include/configs/am335x_shc.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2016
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * Based on:
  * am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_AM335X_SHC_H
 #define __CONFIG_AM335X_SHC_H

 #include <configs/ti_am335x_common.h>

 /* settings we don;t want on this board */
 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 #undef CONFIG_CMD_EXT4
 #undef CONFIG_CMD_EXT4_WRITE
 #undef CONFIG_CMD_MMC_SPI
 #undef CONFIG_CMD_SPI
 #undef CONFIG_CMD_PXE

 #define CONFIG_CMD_CACHE

 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_TIMESTAMP
 # define CONFIG_LZO
 #endif

 #define CONFIG_SYS_BOOTM_LEN		(16 << 20)

 #define MACH_TYPE_BOSCH_SHC_B		9001
 #define MACH_TYPE_BOSCH_SHC_B2		9002
 #define MACH_TYPE_BOSCH_SHC_C		9003
 #define MACH_TYPE_BOSCH_SHC_C2		9004
 #define MACH_TYPE_BOSCH_SHC_C3		9005
 #define MACH_TYPE_BOSCH_SHC		9006
 #ifdef CONFIG_B_SAMPLE
 # define CONFIG_MACH_TYPE		MACH_TYPE_BOSCH_SHC_B
 #elif defined CONFIG_B2_SAMPLE
 # define CONFIG_MACH_TYPE		MACH_TYPE_BOSCH_SHC_B2
 #elif defined CONFIG_C_SAMPLE
 # define CONFIG_MACH_TYPE		MACH_TYPE_BOSCH_SHC_C
 #elif defined CONFIG_C2_SAMPLE
 # define CONFIG_MACH_TYPE		MACH_TYPE_BOSCH_SHC_C2
 #elif defined CONFIG_C3_SAMPLE
 # define CONFIG_MACH_TYPE		MACH_TYPE_BOSCH_SHC_C3
 #elif defined CONFIG_SERIES
 # define CONFIG_MACH_TYPE		MACH_TYPE_BOSCH_SHC
 #endif /* #ifdef CONFIG_B_SAMPLE */

 #define CONFIG_BOARD_LATE_INIT

 /* Clock Defines */
 #define V_OSCK				24000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)

 #define CONFIG_ENV_IS_IN_MMC		1

 /*
  * in case of SD Card or Network boot we want to have a possibility to
  * debrick the shc, therefore do not read environment from eMMC
  */
 #if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #else
 #define CONFIG_SYS_MMC_ENV_DEV		1
 #endif

 /*
  * Info when using boot partitions: As environment resides within first
  * 128 kB, MLO must start at 128 kB == 0x20000
  * ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1,
  * 4..7=general0..3
  */
 #define CONFIG_ENV_SIZE				0x1000 /* 4 KB */
 #define CONFIG_ENV_OFFSET			0x7000 /* 28 kB */

 #define CONFIG_HSMMC2_8BIT

 #define CONFIG_ENV_OFFSET_REDUND    0x9000 /* 36 kB */
 #define CONFIG_ENV_SIZE_REDUND      CONFIG_ENV_SIZE

 /* Enhance our eMMC support / experience. */
 #define CONFIG_CMD_GPT
 #define CONFIG_EFI_PARTITION
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_ISO_PARTITION
 #endif
 #ifndef CONFIG_SHC_ICT
 /*
  * In builds other than ICT, reset to retry after timeout
  * Define a timeout after which a stopped bootloader continues autoboot
  * (only works with CONFIG_RESET_TO_RETRY)
  */
 # define CONFIG_BOOT_RETRY_TIME 30
 # define CONFIG_RESET_TO_RETRY
 #endif

 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
 	"kloadaddr=0x84000000\0" \
 	"fdtaddr=0x85000000\0" \
 	"fdt_high=0xffffffff\0" \
 	"rdaddr=0x81000000\0" \
 	"bootfile=uImage\0" \
 	"fdtfile=am335x-shc.dtb\0" \
 	"verify=no\0" \
 	"serverip=10.55.152.184\0" \
 	"rootpath=/srv/nfs/shc-rootfs\0" \
 	"console=ttyO0,115200n8\0" \
 	"optargs=quiet\0" \
 	"mmcdev=1\0" \
 	"harakiri=0\0" \
 	"mmcpart=2\0" \
 	"active_root=root1\0" \
 	"inactive_root=root2\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
 	"nfsopts=nolock\0" \
 	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
 		"::off\0" \
 	"ip_method=none\0" \
 	"bootargs_defaults=setenv bootargs " \
 		"console=${console} " \
 		"${optargs}\0" \
 	"mmcargs=run bootargs_defaults;" \
 		"setenv bootargs ${bootargs} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype} ip=${ip_method}\0" \
 	"netargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"root=/dev/nfs " \
 		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
 		"ip=dhcp\0" \
 	"bootenv=uEnv.txt\0" \
 	"loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \
 			"echo Loaded environment from ${bootenv}; " \
 			"run importbootenv; " \
 		"fi;\0" \
 	"importbootenv=echo Importing environment variables from uEnv.txt ...; " \
 		"env import -t $loadaddr $filesize\0" \
 	"loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \
 	"loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \
 	"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \
 	"netloaduimage=tftp ${loadaddr} ${bootfile}\0" \
 	"netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \
 	"mmcboot=echo Booting Linux from ${mmcdevice} ...; " \
 		"run mmcargs; " \
 		"if run loadfdt; then " \
 			"echo device tree detected; " \
 			"bootm ${kloadaddr} - ${fdtaddr}; " \
 		"else " \
 			"bootm ${kloadaddr}; " \
 		"fi; \0" \
 	"netboot=echo Booting from network ...; " \
 		"setenv autoload no; " \
 		"dhcp; " \
 		"run netloaduimage; " \
 		"run netargs; " \
 		"echo NFS path: ${serverip}:${rootpath};" \
 		"if run netloadfdt; then " \
 			"echo device tree detected; " \
 			"bootm ${loadaddr} - ${fdtaddr}; " \
 		"else " \
 			"bootm ${loadaddr}; " \
 		"fi; \0" \
 	"emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \
 	"mmcpart_gp=mmcpart gp 1 40; \0" \
 	"mmcpart_enhance=mmcpart enhance 0 64; \0" \
 	"mmcpart_rel_write=mmcpart rel_write 1f; \0" \
 	"mmcpart_commit=mmcpart commit 1; \0" \
 	"mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \
 	"led_success=gpio set 22; \0" \
 	"fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \
 	"uenv_exec=if test -n $uenvcmd; then " \
 			"echo Running uenvcmd ...; " \
 			"run uenvcmd; " \
 		"fi;\0" \
 	"sd_setup=echo SD/MMC-Card detected on device 0; " \
 		"setenv mmcdevice SD; " \
 		"setenv mmcdev 0; " \
 		"setenv mmcpart 2; " \
 		"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \
 	"emmc_setup=echo eMMC detected on device 1; " \
 		"setenv mmcdevice eMMC; " \
 		"setenv mmcdev 1; " \
 		"run emmc_erase; " \
 		"if test ${active_root} = root2; then " \
 			"echo Active root is partition 6 (root2); " \
 			"setenv mmcpart 6; " \
 		"else " \
 			"echo Active root is partition 5 (root1); " \
 			"setenv mmcpart 5; " \
 		"fi; " \
 		"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0"
 #endif /* #ifndef CONFIG_SPL_BUILD */

 #if defined CONFIG_SHC_NETBOOT
 /* Network Boot */
 # define CONFIG_BOOTCOMMAND \
 	"run fusecmd; " \
 	"if run netboot; then " \
 		"echo Booting from network; " \
 	"else " \
 		"echo ERROR: Cannot boot from network!; " \
 		"panic; " \
 	"fi; "

 #elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
 /* SD-Card Boot */
 # define CONFIG_BOOTCOMMAND \
 	"if mmc dev 0; mmc rescan; then " \
 		"run sd_setup; " \
 	"else " \
 		"echo ERROR: SD/MMC-Card not detected!; " \
 		"panic; " \
 	"fi; " \
 	"if run loaduimage; then " \
 		"echo Bootable SD/MMC-Card inserted, booting from it!; " \
 		"run mmcboot; " \
 	"else " \
 		"echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
 		"panic; " \
 	"fi; "

 #elif defined CONFIG_SHC_ICT
 /* ICT adapter boots only u-boot and does HW partitioning */
 # define CONFIG_BOOTCOMMAND \
 	"if mmc dev 0; mmc rescan; then " \
 		"run sd_setup; " \
 	"else " \
 		"echo ERROR: SD/MMC-Card not detected!; " \
 		"panic; " \
 	"fi; " \
 	"run fusecmd; "

 #else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
 /* Regular Boot from internal eMMC */
 # define CONFIG_BOOTCOMMAND \
 	"if mmc dev 1; mmc rescan; then " \
 		"run emmc_setup; " \
 	"else " \
 		"echo ERROR: eMMC device not detected!; " \
 		"panic; " \
 	"fi; " \
 	"if run loaduimage; then " \
 		"run mmcboot; " \
 	"else " \
 		"echo ERROR Unable to load uImage from eMMC!; " \
 		"echo Performing Rollback!; " \
 		"setenv _active_ ${active_root}; " \
 		"setenv _inactive_ ${inactive_root}; " \
 		"setenv active_root ${_inactive_}; " \
 		"setenv inactive_root ${_active_}; " \
 		"saveenv; " \
 		"reset; " \
 	"fi; "

 #endif /* Regular Boot */

 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
 #define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
 #define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
 #define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
 #define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_CONS_INDEX               1

 /* PMIC support */
 #define CONFIG_POWER_TPS65217

 /* SPL */

 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"

 #ifndef CONFIG_SPL_USBETH_SUPPORT
 /* To support eMMC booting */
 #define CONFIG_STORAGE_EMMC
 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
 #endif

 /*
  * Disable MMC DM for SPL build and can be re-enabled after adding
  * DM support in SPL
  */
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_DM_MMC
 #undef CONFIG_TIMER
 #endif

 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 #define CONFIG_DRIVER_TI_CPSW
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
 #define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC

 /* I2C configuration */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #define CONFIG_SYS_I2C_SPEED		400000
 #define CONFIG_SYS_I2C_SLAVE		1

 #define CONFIG_SHOW_BOOT_PROGRESS

 #if defined CONFIG_SHC_NETBOOT
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_ENV_IS_NOWHERE
 #undef CONFIG_ENV_IS_IN_MMC
 #endif
 #endif
 #endif	/* ! __CONFIG_AM335X_SHC_H */
	/*
	* (C) Copyright 2016
	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* Based on:
	* am335x_evm.h
	*
	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_AM335X_SHC_H
	#define __CONFIG_AM335X_SHC_H

	#include <configs/ti_am335x_common.h>

	/* settings we don;t want on this board */
	#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
	#undef CONFIG_CMD_EXT4
	#undef CONFIG_CMD_EXT4_WRITE
	#undef CONFIG_CMD_MMC_SPI
	#undef CONFIG_CMD_SPI
	#undef CONFIG_CMD_PXE

	#define CONFIG_CMD_CACHE

	#ifndef CONFIG_SPL_BUILD
	# define CONFIG_TIMESTAMP
	# define CONFIG_LZO
	#endif

	#define CONFIG_SYS_BOOTM_LEN (16 << 20)

	#define MACH_TYPE_BOSCH_SHC_B 9001
	#define MACH_TYPE_BOSCH_SHC_B2 9002
	#define MACH_TYPE_BOSCH_SHC_C 9003
	#define MACH_TYPE_BOSCH_SHC_C2 9004
	#define MACH_TYPE_BOSCH_SHC_C3 9005
	#define MACH_TYPE_BOSCH_SHC 9006
	#ifdef CONFIG_B_SAMPLE
	# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_B
	#elif defined CONFIG_B2_SAMPLE
	# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_B2
	#elif defined CONFIG_C_SAMPLE
	# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C
	#elif defined CONFIG_C2_SAMPLE
	# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C2
	#elif defined CONFIG_C3_SAMPLE
	# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C3
	#elif defined CONFIG_SERIES
	# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC
	#endif /* #ifdef CONFIG_B_SAMPLE */

	#define CONFIG_BOARD_LATE_INIT

	/* Clock Defines */
	#define V_OSCK 24000000 /* Clock output from T2 */
	#define V_SCLK (V_OSCK)

	#define CONFIG_ENV_IS_IN_MMC 1

	/*
	* in case of SD Card or Network boot we want to have a possibility to
	* debrick the shc, therefore do not read environment from eMMC
	*/
	#if defined(CONFIG_SHC_SDBOOT) \|\| defined(CONFIG_SHC_NETBOOT)
	#define CONFIG_SYS_MMC_ENV_DEV 0
	#else
	#define CONFIG_SYS_MMC_ENV_DEV 1
	#endif

	/*
	* Info when using boot partitions: As environment resides within first
	* 128 kB, MLO must start at 128 kB == 0x20000
	* ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1,
	* 4..7=general0..3
	*/
	#define CONFIG_ENV_SIZE 0x1000 /* 4 KB */
	#define CONFIG_ENV_OFFSET 0x7000 /* 28 kB */

	#define CONFIG_HSMMC2_8BIT

	#define CONFIG_ENV_OFFSET_REDUND 0x9000 /* 36 kB */
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE

	/* Enhance our eMMC support / experience. */
	#define CONFIG_CMD_GPT
	#define CONFIG_EFI_PARTITION
	#ifdef CONFIG_SPL_BUILD
	#undef CONFIG_ISO_PARTITION
	#endif
	#ifndef CONFIG_SHC_ICT
	/*
	* In builds other than ICT, reset to retry after timeout
	* Define a timeout after which a stopped bootloader continues autoboot
	* (only works with CONFIG_RESET_TO_RETRY)
	*/
	# define CONFIG_BOOT_RETRY_TIME 30
	# define CONFIG_RESET_TO_RETRY
	#endif

	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

	#ifndef CONFIG_SPL_BUILD
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x80200000\0" \
	"kloadaddr=0x84000000\0" \
	"fdtaddr=0x85000000\0" \
	"fdt_high=0xffffffff\0" \
	"rdaddr=0x81000000\0" \
	"bootfile=uImage\0" \
	"fdtfile=am335x-shc.dtb\0" \
	"verify=no\0" \
	"serverip=10.55.152.184\0" \
	"rootpath=/srv/nfs/shc-rootfs\0" \
	"console=ttyO0,115200n8\0" \
	"optargs=quiet\0" \
	"mmcdev=1\0" \
	"harakiri=0\0" \
	"mmcpart=2\0" \
	"active_root=root1\0" \
	"inactive_root=root2\0" \
	"mmcrootfstype=ext4 rootwait\0" \
	"nfsopts=nolock\0" \
	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
	"::off\0" \
	"ip_method=none\0" \
	"bootargs_defaults=setenv bootargs " \
	"console=${console} " \
	"${optargs}\0" \
	"mmcargs=run bootargs_defaults;" \
	"setenv bootargs ${bootargs} " \
	"root=${mmcroot} " \
	"rootfstype=${mmcrootfstype} ip=${ip_method}\0" \
	"netargs=setenv bootargs console=${console} " \
	"${optargs} " \
	"root=/dev/nfs " \
	"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
	"ip=dhcp\0" \
	"bootenv=uEnv.txt\0" \
	"loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \
	"echo Loaded environment from ${bootenv}; " \
	"run importbootenv; " \
	"fi;\0" \
	"importbootenv=echo Importing environment variables from uEnv.txt ...; " \
	"env import -t $loadaddr $filesize\0" \
	"loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \
	"loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \
	"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \
	"netloaduimage=tftp ${loadaddr} ${bootfile}\0" \
	"netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \
	"mmcboot=echo Booting Linux from ${mmcdevice} ...; " \
	"run mmcargs; " \
	"if run loadfdt; then " \
	"echo device tree detected; " \
	"bootm ${kloadaddr} - ${fdtaddr}; " \
	"else " \
	"bootm ${kloadaddr}; " \
	"fi; \0" \
	"netboot=echo Booting from network ...; " \
	"setenv autoload no; " \
	"dhcp; " \
	"run netloaduimage; " \
	"run netargs; " \
	"echo NFS path: ${serverip}:${rootpath};" \
	"if run netloadfdt; then " \
	"echo device tree detected; " \
	"bootm ${loadaddr} - ${fdtaddr}; " \
	"else " \
	"bootm ${loadaddr}; " \
	"fi; \0" \
	"emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \
	"mmcpart_gp=mmcpart gp 1 40; \0" \
	"mmcpart_enhance=mmcpart enhance 0 64; \0" \
	"mmcpart_rel_write=mmcpart rel_write 1f; \0" \
	"mmcpart_commit=mmcpart commit 1; \0" \
	"mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \
	"led_success=gpio set 22; \0" \
	"fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \
	"uenv_exec=if test -n $uenvcmd; then " \
	"echo Running uenvcmd ...; " \
	"run uenvcmd; " \
	"fi;\0" \
	"sd_setup=echo SD/MMC-Card detected on device 0; " \
	"setenv mmcdevice SD; " \
	"setenv mmcdev 0; " \
	"setenv mmcpart 2; " \
	"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \
	"emmc_setup=echo eMMC detected on device 1; " \
	"setenv mmcdevice eMMC; " \
	"setenv mmcdev 1; " \
	"run emmc_erase; " \
	"if test ${active_root} = root2; then " \
	"echo Active root is partition 6 (root2); " \
	"setenv mmcpart 6; " \
	"else " \
	"echo Active root is partition 5 (root1); " \
	"setenv mmcpart 5; " \
	"fi; " \
	"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0"
	#endif /* #ifndef CONFIG_SPL_BUILD */

	#if defined CONFIG_SHC_NETBOOT
	/* Network Boot */
	# define CONFIG_BOOTCOMMAND \
	"run fusecmd; " \
	"if run netboot; then " \
	"echo Booting from network; " \
	"else " \
	"echo ERROR: Cannot boot from network!; " \
	"panic; " \
	"fi; "

	#elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
	/* SD-Card Boot */
	# define CONFIG_BOOTCOMMAND \
	"if mmc dev 0; mmc rescan; then " \
	"run sd_setup; " \
	"else " \
	"echo ERROR: SD/MMC-Card not detected!; " \
	"panic; " \
	"fi; " \
	"if run loaduimage; then " \
	"echo Bootable SD/MMC-Card inserted, booting from it!; " \
	"run mmcboot; " \
	"else " \
	"echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
	"panic; " \
	"fi; "

	#elif defined CONFIG_SHC_ICT
	/* ICT adapter boots only u-boot and does HW partitioning */
	# define CONFIG_BOOTCOMMAND \
	"if mmc dev 0; mmc rescan; then " \
	"run sd_setup; " \
	"else " \
	"echo ERROR: SD/MMC-Card not detected!; " \
	"panic; " \
	"fi; " \
	"run fusecmd; "

	#else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
	/* Regular Boot from internal eMMC */
	# define CONFIG_BOOTCOMMAND \
	"if mmc dev 1; mmc rescan; then " \
	"run emmc_setup; " \
	"else " \
	"echo ERROR: eMMC device not detected!; " \
	"panic; " \
	"fi; " \
	"if run loaduimage; then " \
	"run mmcboot; " \
	"else " \
	"echo ERROR Unable to load uImage from eMMC!; " \
	"echo Performing Rollback!; " \
	"setenv _active_ ${active_root}; " \
	"setenv _inactive_ ${inactive_root}; " \
	"setenv active_root ${_inactive_}; " \
	"setenv inactive_root ${_active_}; " \
	"saveenv; " \
	"reset; " \
	"fi; "

	#endif /* Regular Boot */

	/* NS16550 Configuration */
	#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
	#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
	#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
	#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
	#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
	#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_CONS_INDEX 1

	/* PMIC support */
	#define CONFIG_POWER_TPS65217

	/* SPL */

	#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"

	#ifndef CONFIG_SPL_USBETH_SUPPORT
	/* To support eMMC booting */
	#define CONFIG_STORAGE_EMMC
	#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
	#endif

	/*
	* Disable MMC DM for SPL build and can be re-enabled after adding
	* DM support in SPL
	*/
	#ifdef CONFIG_SPL_BUILD
	#undef CONFIG_DM_MMC
	#undef CONFIG_TIMER
	#endif

	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_PING
	#define CONFIG_DRIVER_TI_CPSW
	#define CONFIG_MII
	#define CONFIG_BOOTP_DEFAULT
	#define CONFIG_BOOTP_DNS
	#define CONFIG_BOOTP_DNS2
	#define CONFIG_BOOTP_SEND_HOSTNAME
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_NET_RETRY_COUNT 10
	#define CONFIG_NET_MULTI
	#define CONFIG_PHY_GIGE
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_ADDR 0
	#define CONFIG_PHY_SMSC

	/* I2C configuration */
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	#define CONFIG_SYS_I2C_SPEED 400000
	#define CONFIG_SYS_I2C_SLAVE 1

	#define CONFIG_SHOW_BOOT_PROGRESS

	#if defined CONFIG_SHC_NETBOOT
	#ifdef CONFIG_SPL_BUILD
	#define CONFIG_ENV_IS_NOWHERE
	#undef CONFIG_ENV_IS_IN_MMC
	#endif
	#endif
	#endif /* ! __CONFIG_AM335X_SHC_H */