| # |
| # The commands in this table are sorted alphabetically by the |
| # command name and in descending order by the command name string |
| # length. This is to prevent conflicts in command name parsing. |
| # Please ensure that new commands are added according to that rule. |
| # See $(TOPDIR)/common/command.c |
| # |
| ######################## |
| # |
| # command length |
| # |
| ######################## |
| askenv 8 |
| as 2 |
| autoscr 5 |
| base 2 |
| bdinfo 2 |
| bmp 3 |
| bootelf 7 |
| bootm 5 |
| bootp 5 |
| bootvx 6 |
| bootd 4 |
| break 2 |
| brginfo 3 |
| carinfo 3 |
| chpart 6 |
| cmp 3 |
| coninfo 5 |
| continue 4 |
| cp 2 |
| crc32 3 |
| date 3 |
| dcache 2 |
| dhcp 4 |
| dmainfo 3 |
| ds 2 |
| dtt 3 |
| echo 4 |
| eeprom 3 |
| erase 3 |
| fccinfo 3 |
| fdcboot 4 |
| flinfo 3 |
| fpga 4 |
| fsinfo 5 |
| fsload 5 |
| getdcr 6 # IBM 4XX DCR registers |
| go 2 |
| help 1 |
| i2cinfo 4 |
| i2c 3 |
| icache 2 |
| icinfo 3 |
| ide 3 |
| iminfo 3 |
| iopinfo 3 |
| irqinfo 3 |
| kgdb 4 |
| loadb 5 |
| loads 5 |
| loop 4 |
| ls 2 |
| mccinfo 3 |
| md 2 |
| memcinfo 4 |
| mii 3 |
| mm 2 |
| mtest 5 |
| muxinfo 3 |
| mw 2 |
| nand 3 |
| nboot 4 |
| next 4 |
| nm 2 |
| pciinfo 3 |
| pinit 4 |
| printenv 8 |
| protect 4 |
| rarpboot 4 |
| rdump 5 |
| reginfo 3 |
| reset 5 |
| run 3 |
| saveenv 4 |
| sccinfo 3 |
| scsiboot 5 |
| scsi 4 |
| siiinfo 3 |
| sitinfo 3 |
| siuinfo 3 |
| setdcr 6 # IBM 4XX DCR registers |
| setenv 6 |
| smcinfo 3 |
| spiinfo 3 |
| sspi 4 |
| stack 5 |
| step 4 |
| tftpboot 4 |
| usbboot 5 |
| usb 4 |
| version 4 |
| ? 1 |