| if ARCH_OMAP2PLUS |
| |
| choice |
| prompt "OMAP2+ platform select" |
| default TARGET_BRXRE1 |
| |
| config TARGET_BRXRE1 |
| bool "Support BRXRE1" |
| select BOARD_LATE_INIT |
| |
| config TARGET_BRPPT1 |
| bool "Support BRPPT1" |
| select BOARD_LATE_INIT |
| |
| config TARGET_DRACO |
| bool "Support draco" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| select DM_GPIO |
| |
| config TARGET_THUBAN |
| bool "Support thuban" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| select DM_GPIO |
| |
| config TARGET_RASTABAN |
| bool "Support rastaban" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| select DM_GPIO |
| |
| config TARGET_ETAMIN |
| bool "Support etamin" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| select DM_GPIO |
| |
| config TARGET_PXM2 |
| bool "Support pxm2" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| select DM_GPIO |
| |
| config TARGET_RUT |
| bool "Support rut" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| select DM_GPIO |
| |
| config OMAP34XX |
| bool "OMAP34XX SoC" |
| select ARM_ERRATA_430973 |
| select ARM_ERRATA_454179 |
| select ARM_ERRATA_621766 |
| select ARM_ERRATA_725233 |
| select USE_TINY_PRINTF |
| imply SPL_EXT_SUPPORT |
| imply SPL_FAT_SUPPORT |
| imply SPL_GPIO_SUPPORT |
| imply SPL_I2C_SUPPORT |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_MMC_SUPPORT |
| imply SPL_NAND_SUPPORT |
| imply SPL_POWER_SUPPORT |
| imply SPL_SERIAL_SUPPORT |
| imply SYS_THUMB_BUILD |
| imply TWL4030_POWER |
| |
| config OMAP44XX |
| bool "OMAP44XX SoC" |
| select USE_TINY_PRINTF |
| imply SPL_DISPLAY_PRINT |
| imply SPL_EXT_SUPPORT |
| imply SPL_FAT_SUPPORT |
| imply SPL_GPIO_SUPPORT |
| imply SPL_I2C_SUPPORT |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_MMC_SUPPORT |
| imply SPL_NAND_SUPPORT |
| imply SPL_POWER_SUPPORT |
| imply SPL_SERIAL_SUPPORT |
| imply SYS_THUMB_BUILD |
| |
| config OMAP54XX |
| bool "OMAP54XX SoC" |
| select ARM_ERRATA_798870 |
| select SYS_THUMB_BUILD |
| imply SPL_DISPLAY_PRINT |
| imply SPL_ENV_SUPPORT |
| imply SPL_EXT_SUPPORT |
| imply SPL_FAT_SUPPORT |
| imply SPL_GPIO_SUPPORT |
| imply SPL_I2C_SUPPORT |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_MMC_SUPPORT |
| imply SPL_NAND_SUPPORT |
| imply SPL_POWER_SUPPORT |
| imply SPL_SERIAL_SUPPORT |
| |
| config TI814X |
| bool "TI814X SoC" |
| help |
| Support for AM335x SOC from Texas Instruments. |
| The AM335x high performance SOC features a Cortex-A8 |
| ARM core and more. |
| |
| config TI816X |
| bool "TI816X SoC" |
| help |
| Support for AM335x SOC from Texas Instruments. |
| The AM335x high performance SOC features a Cortex-A8 |
| ARM core and more. |
| |
| config AM43XX |
| bool "AM43XX SoC" |
| imply SPL_DM |
| imply SPL_DM_SEQ_ALIAS |
| imply SPL_OF_CONTROL |
| imply SPL_OF_TRANSLATE |
| imply SPL_SEPARATE_BSS |
| imply SPL_SYS_MALLOC_SIMPLE |
| imply SYS_THUMB_BUILD |
| help |
| Support for AM43xx SOC from Texas Instruments. |
| The AM43xx high performance SOC features a Cortex-A9 |
| ARM core, a quad core PRU-ICSS for industrial Ethernet |
| protocols, dual camera support, optional 3D graphics |
| and an optional customer programmable secure boot. |
| |
| config AM33XX |
| bool "AM33XX SoC" |
| imply SYS_THUMB_BUILD |
| imply USE_TINY_PRINTF |
| help |
| Support for AM335x SOC from Texas Instruments. |
| The AM335x high performance SOC features a Cortex-A8 |
| ARM core, a dual core PRU-ICSS for industrial Ethernet |
| protocols, optional 3D graphics and an optional customer |
| programmable secure boot. |
| |
| config TARGET_CM_T43 |
| bool "Support cm_t43" |
| |
| endchoice |
| |
| config SYS_MPUCLK |
| int "MPU CLK speed" |
| default 500 |
| help |
| Defines the MPU clock speed (in MHz). |
| |
| config TI_SECURE_DEVICE |
| bool "HS Device Type Support" |
| depends on OMAP54XX || AM43XX || AM33XX || ARCH_KEYSTONE |
| help |
| If a high secure (HS) device type is being used, this config |
| must be set. This option impacts various aspects of the |
| build system (to create signed boot images that can be |
| authenticated) and the code. See the doc/README.ti-secure |
| file for further details. |
| |
| source "arch/arm/mach-omap2/omap3/Kconfig" |
| |
| source "arch/arm/mach-omap2/omap4/Kconfig" |
| |
| source "arch/arm/mach-omap2/omap5/Kconfig" |
| |
| source "arch/arm/mach-omap2/am33xx/Kconfig" |
| |
| source "board/BuR/brxre1/Kconfig" |
| source "board/BuR/brppt1/Kconfig" |
| source "board/siemens/draco/Kconfig" |
| source "board/siemens/pxm2/Kconfig" |
| source "board/siemens/rut/Kconfig" |
| source "board/ti/ti814x/Kconfig" |
| source "board/ti/ti816x/Kconfig" |
| source "board/ti/am43xx/Kconfig" |
| source "board/ti/am335x/Kconfig" |
| source "board/compulab/cm_t335/Kconfig" |
| source "board/compulab/cm_t43/Kconfig" |
| |
| endif |