board/gdsys/intip/intip.c - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2009
  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
  *
  * Based on board/amcc/canyonlands/canyonlands.c
  * (C) Copyright 2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <asm/ppc440.h>
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <i2c.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/4xx_pcie.h>
 #include <asm/gpio.h>

 extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

 DECLARE_GLOBAL_DATA_PTR;

 #define CONFIG_SYS_BCSR3_PCIE		0x10

 int board_early_init_f(void)
 {
 	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 */
 	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC0ER, 0x00000000);	/* disable all */
 	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
 	mtdcr(UIC0PR, 0xffffffff);	/* per ref-board manual */
 	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
 	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(UIC0SR, 0xffffffff);	/* clear all */

 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC1ER, 0x00000000);	/* disable all */
 	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
 	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
 	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
 	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */

 	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC2ER, 0x00000000);	/* disable all */
 	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
 	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
 	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
 	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(UIC2SR, 0xffffffff);	/* clear all */

 	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC3ER, 0x00000000);	/* disable all */
 	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
 	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
 	mtdcr(UIC3TR, 0x00000000);	/* per ref-board manual */
 	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(UIC3SR, 0xffffffff);	/* clear all */

 	/*
 	 * Configure PFC (Pin Function Control) registers
 	 * enable GPIO 49-63
 	 * UART0: 4 pins
 	 */
 	mtsdr(SDR0_PFC0, 0x00007fff);
 	mtsdr(SDR0_PFC1, 0x00040000);

 	/* Enable PCI host functionality in SDR0_PCI0 */
 	mtsdr(SDR0_PCI0, 0xe0000000);

 	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */

 	/* Setup PLB4-AHB bridge based on the system address map */
 	mtdcr(AHB_TOP, 0x8000004B);
 	mtdcr(AHB_BOT, 0x8000004B);

 	/*
 	* Configure USB-STP pins as alternate and not GPIO
 	* It seems to be neccessary to configure the STP pins as GPIO
 	* input at powerup (perhaps while USB reset is asserted). So
 	* we configure those pins to their "real" function now.
 	*/
 	gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
 	gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);

 	/* Trigger board component reset */
 	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
 	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
 	udelay(50);
 	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffbf);
 	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffbf);
 	udelay(50);
 	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
 	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);

 	return 0;
 }

 int get_cpu_num(void)
 {
 	int cpu = NA_OR_UNKNOWN_CPU;

 	return cpu;
 }

 int checkboard(void)
 {
 	char *s = getenv("serial#");

 #ifdef CONFIG_DEVCONCENTER
 	printf("Board: DevCon-Center");
 #else
 	printf("Board: Intip");
 #endif

 	if (s != NULL) {
 		puts(", serial# ");
 		puts(s);
 	}
 	putc('\n');

 	return 0;
 }

 int board_early_init_r(void)
 {
 	/*
 	 * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
 	 * (Spansion 29GL512), but the boot EBC mapping only supports a maximum
 	 * of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
 	 * To solve this problem, the FLASH has to get remapped to another
 	 * EBC address which accepts bigger regions:
 	 *
 	 * 0xfn00.0000 -> 4.cn00.0000
 	 */

 	u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
 		EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;

 	/* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
 	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
 		| bxcr_bw
 		| EBC_BXCR_BU_RW
 		| EBC_BXCR_BW_16BIT);

 	/* Remove TLB entry of boot EBC mapping */
 	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);

 	/* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
 	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
 			CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);

 	/*
 	 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
 	 * 0xfc00.0000 is possible
 	 */

 	/*
 	 * Clear potential errors resulting from auto-calibration.
 	 * If not done, then we could get an interrupt later on when
 	 * exceptions are enabled.
 	 */
 	set_mcsr(get_mcsr());

 	return 0;
 }

 int misc_init_r(void)
 {
 	u32 sdr0_srst1 = 0;
 	u32 eth_cfg;

 	/*
 	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
 	 * This is board specific, so let's do it here.
 	 */
 	mfsdr(SDR0_ETH_CFG, eth_cfg);
 	/* disable SGMII mode */
 	eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
 		     SDR0_ETH_CFG_SGMII1_ENABLE |
 		     SDR0_ETH_CFG_SGMII0_ENABLE);
 	/* Set the for 2 RGMII mode */
 	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
 	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
 	eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
 	mtsdr(SDR0_ETH_CFG, eth_cfg);

 	/*
 	 * The AHB Bridge core is held in reset after power-on or reset
 	 * so enable it now
 	 */
 	mfsdr(SDR0_SRST1, sdr0_srst1);
 	sdr0_srst1 &= ~SDR0_SRST1_AHB;
 	mtsdr(SDR0_SRST1, sdr0_srst1);

 	return 0;
 }

 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 extern void __ft_board_setup(void *blob, bd_t *bd);

 void ft_board_setup(void *blob, bd_t *bd)
 {
 	__ft_board_setup(blob, bd);

 	fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
 			     "disabled", sizeof("disabled"), 1);

 	fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
 			     "disabled", sizeof("disabled"), 1);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
	/*
	* (C) Copyright 2009
	* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
	*
	* Based on board/amcc/canyonlands/canyonlands.c
	* (C) Copyright 2008
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <asm/ppc440.h>
	#include <libfdt.h>
	#include <fdt_support.h>
	#include <i2c.h>
	#include <asm/processor.h>
	#include <asm/io.h>
	#include <asm/mmu.h>
	#include <asm/4xx_pcie.h>
	#include <asm/gpio.h>

	extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

	DECLARE_GLOBAL_DATA_PTR;

	#define CONFIG_SYS_BCSR3_PCIE 0x10

	int board_early_init_f(void)
	{
	/*
	* Setup the interrupt controller polarities, triggers, etc.
	*/
	mtdcr(UIC0SR, 0xffffffff); /* clear all */
	mtdcr(UIC0ER, 0x00000000); /* disable all */
	mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
	mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */
	mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
	mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
	mtdcr(UIC0SR, 0xffffffff); /* clear all */

	mtdcr(UIC1SR, 0xffffffff); /* clear all */
	mtdcr(UIC1ER, 0x00000000); /* disable all */
	mtdcr(UIC1CR, 0x00000000); /* all non-critical */
	mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
	mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
	mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
	mtdcr(UIC1SR, 0xffffffff); /* clear all */

	mtdcr(UIC2SR, 0xffffffff); /* clear all */
	mtdcr(UIC2ER, 0x00000000); /* disable all */
	mtdcr(UIC2CR, 0x00000000); /* all non-critical */
	mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
	mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
	mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
	mtdcr(UIC2SR, 0xffffffff); /* clear all */

	mtdcr(UIC3SR, 0xffffffff); /* clear all */
	mtdcr(UIC3ER, 0x00000000); /* disable all */
	mtdcr(UIC3CR, 0x00000000); /* all non-critical */
	mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
	mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */
	mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
	mtdcr(UIC3SR, 0xffffffff); /* clear all */

	/*
	* Configure PFC (Pin Function Control) registers
	* enable GPIO 49-63
	* UART0: 4 pins
	*/
	mtsdr(SDR0_PFC0, 0x00007fff);
	mtsdr(SDR0_PFC1, 0x00040000);

	/* Enable PCI host functionality in SDR0_PCI0 */
	mtsdr(SDR0_PCI0, 0xe0000000);

	mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */

	/* Setup PLB4-AHB bridge based on the system address map */
	mtdcr(AHB_TOP, 0x8000004B);
	mtdcr(AHB_BOT, 0x8000004B);

	/*
	* Configure USB-STP pins as alternate and not GPIO
	* It seems to be neccessary to configure the STP pins as GPIO
	* input at powerup (perhaps while USB reset is asserted). So
	* we configure those pins to their "real" function now.
	*/
	gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
	gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);

	/* Trigger board component reset */
	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
	udelay(50);
	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffbf);
	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffbf);
	udelay(50);
	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);

	return 0;
	}

	int get_cpu_num(void)
	{
	int cpu = NA_OR_UNKNOWN_CPU;

	return cpu;
	}

	int checkboard(void)
	{
	char *s = getenv("serial#");

	#ifdef CONFIG_DEVCONCENTER
	printf("Board: DevCon-Center");
	#else
	printf("Board: Intip");
	#endif

	if (s != NULL) {
	puts(", serial# ");
	puts(s);
	}
	putc('\n');

	return 0;
	}

	int board_early_init_r(void)
	{
	/*
	* CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
	* (Spansion 29GL512), but the boot EBC mapping only supports a maximum
	* of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
	* To solve this problem, the FLASH has to get remapped to another
	* EBC address which accepts bigger regions:
	*
	* 0xfn00.0000 -> 4.cn00.0000
	*/

	u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
	EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;

	/* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
	\| bxcr_bw
	\| EBC_BXCR_BU_RW
	\| EBC_BXCR_BW_16BIT);

	/* Remove TLB entry of boot EBC mapping */
	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);

	/* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
	CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);

	/*
	* Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
	* 0xfc00.0000 is possible
	*/

	/*
	* Clear potential errors resulting from auto-calibration.
	* If not done, then we could get an interrupt later on when
	* exceptions are enabled.
	*/
	set_mcsr(get_mcsr());

	return 0;
	}

	int misc_init_r(void)
	{
	u32 sdr0_srst1 = 0;
	u32 eth_cfg;

	/*
	* Set EMAC mode/configuration (GMII, SGMII, RGMII...).
	* This is board specific, so let's do it here.
	*/
	mfsdr(SDR0_ETH_CFG, eth_cfg);
	/* disable SGMII mode */
	eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE \|
	SDR0_ETH_CFG_SGMII1_ENABLE \|
	SDR0_ETH_CFG_SGMII0_ENABLE);
	/* Set the for 2 RGMII mode */
	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
	eth_cfg \|= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
	mtsdr(SDR0_ETH_CFG, eth_cfg);

	/*
	* The AHB Bridge core is held in reset after power-on or reset
	* so enable it now
	*/
	mfsdr(SDR0_SRST1, sdr0_srst1);
	sdr0_srst1 &= ~SDR0_SRST1_AHB;
	mtsdr(SDR0_SRST1, sdr0_srst1);

	return 0;
	}

	#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
	extern void __ft_board_setup(void blob, bd_t bd);

	void ft_board_setup(void blob, bd_t bd)
	{
	__ft_board_setup(blob, bd);

	fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
	"disabled", sizeof("disabled"), 1);

	fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
	"disabled", sizeof("disabled"), 1);
	}
	#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */