| if STM32MP15x |
| |
| config STM32MP15x_STM32IMAGE |
| bool "Support STM32 image for generated U-Boot image" |
| depends on TFABOOT |
| help |
| Support of STM32 image generation for SOC STM32MP15x |
| for TF-A boot when FIP container is not used |
| |
| choice |
| prompt "STM32MP15x board select" |
| optional |
| |
| config TARGET_ST_STM32MP15x |
| bool "STMicroelectronics STM32MP15x boards" |
| imply BOOTSTAGE |
| imply CMD_BOOTSTAGE |
| imply CMD_CLS if CMD_BMP |
| imply DISABLE_CONSOLE |
| imply PRE_CONSOLE_BUFFER |
| imply SILENT_CONSOLE |
| help |
| target the STMicroelectronics board with SOC STM32MP15x |
| managed by board/st/stm32mp1: |
| Evalulation board (EV1) or Discovery board (DK1 and DK2). |
| The difference between board are managed with devicetree |
| |
| config TARGET_DH_STM32MP1_PDK2 |
| bool "DH STM32MP1 PDK2" |
| help |
| Target the DH PDK2 development kit with STM32MP15x SoM. |
| |
| config TARGET_MICROGEA_STM32MP1 |
| bool "Engicam MicroGEA STM32MP1 SOM" |
| imply BOOTSTAGE |
| imply CMD_BOOTSTAGE |
| imply CMD_CLS if CMD_BMP |
| imply DISABLE_CONSOLE |
| imply PRE_CONSOLE_BUFFER |
| imply SILENT_CONSOLE |
| help |
| MicroGEA STM32MP1 is a STM32MP157A based Micro SOM. |
| |
| MicroGEA STM32MP1 MicroDev 2.0: |
| * MicroDev 2.0 is a general purpose miniature carrier board with CAN, |
| LTE and LVDS panel interfaces. |
| * MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board |
| for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board. |
| |
| MicroGEA STM32MP1 MicroDev 2.0 7" OF: |
| * 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS |
| panel and toucscreen. |
| * MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with |
| pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" |
| Open Frame Solution board. |
| |
| config TARGET_ICORE_STM32MP1 |
| bool "Engicam i.Core STM32MP1 SOM" |
| imply BOOTSTAGE |
| imply CMD_BOOTSTAGE |
| imply CMD_CLS if CMD_BMP |
| imply DISABLE_CONSOLE |
| imply PRE_CONSOLE_BUFFER |
| imply SILENT_CONSOLE |
| help |
| i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A. |
| |
| i.Core STM32MP1 EDIMM2.2: |
| * EDIMM2.2 is a Form Factor Capacitive Evaluation Board. |
| * i.Core STM32MP1 needs to mount on top of EDIMM2.2 for |
| creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit. |
| |
| i.Core STM32MP1 C.TOUCH 2.0 |
| * C.TOUCH 2.0 is a general purpose Carrier board. |
| * i.Core STM32MP1 needs to mount on top of this Carrier board |
| for creating complete i.Core STM32MP1 C.TOUCH 2.0 board. |
| |
| endchoice |
| |
| config STM32MP15_PWR |
| bool "Enable driver for STM32MP15x PWR" |
| depends on DM_REGULATOR && DM_PMIC |
| default y |
| help |
| This config enables implementation of driver-model pmic and |
| regulator uclass features for access to STM32MP15x PWR. |
| |
| config SPL_STM32MP15_PWR |
| bool "Enable driver for STM32MP15x PWR in SPL" |
| depends on SPL && SPL_DM_REGULATOR && SPL_DM_PMIC |
| default y |
| help |
| This config enables implementation of driver-model pmic and |
| regulator uclass features for access to STM32MP15x PWR in SPL. |
| |
| config SYS_TEXT_BASE |
| default 0xC0100000 |
| |
| config PRE_CON_BUF_ADDR |
| default 0xC02FF000 |
| |
| config PRE_CON_BUF_SZ |
| default 4096 |
| |
| config BOOTSTAGE_STASH_ADDR |
| default 0xC3000000 |
| |
| if BOOTCOUNT_GENERIC |
| config SYS_BOOTCOUNT_SINGLEWORD |
| default y |
| |
| # TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21) |
| config SYS_BOOTCOUNT_ADDR |
| default 0x5C00A154 |
| endif |
| |
| if DEBUG_UART |
| |
| config DEBUG_UART_BOARD_INIT |
| default y |
| |
| # debug on UART4 by default |
| config DEBUG_UART_BASE |
| default 0x40010000 |
| |
| # clock source is HSI on reset |
| config DEBUG_UART_CLOCK |
| default 64000000 |
| endif |
| |
| source "board/st/stm32mp1/Kconfig" |
| source "board/dhelectronics/dh_stm32mp1/Kconfig" |
| source "board/engicam/stm32mp1/Kconfig" |
| |
| endif |