blob: b9954b8f4a0ed8aca2a9013cec50d06a11a0ea20 [file] [log] [blame]
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_MVEBU_DB_88F3720_H
#define _CONFIG_MVEBU_DB_88F3720_H
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_SYS_TEXT_BASE 0x00000000
/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_NR_DRAM_BANKS 1
/* auto boot */
#define CONFIG_PREBOOT
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
115200, 230400, 460800, 921600 }
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_INITRD_TAG /* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
/*
* Other required minimal configurations
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
#define CONFIG_SYS_ALT_MEMTEST
/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
/*
* I2C
*/
#define CONFIG_I2C_MV
#define CONFIG_SYS_I2C_SLAVE 0x0
/*
* SPI Flash configuration
*/
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED 1000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
/* Environment in SPI NOR flash */
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
/*
* Ethernet Driver configuration
*/
#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */
#define CONFIG_ARP_TIMEOUT 200
#define CONFIG_NET_RETRY_COUNT 50
/* USB 2.0 */
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* USB 3.0 */
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
/* USB ethernet */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_RTL8152
#define CONFIG_USB_ETHER_SMSC95XX
/*
* SATA/SCSI/AHCI configuration
*/
#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
/* MMC/SD IP block */
#define CONFIG_GENERIC_MMC
#define CONFIG_SUPPORT_VFAT
#endif /* _CONFIG_MVEBU_DB_88F3720_H */