| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Board configuration file for Dragonboard 410C |
| * |
| * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> |
| */ |
| |
| #ifndef __CONFIGS_DRAGONBOARD410C_H |
| #define __CONFIGS_DRAGONBOARD410C_H |
| |
| #include <linux/sizes.h> |
| #include <asm/arch/sysmap-apq8016.h> |
| |
| /* Physical Memory Map */ |
| #define PHYS_SDRAM_1 0x80000000 |
| /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/ |
| #define PHYS_SDRAM_1_SIZE 0x3da00000 |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) |
| #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) |
| #define CONFIG_SYS_BOOTM_LEN SZ_64M |
| |
| /* UART */ |
| |
| /* Generic Timer Definitions */ |
| #define COUNTER_FREQUENCY 19000000 |
| |
| /* Fixup - in init code we switch from device to host mode, |
| * it has to be done after each HCD reset */ |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| |
| /* BOOTP options */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(USB, usb, 0) \ |
| func(MMC, mmc, 1) \ |
| func(MMC, mmc, 0) \ |
| func(DHCP, dhcp, na) |
| |
| #include <config_distro_bootcmd.h> |
| |
| /* Does what recovery does */ |
| #define REFLASH(file, part) \ |
| "part start mmc 0 "#part" start && "\ |
| "part size mmc 0 "#part" size && "\ |
| "tftp $loadaddr "#file" && " \ |
| "mmc write $loadaddr $start $size && " |
| |
| #define CONFIG_ENV_REFLASH \ |
| "mmc dev 0 && "\ |
| "usb start && "\ |
| "dhcp && "\ |
| "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\ |
| "mmc write $loadaddr 0 43 && " \ |
| "mmc rescan && "\ |
| REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\ |
| REFLASH(dragonboard/rescue/sbl1.mbn, 2)\ |
| REFLASH(dragonboard/rescue/rpm.mbn, 3)\ |
| REFLASH(dragonboard/rescue/tz.mbn, 4)\ |
| REFLASH(dragonboard/rescue/hyp.mbn, 5)\ |
| REFLASH(dragonboard/rescue/sec.dat, 6)\ |
| REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\ |
| REFLASH(dragonboard/u-boot.img, 8)\ |
| "usb stop &&"\ |
| "echo Reflash completed" |
| |
| /* Environment */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "reflash="CONFIG_ENV_REFLASH"\0"\ |
| "loadaddr=0x81000000\0" \ |
| "fdt_high=0xffffffffffffffff\0" \ |
| "initrd_high=0xffffffffffffffff\0" \ |
| "linux_image=Image\0" \ |
| "kernel_addr_r=0x81000000\0"\ |
| "fdtfile=qcom/apq8016-sbc.dtb\0" \ |
| "fdt_addr_r=0x83000000\0"\ |
| "ramdisk_addr_r=0x84000000\0"\ |
| "scriptaddr=0x90000000\0"\ |
| "pxefile_addr_r=0x90100000\0"\ |
| BOOTENV |
| |
| #define CONFIG_SYS_MMC_ENV_DEV 0 /* mmc0 = emmc, mmc1 = sd */ |
| #define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */ |
| |
| /* Size of malloc() pool */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) |
| |
| /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 64 /* max command args */ |
| |
| #endif |