| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2019 Google LLC |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #ifndef __p2sb_h |
| #define __p2sb_h |
| |
| /* Port Id lives in bits 23:16 and register offset lives in 15:0 of address */ |
| #define PCR_PORTID_SHIFT 16 |
| |
| #if !defined(__ACPI__) |
| |
| /* These registers contain IOAPIC and HPET devfn */ |
| #define PCH_P2SB_IBDF 0x6c |
| #define PCH_P2SB_HBDF 0x70 |
| |
| /** |
| * struct p2sb_child_platdata - Information about each child of a p2sb device |
| * |
| * @pid: Port ID for this child |
| */ |
| struct p2sb_child_platdata { |
| uint pid; |
| }; |
| |
| /** |
| * struct p2sb_uc_priv - information for the uclass about each device |
| * |
| * This must be set up by the driver when it is probed |
| * |
| * @mmio_base: Base address of P2SB region |
| */ |
| struct p2sb_uc_priv { |
| uint mmio_base; |
| }; |
| |
| /** |
| * struct p2sb_ops - Operations for the P2SB |
| */ |
| struct p2sb_ops { |
| /** |
| * set_hide() - Set/clear the 'hide' bit on the p2sb |
| * |
| * This device can be hidden from the PCI bus if needed. This method |
| * can be called before the p2sb is probed. |
| * |
| * @dev: P2SB device |
| * @hide: true to hide the device, false to show it |
| * @return 0 if OK, -ve on error |
| */ |
| int (*set_hide)(struct udevice *dev, bool hide); |
| }; |
| |
| #define p2sb_get_ops(dev) ((struct p2sb_ops *)(dev)->driver->ops) |
| |
| /** |
| * p2sb_set_hide() - Set/clear the 'hide' bit on the p2sb |
| * |
| * This device can be hidden from the PCI bus if needed. This method |
| * can be called before the p2sb is probed. |
| * |
| * @dev: P2SB device |
| * @hide: true to hide the device, false to show it |
| * @return 0 if OK, -ve on error |
| */ |
| int p2sb_set_hide(struct udevice *dev, bool hide); |
| |
| /** |
| * pcr_read32/16/8() - Read from a PCR device |
| * |
| * Reads data from a PCR device within the P2SB |
| * |
| * @dev: Device to read from |
| * @offset: Offset within device to read |
| * @return value read |
| */ |
| uint pcr_read32(struct udevice *dev, uint offset); |
| uint pcr_read16(struct udevice *dev, uint offset); |
| uint pcr_read8(struct udevice *dev, uint offset); |
| |
| /** |
| * pcr_read32/16/8() - Write to a PCR device |
| * |
| * Writes data to a PCR device within the P2SB |
| * |
| * @dev: Device to write to |
| * @offset: Offset within device to write |
| * @data: Data to write |
| */ |
| void pcr_write32(struct udevice *dev, uint offset, uint data); |
| void pcr_write16(struct udevice *dev, uint offset, uint data); |
| void pcr_write8(struct udevice *dev, uint offset, uint data); |
| |
| /** |
| * pcr_clrsetbits32/16/8() - Update a PCR device |
| * |
| * Updates dat in a PCR device within the P2SB |
| * |
| * This reads from the device, clears and set bits, then writes back. |
| * |
| * new_data = (old_data & ~clr) | set |
| * |
| * @dev: Device to update |
| * @offset: Offset within device to update |
| * @clr: Bits to clear after reading |
| * @set: Bits to set before writing |
| */ |
| void pcr_clrsetbits32(struct udevice *dev, uint offset, uint clr, uint set); |
| void pcr_clrsetbits16(struct udevice *dev, uint offset, uint clr, uint set); |
| void pcr_clrsetbits8(struct udevice *dev, uint offset, uint clr, uint set); |
| |
| static inline void pcr_setbits32(struct udevice *dev, uint offset, uint set) |
| { |
| return pcr_clrsetbits32(dev, offset, 0, set); |
| } |
| |
| static inline void pcr_setbits16(struct udevice *dev, uint offset, uint set) |
| { |
| return pcr_clrsetbits16(dev, offset, 0, set); |
| } |
| |
| static inline void pcr_setbits8(struct udevice *dev, uint offset, uint set) |
| { |
| return pcr_clrsetbits8(dev, offset, 0, set); |
| } |
| |
| static inline void pcr_clrbits32(struct udevice *dev, uint offset, uint clr) |
| { |
| return pcr_clrsetbits32(dev, offset, clr, 0); |
| } |
| |
| static inline void pcr_clrbits16(struct udevice *dev, uint offset, uint clr) |
| { |
| return pcr_clrsetbits16(dev, offset, clr, 0); |
| } |
| |
| static inline void pcr_clrbits8(struct udevice *dev, uint offset, uint clr) |
| { |
| return pcr_clrsetbits8(dev, offset, clr, 0); |
| } |
| |
| /** |
| * p2sb_set_port_id() - Set the port ID for a p2sb child device |
| * |
| * This must be called in a device's bind() method when OF_PLATDATA is used |
| * since the uclass cannot access the device's of-platdata. |
| * |
| * @dev: Child device (whose parent is UCLASS_P2SB) |
| * @portid: Port ID of child device |
| * @return 0 if OK, -ENODEV is the p2sb device could not be found |
| */ |
| int p2sb_set_port_id(struct udevice *dev, int portid); |
| |
| /** |
| * p2sb_get_port_id() - Get the port ID for a p2sb child device |
| * |
| * @dev: Child device (whose parent is UCLASS_P2SB) |
| * @return Port ID of that child |
| */ |
| int p2sb_get_port_id(struct udevice *dev); |
| |
| /** |
| * pcr_reg_address() Convert an offset in p2sb space to an absolute address |
| * |
| * @dev: Child device (whose parent is UCLASS_P2SB) |
| * @offset: Offset within that child's address space |
| * @return pointer to that offset within the child's address space |
| */ |
| void *pcr_reg_address(struct udevice *dev, uint offset); |
| |
| #endif /* !__ACPI__ */ |
| |
| #endif |