| /* |
| * (C) Copyright 2003 |
| * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. |
| * |
| * Configuration for the Logotronic DL board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * include/configs/logodl.h - configuration options, board specific |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ |
| #define CONFIG_GEALOG 1 /* on a Logotronic GEALOG SG board */ |
| |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| /* for timer/console/ethernet */ |
| /* |
| * Hardware drivers |
| */ |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_FFUART 1 /* we use FFUART */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 19200 |
| #undef CONFIG_MISC_INIT_R /* FIXME: misc_init_r() missing */ |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_ECHO |
| #define CONFIG_CMD_SAVEENV |
| #define CONFIG_CMD_FLASH |
| #define CONFIG_CMD_MEMORY |
| #define CONFIG_CMD_RUN |
| |
| |
| #define CONFIG_BOOTDELAY 3 |
| /* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ |
| #define CONFIG_BOOTARGS "console=ttyS0,19200" |
| #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF |
| #define CONFIG_NETMASK 255.255.255.0 |
| #define CONFIG_IPADDR 192.168.1.56 |
| #define CONFIG_SERVERIP 192.168.1.2 |
| #define CONFIG_BOOTCOMMAND "bootm 0x40000" |
| #define CONFIG_SHOW_BOOT_PROGRESS |
| |
| #define CONFIG_CMDLINE_TAG 1 |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| |
| /* |
| * Size of malloc() pool; this lives below the uppermost 128 KiB which are |
| * used for the RAM copy of the uboot code |
| * |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (256*1024) |
| |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0x08000000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x0800ffff /* 64 KiB */ |
| |
| #undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x08000000 /* load kernel to this address */ |
| |
| #define CONFIG_SYS_HZ 1000 |
| /* RS: the oscillator is actually 3680130?? */ |
| |
| #define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ |
| /* 0101000001 */ |
| /* ^^^^^ Memory Speed 99.53 MHz */ |
| /* ^^ Run Mode Speed = 2x Mem Speed */ |
| /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ |
| |
| #define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ |
| |
| /* valid baudrates */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /* |
| * SMSC91C111 Network Card |
| */ |
| #if 0 |
| #define CONFIG_DRIVER_SMC91111 1 |
| #define CONFIG_SMC91111_BASE 0x10000000 /* chip select 4 */ |
| #undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ |
| #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ |
| #undef CONFIG_SHOW_ACTIVITY |
| #define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ |
| #endif |
| |
| /* |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /* |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of RAM */ |
| #define PHYS_SDRAM_1 0x08000000 /* SRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE (4*1024*1024) /* 4 MB */ |
| |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */ |
| #define PHYS_FLASH_SIZE (32*1024*1024) /* 32 MB */ |
| |
| #define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1 /* RAM starts here */ |
| #define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE |
| |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| |
| |
| /* |
| * GPIO settings |
| * |
| * GP?? == FOOBAR is 0/1 |
| */ |
| |
| #define _BIT0 0x00000001 |
| #define _BIT1 0x00000002 |
| #define _BIT2 0x00000004 |
| #define _BIT3 0x00000008 |
| |
| #define _BIT4 0x00000010 |
| #define _BIT5 0x00000020 |
| #define _BIT6 0x00000040 |
| #define _BIT7 0x00000080 |
| |
| #define _BIT8 0x00000100 |
| #define _BIT9 0x00000200 |
| #define _BIT10 0x00000400 |
| #define _BIT11 0x00000800 |
| |
| #define _BIT12 0x00001000 |
| #define _BIT13 0x00002000 |
| #define _BIT14 0x00004000 |
| #define _BIT15 0x00008000 |
| |
| #define _BIT16 0x00010000 |
| #define _BIT17 0x00020000 |
| #define _BIT18 0x00040000 |
| #define _BIT19 0x00080000 |
| |
| #define _BIT20 0x00100000 |
| #define _BIT21 0x00200000 |
| #define _BIT22 0x00400000 |
| #define _BIT23 0x00800000 |
| |
| #define _BIT24 0x01000000 |
| #define _BIT25 0x02000000 |
| #define _BIT26 0x04000000 |
| #define _BIT27 0x08000000 |
| |
| #define _BIT28 0x10000000 |
| #define _BIT29 0x20000000 |
| #define _BIT30 0x40000000 |
| #define _BIT31 0x80000000 |
| |
| |
| #define CONFIG_SYS_LED_A_BIT (_BIT18) |
| #define CONFIG_SYS_LED_A_SR GPSR0 |
| #define CONFIG_SYS_LED_A_CR GPCR0 |
| |
| #define CONFIG_SYS_LED_B_BIT (_BIT16) |
| #define CONFIG_SYS_LED_B_SR GPSR1 |
| #define CONFIG_SYS_LED_B_CR GPCR1 |
| |
| |
| /* LED A: off, LED B: off */ |
| #define CONFIG_SYS_GPSR0_VAL (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT18) |
| #define CONFIG_SYS_GPSR1_VAL (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25 +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13) |
| #define CONFIG_SYS_GPSR2_VAL (_BIT14+_BIT15+_BIT16) |
| |
| #define CONFIG_SYS_GPCR0_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR1_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR2_VAL 0x00000000 |
| |
| #define CONFIG_SYS_GPDR0_VAL (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT17+_BIT18) |
| #define CONFIG_SYS_GPDR1_VAL (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25 +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13) |
| #define CONFIG_SYS_GPDR2_VAL (_BIT14+_BIT15+_BIT16) |
| |
| #define CONFIG_SYS_GAFR0_L_VAL (_BIT22+_BIT24+_BIT31) |
| #define CONFIG_SYS_GAFR0_U_VAL (_BIT15+_BIT17+_BIT19+\ |
| _BIT20+_BIT22+_BIT24+_BIT26+_BIT29+_BIT31) |
| #define CONFIG_SYS_GAFR1_L_VAL (_BIT3+_BIT4+_BIT6+_BIT8+_BIT10+_BIT12+_BIT15+_BIT17+_BIT19+\ |
| _BIT20+_BIT23+_BIT24+_BIT27+_BIT28+_BIT31) |
| #define CONFIG_SYS_GAFR1_U_VAL (_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31) |
| #define CONFIG_SYS_GAFR2_L_VAL (_BIT1+_BIT3+_BIT5+_BIT7+_BIT9+_BIT11+_BIT13+_BIT15+_BIT17+\ |
| _BIT19+_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31) |
| #define CONFIG_SYS_GAFR2_U_VAL (_BIT1) |
| |
| #define CONFIG_SYS_PSSR_VAL (0x20) |
| |
| /* |
| * Memory settings |
| */ |
| #define CONFIG_SYS_MSC0_VAL 0x123c2980 |
| #define CONFIG_SYS_MSC1_VAL 0x123c2661 |
| #define CONFIG_SYS_MSC2_VAL 0x7ff87ff8 |
| |
| |
| /* no sdram/pcmcia here */ |
| #define CONFIG_SYS_MDCNFG_VAL 0x00000000 |
| #define CONFIG_SYS_MDREFR_VAL 0x00000000 |
| #define CONFIG_SYS_MDREFR_VAL_100 0x00000000 |
| #define CONFIG_SYS_MDMRS_VAL 0x00000000 |
| |
| /* only SRAM */ |
| #define SXCNFG_SETTINGS 0x00000000 |
| |
| /* |
| * PCMCIA and CF Interfaces |
| */ |
| |
| #define CONFIG_SYS_MECR_VAL 0x00000000 |
| #define CONFIG_SYS_MCMEM0_VAL 0x00010504 |
| #define CONFIG_SYS_MCMEM1_VAL 0x00010504 |
| #define CONFIG_SYS_MCATT0_VAL 0x00010504 |
| #define CONFIG_SYS_MCATT1_VAL 0x00010504 |
| #define CONFIG_SYS_MCIO0_VAL 0x00004715 |
| #define CONFIG_SYS_MCIO1_VAL 0x00004715 |
| |
| |
| /* |
| * FLASH and environment organization |
| */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
| |
| /* timeout values are in ticks */ |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ |
| |
| /* FIXME */ |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ |
| #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
| |
| #endif /* __CONFIG_H */ |