| /* SPDX-License-Identifier: GPL-2.0 OR IBM-pibs */ |
| /* |
| * Additions (C) Copyright 2009 Industrie Dial Face S.p.A. |
| */ |
| /*----------------------------------------------------------------------------+ |
| | |
| | File Name: miiphy.h |
| | |
| | Function: Include file defining PHY registers. |
| | |
| | Author: Mark Wisner |
| | |
| +----------------------------------------------------------------------------*/ |
| #ifndef _miiphy_h_ |
| #define _miiphy_h_ |
| |
| #include <common.h> |
| #include <linux/mii.h> |
| #include <linux/list.h> |
| #include <net.h> |
| #include <phy.h> |
| |
| int miiphy_read(const char *devname, unsigned char addr, unsigned char reg, |
| unsigned short *value); |
| int miiphy_write(const char *devname, unsigned char addr, unsigned char reg, |
| unsigned short value); |
| int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui, |
| unsigned char *model, unsigned char *rev); |
| int miiphy_reset(const char *devname, unsigned char addr); |
| int miiphy_speed(const char *devname, unsigned char addr); |
| int miiphy_duplex(const char *devname, unsigned char addr); |
| int miiphy_is_1000base_x(const char *devname, unsigned char addr); |
| #ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
| int miiphy_link(const char *devname, unsigned char addr); |
| #endif |
| |
| void miiphy_init(void); |
| |
| int miiphy_set_current_dev(const char *devname); |
| const char *miiphy_get_current_dev(void); |
| struct mii_dev *mdio_get_current_dev(void); |
| struct mii_dev *miiphy_get_dev_by_name(const char *devname); |
| struct phy_device *mdio_phydev_for_ethname(const char *devname); |
| |
| void miiphy_listdev(void); |
| |
| struct mii_dev *mdio_alloc(void); |
| void mdio_free(struct mii_dev *bus); |
| int mdio_register(struct mii_dev *bus); |
| |
| /** |
| * mdio_register_seq - Register mdio bus with sequence number |
| * @bus: mii device structure |
| * @seq: sequence number |
| * |
| * Return: 0 if success, negative value if error |
| */ |
| int mdio_register_seq(struct mii_dev *bus, int seq); |
| int mdio_unregister(struct mii_dev *bus); |
| void mdio_list_devices(void); |
| |
| #ifdef CONFIG_BITBANGMII |
| |
| #define BB_MII_DEVNAME "bb_miiphy" |
| |
| struct bb_miiphy_bus { |
| char name[16]; |
| int (*init)(struct bb_miiphy_bus *bus); |
| int (*mdio_active)(struct bb_miiphy_bus *bus); |
| int (*mdio_tristate)(struct bb_miiphy_bus *bus); |
| int (*set_mdio)(struct bb_miiphy_bus *bus, int v); |
| int (*get_mdio)(struct bb_miiphy_bus *bus, int *v); |
| int (*set_mdc)(struct bb_miiphy_bus *bus, int v); |
| int (*delay)(struct bb_miiphy_bus *bus); |
| #ifdef CONFIG_BITBANGMII_MULTI |
| void *priv; |
| #endif |
| }; |
| |
| extern struct bb_miiphy_bus bb_miiphy_buses[]; |
| extern int bb_miiphy_buses_num; |
| |
| void bb_miiphy_init(void); |
| int bb_miiphy_read(struct mii_dev *miidev, int addr, int devad, int reg); |
| int bb_miiphy_write(struct mii_dev *miidev, int addr, int devad, int reg, |
| u16 value); |
| #endif |
| |
| /* phy seed setup */ |
| #define AUTO 99 |
| #define _1000BASET 1000 |
| #define _100BASET 100 |
| #define _10BASET 10 |
| #define HALF 22 |
| #define FULL 44 |
| |
| /* phy register offsets */ |
| #define MII_MIPSCR 0x11 |
| |
| /* MII_LPA */ |
| #define PHY_ANLPAR_PSB_802_3 0x0001 |
| #define PHY_ANLPAR_PSB_802_9 0x0002 |
| |
| /* MII_CTRL1000 masks */ |
| #define PHY_1000BTCR_1000FD 0x0200 |
| #define PHY_1000BTCR_1000HD 0x0100 |
| |
| /* MII_STAT1000 masks */ |
| #define PHY_1000BTSR_MSCF 0x8000 |
| #define PHY_1000BTSR_MSCR 0x4000 |
| #define PHY_1000BTSR_LRS 0x2000 |
| #define PHY_1000BTSR_RRS 0x1000 |
| #define PHY_1000BTSR_1000FD 0x0800 |
| #define PHY_1000BTSR_1000HD 0x0400 |
| |
| /* phy EXSR */ |
| #define ESTATUS_1000XF 0x8000 |
| #define ESTATUS_1000XH 0x4000 |
| |
| #endif |