| /* |
| * (C) Copyright 2000-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc8xx.h> |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| static ulong flash_get_size(vu_long * addr, flash_info_t * info); |
| static int write_byte(flash_info_t * info, ulong dest, uchar data); |
| static void flash_get_offsets(ulong base, flash_info_t * info); |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long flash_init(void) |
| { |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| volatile memctl8xx_t *memctl = &immap->im_memctl; |
| unsigned long size; |
| int i; |
| |
| /* Init: no FLASHes known */ |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| |
| size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); |
| |
| if (flash_info[0].flash_id == FLASH_UNKNOWN) { |
| printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size, size << 20); |
| } |
| |
| /* Remap FLASH according to real size */ |
| memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); |
| memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK)); |
| |
| /* Re-do sizing to get full correct info */ |
| size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); |
| |
| flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]); |
| |
| /* monitor protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, |
| &flash_info[0]); |
| |
| flash_protect ( FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, |
| &flash_info[0]); |
| |
| #ifdef CONFIG_ENV_ADDR_REDUND |
| flash_protect ( FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR_REDUND, |
| CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1, |
| &flash_info[0]); |
| #endif |
| |
| |
| flash_info[0].size = size; |
| |
| return (size); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| static void flash_get_offsets(ulong base, flash_info_t * info) |
| { |
| int i; |
| |
| /* set up sector start address table */ |
| if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { |
| for (i = 0; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00010000); |
| } |
| } else if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00004000; |
| info->start[2] = base + 0x00006000; |
| info->start[3] = base + 0x00008000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00010000) - 0x00030000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00004000; |
| info->start[i--] = base + info->size - 0x00006000; |
| info->start[i--] = base + info->size - 0x00008000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00010000; |
| } |
| } |
| |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void flash_print_info(flash_info_t * info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_AMD: |
| printf("AMD "); |
| break; |
| case FLASH_MAN_FUJ: |
| printf("FUJITSU "); |
| break; |
| case FLASH_MAN_MX: |
| printf("MXIC "); |
| break; |
| default: |
| printf("Unknown Vendor "); |
| break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AM040: |
| printf("AM29LV040B (4 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM400B: |
| printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM400T: |
| printf("AM29LV400T (4 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM800B: |
| printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM800T: |
| printf("AM29LV800T (8 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM160B: |
| printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM160T: |
| printf("AM29LV160T (16 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM320B: |
| printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM320T: |
| printf("AM29LV320T (32 Mbit, top boot sector)\n"); |
| break; |
| default: |
| printf("Unknown Chip Type\n"); |
| break; |
| } |
| |
| printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); |
| |
| printf(" Sector Start Addresses:"); |
| for (i = 0; i < info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf("\n "); |
| printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " "); |
| } |
| printf("\n"); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| |
| static ulong flash_get_size(vu_long * addr, flash_info_t * info) |
| { |
| short i; |
| uchar mid; |
| uchar pid; |
| vu_char *caddr = (vu_char *) addr; |
| ulong base = (ulong) addr; |
| |
| |
| /* Write auto select command: read Manufacturer ID */ |
| caddr[0x0555] = 0xAA; |
| caddr[0x02AA] = 0x55; |
| caddr[0x0555] = 0x90; |
| |
| mid = caddr[0]; |
| switch (mid) { |
| case (AMD_MANUFACT & 0xFF): |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| case (FUJ_MANUFACT & 0xFF): |
| info->flash_id = FLASH_MAN_FUJ; |
| break; |
| case (MX_MANUFACT & 0xFF): |
| info->flash_id = FLASH_MAN_MX; |
| break; |
| case (STM_MANUFACT & 0xFF): |
| info->flash_id = FLASH_MAN_STM; |
| break; |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| pid = caddr[1]; /* device ID */ |
| switch (pid) { |
| case (AMD_ID_LV400T & 0xFF): |
| info->flash_id += FLASH_AM400T; |
| info->sector_count = 11; |
| info->size = 0x00080000; |
| break; /* => 512 kB */ |
| |
| case (AMD_ID_LV400B & 0xFF): |
| info->flash_id += FLASH_AM400B; |
| info->sector_count = 11; |
| info->size = 0x00080000; |
| break; /* => 512 kB */ |
| |
| case (AMD_ID_LV800T & 0xFF): |
| info->flash_id += FLASH_AM800T; |
| info->sector_count = 19; |
| info->size = 0x00100000; |
| break; /* => 1 MB */ |
| |
| case (AMD_ID_LV800B & 0xFF): |
| info->flash_id += FLASH_AM800B; |
| info->sector_count = 19; |
| info->size = 0x00100000; |
| break; /* => 1 MB */ |
| |
| case (AMD_ID_LV160T & 0xFF): |
| info->flash_id += FLASH_AM160T; |
| info->sector_count = 35; |
| info->size = 0x00200000; |
| break; /* => 2 MB */ |
| |
| case (AMD_ID_LV160B & 0xFF): |
| info->flash_id += FLASH_AM160B; |
| info->sector_count = 35; |
| info->size = 0x00200000; |
| break; /* => 2 MB */ |
| |
| case (AMD_ID_LV040B & 0xFF): |
| info->flash_id += FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x00080000; |
| break; |
| |
| case (STM_ID_M29W040B & 0xFF): |
| info->flash_id += FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x00080000; |
| break; |
| |
| #if 0 /* enable when device IDs are available */ |
| case (AMD_ID_LV320T & 0xFF): |
| info->flash_id += FLASH_AM320T; |
| info->sector_count = 67; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| |
| case (AMD_ID_LV320B & 0xFF): |
| info->flash_id += FLASH_AM320B; |
| info->sector_count = 67; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| #endif |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| return (0); /* => no or unknown flash */ |
| |
| } |
| |
| printf(" "); |
| /* set up sector start address table */ |
| if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { |
| for (i = 0; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00010000); |
| } |
| } else if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00004000; |
| info->start[2] = base + 0x00006000; |
| info->start[3] = base + 0x00008000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00010000) - 0x00030000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00004000; |
| info->start[i--] = base + info->size - 0x00006000; |
| info->start[i--] = base + info->size - 0x00008000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00010000; |
| } |
| } |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) { |
| /* read sector protection: D0 = 1 if protected */ |
| caddr = (volatile unsigned char *)(info->start[i]); |
| info->protect[i] = caddr[2] & 1; |
| } |
| |
| /* |
| * Prevent writes to uninitialized FLASH. |
| */ |
| if (info->flash_id != FLASH_UNKNOWN) { |
| caddr = (vu_char *) info->start[0]; |
| |
| caddr[0x0555] = 0xAA; |
| caddr[0x02AA] = 0x55; |
| caddr[0x0555] = 0xF0; |
| |
| udelay(20000); |
| } |
| |
| return (info->size); |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| int flash_erase(flash_info_t * info, int s_first, int s_last) |
| { |
| vu_char *addr = (vu_char *) (info->start[0]); |
| int flag, prot, sect, l_sect; |
| ulong start, now, last; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf("- missing\n"); |
| } else { |
| printf("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| if ((info->flash_id == FLASH_UNKNOWN) || |
| (info->flash_id > FLASH_AMD_COMP)) { |
| printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect = s_first; sect <= s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf("- Warning: %d protected sectors will not be erased!\n", prot); |
| } else { |
| printf("\n"); |
| } |
| |
| l_sect = -1; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr[0x0555] = 0xAA; |
| addr[0x02AA] = 0x55; |
| addr[0x0555] = 0x80; |
| addr[0x0555] = 0xAA; |
| addr[0x02AA] = 0x55; |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| addr = (vu_char *) (info->start[sect]); |
| addr[0] = 0x30; |
| l_sect = sect; |
| } |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay(1000); |
| |
| /* |
| * We wait for the last triggered sector |
| */ |
| if (l_sect < 0) |
| goto DONE; |
| |
| start = get_timer(0); |
| last = start; |
| addr = (vu_char *) (info->start[l_sect]); |
| while ((addr[0] & 0x80) != 0x80) { |
| if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf("Timeout\n"); |
| return 1; |
| } |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc('.'); |
| last = now; |
| } |
| } |
| |
| DONE: |
| /* reset to read mode */ |
| addr = (vu_char *) info->start[0]; |
| addr[0] = 0xF0; /* reset bank */ |
| |
| printf(" done\n"); |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| |
| int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
| { |
| int rc; |
| |
| while (cnt > 0) { |
| if ((rc = write_byte(info, addr++, *src++)) != 0) { |
| return (rc); |
| } |
| --cnt; |
| } |
| |
| return (0); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int write_byte(flash_info_t * info, ulong dest, uchar data) |
| { |
| vu_char *addr = (vu_char *) (info->start[0]); |
| ulong start; |
| int flag; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*((vu_char *) dest) & data) != data) { |
| return (2); |
| } |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr[0x0555] = 0xAA; |
| addr[0x02AA] = 0x55; |
| addr[0x0555] = 0xA0; |
| |
| *((vu_char *) dest) = data; |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* data polling for D7 */ |
| start = get_timer(0); |
| while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) { |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
| return (1); |
| } |
| } |
| return (0); |
| } |