blob: d3e22d9018df80d9ba7726627489f173bb536434 [file] [log] [blame]
/*
* Voipac PXA270 configuration file
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Voipac PXA270 board */
#undef BOARD_LATE_INIT
#undef CONFIG_SKIP_RELOCATE_UBOOT
#undef CONFIG_USE_IRQ
#undef CONFIG_SKIP_LOWLEVEL_INIT
/*
* Environment settings
*/
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE 128
#define CONFIG_ENV_OVERWRITE /* override default environment */
#define CONFIG_BOOTCOMMAND \
"if mmc init && fatload mmc 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"if usb reset && fatload usb 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"bootm 0x40000;"
#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_NET
#define CONFIG_CMD_ENV
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB
#undef CONFIG_LCD
#define CONFIG_CMD_IDE
#ifdef CONFIG_ONENAND_U_BOOT
#undef CONFIG_CMD_FLASH
#define CONFIG_CMD_ONENAND
#else
#define CONFIG_CMD_FLASH
#undef CONFIG_CMD_ONENAND
#endif
/*
* Networking Configuration
* chip on the Voipac PXA270 board
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */
#define DM9000_IO (CONFIG_DM9000_BASE)
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#endif
/*
* MMC Card Configuration
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_PXA_MMC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif
/*
* KGDB
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
#else
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#endif
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_DEVICE_NULLDEV 1
/*
* Clock Configuration
*/
#undef CONFIG_SYS_CLKS_IN_HZ
#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*
* DRAM Map
*/
#define CONFIG_NR_DRAM_BANKS 2 /* We have 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR (0x5c000000)
/*
* NOR FLASH
*/
#if defined(CONFIG_CMD_FLASH) /* NOR */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_ENV_IS_IN_FLASH 1
#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_ONENAND_BASE 0x00000000
#define CONFIG_ENV_IS_IN_ONENAND 1
#else /* No flash */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_ENV_IS_NOWHERE
#endif
#define CONFIG_SYS_MONITOR_BASE 0x000000
#define CONFIG_SYS_MONITOR_LEN 0x40000
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SECT_SIZE 0x40000
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
/*
* IDE
*/
#ifdef CONFIG_CMD_IDE
#define CONFIG_LBA48
#undef CONFIG_IDE_LED
#undef CONFIG_IDE_RESET
#define __io
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 1
#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0
#define CONFIG_SYS_ATA_DATA_OFFSET 0x120
#define CONFIG_SYS_ATA_REG_OFFSET 0x120
#define CONFIG_SYS_ATA_ALT_OFFSET 0x120
#define CONFIG_SYS_ATA_STRIDE 2
#endif
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x01308800
#define CONFIG_SYS_GPSR1_VAL 0x00cf0000
#define CONFIG_SYS_GPSR2_VAL 0x922ac000
#define CONFIG_SYS_GPSR3_VAL 0x0161e800
#define CONFIG_SYS_GPCR0_VAL 0x00010000
#define CONFIG_SYS_GPCR1_VAL 0x0
#define CONFIG_SYS_GPCR2_VAL 0x0
#define CONFIG_SYS_GPCR3_VAL 0x0
#define CONFIG_SYS_GPDR0_VAL 0xcbb18800
#define CONFIG_SYS_GPDR1_VAL 0xfccfa981
#define CONFIG_SYS_GPDR2_VAL 0x922affff
#define CONFIG_SYS_GPDR3_VAL 0x0161e904
#define CONFIG_SYS_GAFR0_L_VAL 0x00100000
#define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510
#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x4109a401
#define CONFIG_SYS_GAFR3_L_VAL 0x54010310
#define CONFIG_SYS_GAFR3_U_VAL 0x00025401
#define CONFIG_SYS_PSSR_VAL 0x30
/*
* Clock settings
*/
#define CONFIG_SYS_CKEN 0x00500240
#define CONFIG_SYS_CCCR 0x02000290
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x3ffc95fa
#define CONFIG_SYS_MSC1_VAL 0x02ccf974
#define CONFIG_SYS_MSC2_VAL 0x00000000
#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3
#define CONFIG_SYS_MDREFR_VAL 0x201fe01e
#define CONFIG_SYS_MDMRS_VAL 0x00000000
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
#define CONFIG_SYS_MEM_BUF_IMP 0x0f
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000001
#define CONFIG_SYS_MCMEM0_VAL 0x00014307
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
#define CONFIG_SYS_MCATT0_VAL 0x0001c787
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
#define CONFIG_SYS_MCIO0_VAL 0x0001430f
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
/*
* LCD
*/
#ifdef CONFIG_LCD
#define CONFIG_VOIPAC_LCD
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_BOARD_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270"
#define CONFIG_USB_STORAGE
#endif
#endif /* __CONFIG_H */