struct macb_device *macb, u8 reg) |
| { |
| unsigned long netctl; |
| unsigned long netstat; |
| unsigned long frame; |
| |
| netctl = macb_readl(macb, NCR); |
| netctl |= MACB_BIT(MPE); |
| macb_writel(macb, NCR, netctl); |
| |
| frame = (MACB_BF(SOF, 1) |
| | MACB_BF(RW, 2) |
| | MACB_BF(PHYA, macb->phy_addr) |
| | MACB_BF(REGA, reg) |
| | MACB_BF(CODE, 2)); |
| macb_writel(macb, MAN, frame); |
| |
| do { |
| netstat = macb_readl(macb, NSR); |
| } while (!(netstat & MACB_BIT(IDLE))); |
| |
| frame = macb_readl(macb, MAN); |
| |
| netctl = macb_readl(macb, NCR); |
| netctl &= ~MACB_BIT(MPE); |
| macb_writel(macb, NCR, netctl); |
| |
| return MACB_BFEXT(DATA, frame); |
| } |
| |
| #if defined(CONFIG_CMD_NET) |
| |
| static int macb_send(struct eth_device *netdev, volatile void *packet, |
| int length) |
| { |
| struct macb_device *macb = to_macb(netdev); |
| unsigned long paddr, ctrl; |
| unsigned int tx_head = macb->tx_head; |
| int i; |
| |
| paddr = dma_map_single(packet, length, DMA_TO_DEVICE); |
| |
| ctrl = length & TXBUF_FRMLEN_MASK; |
| ctrl |= TXBUF_FRAME_END; |
| if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) { |
| ctrl |= TXBUF_WRAP; |
| macb->tx_head = 0; |
| } else |
| macb->tx_head++; |
| |
| macb->tx_ring[tx_head].ctrl = ctrl; |
| macb->tx_ring[tx_head].addr = paddr; |
| barrier(); |
| macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART)); |
| |
| /* |
| * I guess this is necessary because the networking core may |
| * re-use the transmit buffer as soon as we return... |
| */ |
| for (i = 0; i <= CFG_MACB_TX_TIMEOUT; i++) { |
| barrier(); |
| ctrl = macb->tx_ring[tx_head].ctrl; |
| if (ctrl & TXBUF_USED) |
| break; |
| udelay(1); |
| } |
| |
| dma_unmap_single(packet, length, paddr); |
| |
| if (i <= CFG_MACB_TX_TIMEOUT) { |
| if (ctrl & TXBUF_UNDERRUN) |
| printf("%s: TX underrun\n", netdev->name); |
| if (ctrl & TXBUF_EXHAUSTED) |
| printf("%s: TX buffers exhausted in mid frame\n", |
| netdev->name); |
| } else { |
| printf("%s: TX timeout\n", netdev->name); |
| } |
| |
| /* No one cares anyway */ |
| return 0; |
| } |
| |
| static void reclaim_rx_buffers(struct macb_device *macb, |
| unsigned int new_tail) |
| { |
| unsigned int i; |
| |
| i = macb->rx_tail; |
| while (i > new_tail) { |
| macb->rx_ring[i].addr &= ~RXADDR_USED; |
| i++; |
| if (i > CFG_MACB_RX_RING_SIZE) |
| i = 0; |
| } |
| |
| while (i < new_tail) { |
| macb->rx_ring[i].addr &= ~RXADDR_USED; |
| i++; |
| } |
| |
| barrier(); |
| macb->rx_tail = new_tail; |
| } |
| |
| static int macb_recv(struct eth_device *netdev) |
| { |
| struct macb_device *macb = to_macb(netdev); |
| unsigned int rx_tail = macb->rx_tail; |
| void *buffer; |
| int length; |
| int wrapped = 0; |
| u32 status; |
| |
| for (;;) { |
| if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED)) |
| return -1; |
| |
| status = macb->rx_ring[rx_tail].ctrl; |
| if (status & RXBUF_FRAME_START) { |
| if (rx_tail != macb->rx_tail) |
| reclaim_rx_buffers(macb, rx_tail); |
| wrapped = 0; |
| } |
| |
| if (status & RXBUF_FRAME_END) { |
| buffer = macb->rx_buffer + 128 * macb->rx_tail; |
| length = status & RXBUF_FRMLEN_MASK; |
| if (wrapped) { |
| unsigned int headlen, taillen; |
| |
| headlen = 128 * (CFG_MACB_RX_RING_SIZE |
| - macb->rx_tail); |
| taillen = length - headlen; |
| memcpy((void *)NetRxPackets[0], |
| buffer, headlen); |
| memcpy((void *)NetRxPackets[0] + headlen, |
| macb->rx_buffer, taillen); |
| buffer = (void *)NetRxPackets[0]; |
| } |
| |
| NetReceive(buffer, length); |
| if (++rx_tail >= CFG_MACB_RX_RING_SIZE) |
| rx_tail = 0; |
| reclaim_rx_buffers(macb, rx_tail); |
| } else { |
| if (++rx_tail >= CFG_MACB_RX_RING_SIZE) { |
| wrapped = 1; |
| rx_tail = 0; |
| } |
| } |
| barrier(); |
| } |
| |
| return 0; |
| } |
| |
| static void macb_phy_reset(struct macb_device *macb) |
| { |
| struct eth_device *netdev = &macb->netdev; |
| int i; |
| u16 status, adv; |
| |
| adv = ADVERTISE_CSMA | ADVERTISE_ALL; |
| macb_mdio_write(macb, MII_ADVERTISE, adv); |
| printf("%s: Starting autonegotiation...\n", netdev->name); |
| macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE |
| | BMCR_ANRESTART)); |
| |
| for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) { |
| status = macb_mdio_read(macb, MII_BMSR); |
| if (status & BMSR_ANEGCOMPLETE) |
| break; |
| udelay(100); |
| } |
| |
| if (status & BMSR_ANEGCOMPLETE) |
| printf("%s: Autonegotiation complete\n", netdev->name); |
| else |
| printf("%s: Autonegotiation timed out (status=0x%04x)\n", |
| netdev->name, status); |
| } |
| |
| static int macb_phy_init(struct macb_device *macb) |
| { |
| struct eth_device *netdev = &macb->netdev; |
| u32 ncfgr; |
| u16 phy_id, status, adv, lpa; |
| int media, speed, duplex; |
| int i; |
| |
| /* Check if the PHY is up to snuff... */ |
| phy_id = macb_mdio_read(macb, MII_PHYSID1); |
| if (phy_id == 0xffff) { |
| printf("%s: No PHY present\n", netdev->name); |
| return 0; |
| } |
| |
| status = macb_mdio_read(macb, MII_BMSR); |
| if (!(status & BMSR_LSTATUS)) { |
| /* Try to re-negotiate if we don't have link already. */ |
| macb_phy_reset(macb); |
| |
| for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) { |
| status = macb_mdio_read(macb, MII_BMSR); |
| if (status & BMSR_LSTATUS) |
| break; |
| udelay(100); |
| } |
| } |
| |
| if (!(status & BMSR_LSTATUS)) { |
| printf("%s: link down (status: 0x%04x)\n", |
| netdev->name, status); |
| return 0; |
| } else { |
| adv = macb_mdio_read(macb, MII_ADVERTISE); |
| lpa = macb_mdio_read(macb, MII_LPA); |
| media = mii_nway_result(lpa & adv); |
| speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) |
| ? 1 : 0); |
| duplex = (media & ADVERTISE_FULL) ? 1 : 0; |
| printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n", |
| netdev->name, |
| speed ? "100" : "10", |
| duplex ? "full" : "half", |
| lpa); |
| |
| ncfgr = macb_readl(macb, NCFGR); |
| ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD)); |
| if (speed) |
| ncfgr |= MACB_BIT(SPD); |
| if (duplex) |
| ncfgr |= MACB_BIT(FD); |
| macb_writel(macb, NCFGR, ncfgr); |
| return 1; |
| } |
| } |
| |
| static int macb_init(struct eth_device *netdev, bd_t *bd) |
| { |
| struct macb_device *macb = to_macb(netdev); |
| unsigned long paddr; |
| u32 hwaddr_bottom; |
| u16 hwaddr_top; |
| int i; |
| |
| /* |
| * macb_halt should have been called at some point before now, |
| * so we'll assume the controller is idle. |
| */ |
| |
| /* initialize DMA descriptors */ |
| paddr = macb->rx_buffer_dma; |
| for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) { |
| if (i == (CFG_MACB_RX_RING_SIZE - 1)) |
| paddr |= RXADDR_WRAP; |
| macb->rx_ring[i].addr = paddr; |
| macb->rx_ring[i].ctrl = 0; |
| paddr += 128; |
| } |
| for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) { |
| macb->tx_ring[i].addr = 0; |
| if (i == (CFG_MACB_TX_RING_SIZE - 1)) |
| macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP; |
| else |
| macb->tx_ring[i].ctrl = TXBUF_USED; |
| } |
| macb->rx_tail = macb->tx_head = macb->tx_tail = 0; |
| |
| macb_writel(macb, RBQP, macb->rx_ring_dma); |
| macb_writel(macb, TBQP, macb->tx_ring_dma); |
| |
| /* set hardware address */ |
| hwaddr_bottom = cpu_to_le32(*((u32 *)netdev->enetaddr)); |
| macb_writel(macb, SA1B, hwaddr_bottom); |
| hwaddr_top = cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))); |
| macb_writel(macb, SA1T, hwaddr_top); |
| |
| /* choose RMII or MII mode. This depends on the board */ |
| #ifdef CONFIG_RMII |
| #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) |
| macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); |
| #else |
| macb_writel(macb, USRIO, 0); |
| #endif |
| #else |
| #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) |
| macb_writel(macb, USRIO, MACB_BIT(CLKEN)); |
| #else |
| macb_writel(macb, USRIO, MACB_BIT(MII)); |
| #endif |
| #endif /* CONFIG_RMII */ |
| |
| if (!macb_phy_init(macb)) |
| return -1; |
| |
| /* Enable TX and RX */ |
| macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE)); |
| |
| return 0; |
| } |
| |
| static void macb_halt(struct eth_device *netdev) |
| { |
| struct macb_device *macb = to_macb(netdev); |
| u32 ncr, tsr; |
| |
| /* Halt the controller and wait for any ongoing transmission to end. */ |
| ncr = macb_readl(macb, NCR); |
| ncr |= MACB_BIT(THALT); |
| macb_writel(macb, NCR, ncr); |
| |
| do { |
| tsr = macb_readl(macb, TSR); |
| } while (tsr & MACB_BIT(TGO)); |
| |
| /* Disable TX and RX, and clear statistics */ |
| macb_writel(macb, NCR, MACB_BIT(CLRSTAT)); |
| } |
| |
| int macb_eth_initialize(int id, void *regs, unsigned int phy_addr) |
| { |
| struct macb_device *macb; |
| struct eth_device *netdev; |
| unsigned long macb_hz; |
| u32 ncfgr; |
| |
| macb = malloc(sizeof(struct macb_device)); |
| if (!macb) { |
| printf("Error: Failed to allocate memory for MACB%d\n", id); |
| return -1; |
| } |
| memset(macb, 0, sizeof(struct macb_device)); |
| |
| netdev = &macb->netdev; |
| |
| macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE, |
| &macb->rx_buffer_dma); |
| macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE |
| * sizeof(struct macb_dma_desc), |
| &macb->rx_ring_dma); |
| macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE |
| * sizeof(struct macb_dma_desc), |
| &macb->tx_ring_dma); |
| |
| macb->regs = regs; |
| macb->phy_addr = phy_addr; |
| |
| sprintf(netdev->name, "macb%d", id); |
| netdev->init = macb_init; |
| netdev->halt = macb_halt; |
| netdev->send = macb_send; |
| netdev->recv = macb_recv; |
| |
| /* |
| * Do some basic initialization so that we at least can talk |
| * to the PHY |
| */ |
| macb_hz = get_macb_pclk_rate(id); |
| if (macb_hz < 20000000) |
| ncfgr = MACB_BF(CLK, MACB_CLK_DIV8); |
| else if (macb_hz < 40000000) |
| ncfgr = MACB_BF(CLK, MACB_CLK_DIV16); |
| else if (macb_hz < 80000000) |
| ncfgr = MACB_BF(CLK, MACB_CLK_DIV32); |
| else |
| ncfgr = MACB_BF(CLK, MACB_CLK_DIV64); |
| |
| macb_writel(macb, NCFGR, ncfgr); |
| |
| eth_register(netdev); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| #if defined(CONFIG_CMD_MII) |
| |
| int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value) |
| { |
| unsigned long netctl; |
| unsigned long netstat; |
| unsigned long frame; |
| int iflag; |
| |
| iflag = disable_interrupts(); |
| netctl = macb_readl(&macb, EMACB_NCR); |
| netctl |= MACB_BIT(MPE); |
| macb_writel(&macb, EMACB_NCR, netctl); |
| if (iflag) |
| enable_interrupts(); |
| |
| frame = (MACB_BF(SOF, 1) |
| | MACB_BF(RW, 2) |
| | MACB_BF(PHYA, addr) |
| | MACB_BF(REGA, reg) |
| | MACB_BF(CODE, 2)); |
| macb_writel(&macb, EMACB_MAN, frame); |
| |
| do { |
| netstat = macb_readl(&macb, EMACB_NSR); |
| } while (!(netstat & MACB_BIT(IDLE))); |
| |
| frame = macb_readl(&macb, EMACB_MAN); |
| *value = MACB_BFEXT(DATA, frame); |
| |
| iflag = disable_interrupts(); |
| netctl = macb_readl(&macb, EMACB_NCR); |
| netctl &= ~MACB_BIT(MPE); |
| macb_writel(&macb, EMACB_NCR, netctl); |
| if (iflag) |
| enable_interrupts(); |
| |
| return 0; |
| } |
| |
| int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value) |
| { |
| unsigned long netctl; |
| unsigned long netstat; |
| unsigned long frame; |
| int iflag; |
| |
| iflag = disable_interrupts(); |
| netctl = macb_readl(&macb, EMACB_NCR); |
| netctl |= MACB_BIT(MPE); |
| macb_writel(&macb, EMACB_NCR, netctl); |
| if (iflag) |
| enable_interrupts(); |
| |
| frame = (MACB_BF(SOF, 1) |
| | MACB_BF(RW, 1) |
| | MACB_BF(PHYA, addr) |
| | MACB_BF(REGA, reg) |
| | MACB_BF(CODE, 2) |
| | MACB_BF(DATA, value)); |
| macb_writel(&macb, EMACB_MAN, frame); |
| |
| do { |
| netstat = macb_readl(&macb, EMACB_NSR); |
| } while (!(netstat & MACB_BIT(IDLE))); |
| |
| iflag = disable_interrupts(); |
| netctl = macb_readl(&macb, EMACB_NCR); |
| netctl &= ~MACB_BIT(MPE); |
| macb_writel(&macb, EMACB_NCR, netctl); |
| if (iflag) |
| enable_interrupts(); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| #endif /* CONFIG_MACB */ |