blob: 11154c63a83e649dcdfbab56c01a035d48a66381 [file] [log] [blame]
/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <MCD_dma.h>
#include <asm/immap.h>
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
volatile xlbarb_t *xlbarb = (volatile xlbarb_t *) MMAP_XARB;
xlbarb->adrto = 0x2000;
xlbarb->datto = 0x2000;
xlbarb->busto = 0x3000;
xlbarb->cfg = XARB_SR_AT | XARB_SR_DT;
/* Master Priority Enable */
xlbarb->pri = 0;
xlbarb->prien = 0xff;
#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
fbcs->csar0 = CFG_CS0_BASE;
fbcs->cscr0 = CFG_CS0_CTRL;
fbcs->csmr0 = CFG_CS0_MASK;
#endif
#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
fbcs->csar1 = CFG_CS1_BASE;
fbcs->cscr1 = CFG_CS1_CTRL;
fbcs->csmr1 = CFG_CS1_MASK;
#endif
#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
fbcs->csar2 = CFG_CS2_BASE;
fbcs->cscr2 = CFG_CS2_CTRL;
fbcs->csmr2 = CFG_CS2_MASK;
#endif
#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
fbcs->csar3 = CFG_CS3_BASE;
fbcs->cscr3 = CFG_CS3_CTRL;
fbcs->csmr3 = CFG_CS3_MASK;
#endif
#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
fbcs->csar4 = CFG_CS4_BASE;
fbcs->cscr4 = CFG_CS4_CTRL;
fbcs->csmr4 = CFG_CS4_MASK;
#endif
#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
fbcs->csar5 = CFG_CS5_BASE;
fbcs->cscr5 = CFG_CS5_CTRL;
fbcs->csmr5 = CFG_CS5_MASK;
#endif
#ifdef CONFIG_FSL_I2C
gpio->par_feci2cirq = GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA;
#endif
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
#if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC)
MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512),
MCD_RELOC_TASKS);
#endif
return (0);
}
void uart_port_conf(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
volatile u8 *pscsicr = (u8 *) (CFG_UART_BASE + 0x40);
/* Setup Ports: */
switch (CFG_UART_PORT) {
case 0:
gpio->par_psc0 = (GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
break;
case 1:
gpio->par_psc1 = (GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1);
break;
case 2:
gpio->par_psc2 = (GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2);
break;
case 3:
gpio->par_psc3 = (GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3);
break;
}
*pscsicr &= 0xF8;
}