| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2016 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <clock_legacy.h> |
| #include <fdt_support.h> |
| #include <init.h> |
| #include <asm/arch/immap_ls102xa.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/fsl_serdes.h> |
| #include <asm/arch/ls102xa_stream_id.h> |
| |
| #include <asm/arch/ls102xa_devdis.h> |
| #include <asm/arch/ls102xa_soc.h> |
| #include <fsl_csu.h> |
| #include <fsl_immap.h> |
| #include <netdev.h> |
| #include <fsl_mdio.h> |
| #include <tsec.h> |
| #include <spl.h> |
| |
| #include <fsl_validate.h> |
| #include "../common/sleep.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define DDR_SIZE 0x40000000 |
| |
| |
| int checkboard(void) |
| { |
| puts("Board: LS1021AIOT\n"); |
| |
| #ifndef CONFIG_QSPI_BOOT |
| struct ccsr_gur *dcfg = (struct ccsr_gur *)CONFIG_SYS_FSL_GUTS_ADDR; |
| u32 cpldrev; |
| |
| cpldrev = in_be32(&dcfg->gpporcr1); |
| |
| printf("CPLD: V%d.%d\n", ((cpldrev >> 28) & 0xf), ((cpldrev >> 24) & |
| 0xf)); |
| #endif |
| return 0; |
| } |
| |
| void ddrmc_init(void) |
| { |
| struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR; |
| u32 temp_sdram_cfg, tmp; |
| |
| out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG); |
| |
| out_be32(&ddr->cs0_bnds, DDR_CS0_BNDS); |
| out_be32(&ddr->cs0_config, DDR_CS0_CONFIG); |
| |
| out_be32(&ddr->timing_cfg_0, DDR_TIMING_CFG_0); |
| out_be32(&ddr->timing_cfg_1, DDR_TIMING_CFG_1); |
| out_be32(&ddr->timing_cfg_2, DDR_TIMING_CFG_2); |
| out_be32(&ddr->timing_cfg_3, DDR_TIMING_CFG_3); |
| out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4); |
| out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5); |
| |
| out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2); |
| out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2); |
| |
| out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE); |
| out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2); |
| |
| out_be32(&ddr->sdram_interval, DDR_SDRAM_INTERVAL); |
| |
| out_be32(&ddr->ddr_wrlvl_cntl, DDR_DDR_WRLVL_CNTL); |
| |
| out_be32(&ddr->ddr_wrlvl_cntl_2, DDR_DDR_WRLVL_CNTL_2); |
| out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3); |
| |
| out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1); |
| |
| out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL); |
| out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL); |
| |
| out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2); |
| |
| /* DDR erratum A-009942 */ |
| tmp = in_be32(&ddr->debug[28]); |
| out_be32(&ddr->debug[28], tmp | 0x0070006f); |
| |
| udelay(500); |
| |
| temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN & ~SDRAM_CFG_BI); |
| |
| out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | temp_sdram_cfg); |
| } |
| |
| int dram_init(void) |
| { |
| #if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) |
| ddrmc_init(); |
| #endif |
| |
| erratum_a008850_post(); |
| |
| gd->ram_size = DDR_SIZE; |
| return 0; |
| } |
| |
| #ifdef CONFIG_TSEC_ENET |
| int board_eth_init(bd_t *bis) |
| { |
| struct fsl_pq_mdio_info mdio_info; |
| struct tsec_info_struct tsec_info[4]; |
| int num = 0; |
| |
| #ifdef CONFIG_TSEC1 |
| SET_STD_TSEC_INFO(tsec_info[num], 1); |
| if (is_serdes_configured(SGMII_TSEC1)) { |
| puts("eTSEC1 is in sgmii mode.\n"); |
| tsec_info[num].flags |= TSEC_SGMII; |
| } |
| num++; |
| #endif |
| #ifdef CONFIG_TSEC2 |
| SET_STD_TSEC_INFO(tsec_info[num], 2); |
| if (is_serdes_configured(SGMII_TSEC2)) { |
| puts("eTSEC2 is in sgmii mode.\n"); |
| tsec_info[num].flags |= TSEC_SGMII; |
| } |
| num++; |
| #endif |
| if (!num) { |
| printf("No TSECs initialized\n"); |
| return 0; |
| } |
| |
| mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; |
| mdio_info.name = DEFAULT_MII_NAME; |
| fsl_pq_mdio_init(bis, &mdio_info); |
| |
| tsec_eth_init(bis, tsec_info, num); |
| |
| return pci_eth_init(bis); |
| } |
| #endif |
| |
| int board_early_init_f(void) |
| { |
| struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; |
| |
| #ifdef CONFIG_TSEC_ENET |
| /* clear BD & FR bits for BE BD's and frame data */ |
| clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); |
| out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); |
| |
| #endif |
| |
| arch_soc_init(); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| void board_init_f(ulong dummy) |
| { |
| /* Clear the BSS */ |
| memset(__bss_start, 0, __bss_end - __bss_start); |
| |
| get_clocks(); |
| |
| preloader_console_init(); |
| |
| dram_init(); |
| |
| /* Allow OCRAM access permission as R/W */ |
| |
| #ifdef CONFIG_LAYERSCAPE_NS_ACCESS |
| enable_layerscape_ns_access(); |
| #endif |
| |
| board_init_r(NULL, 0); |
| } |
| #endif |
| |
| int board_init(void) |
| { |
| #ifndef CONFIG_SYS_FSL_NO_SERDES |
| fsl_serdes_init(); |
| #endif |
| |
| ls102xa_smmu_stream_id_init(); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_BOARD_LATE_INIT |
| int board_late_init(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_MISC_INIT_R) |
| int misc_init_r(void) |
| { |
| #ifdef CONFIG_FSL_DEVICE_DISABLE |
| device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl)); |
| |
| #endif |
| |
| #ifdef CONFIG_FSL_CAAM |
| return sec_init(); |
| #endif |
| } |
| #endif |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| |
| #ifdef CONFIG_PCI |
| ft_pci_setup(blob, bd); |
| #endif |
| |
| return 0; |
| } |
| |
| void flash_write16(u16 val, void *addr) |
| { |
| u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00)); |
| |
| __raw_writew(shftval, addr); |
| } |
| |
| u16 flash_read16(void *addr) |
| { |
| u16 val = __raw_readw(addr); |
| |
| return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); |
| } |