| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Peng Fan <van.freenix@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <mapmem.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <dm.h> |
| #include <dm/pinctrl.h> |
| |
| #include "pinctrl-imx.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config) |
| { |
| struct imx_pinctrl_priv *priv = dev_get_priv(dev); |
| struct imx_pinctrl_soc_info *info = priv->info; |
| int node = dev_of_offset(config); |
| const struct fdt_property *prop; |
| u32 *pin_data; |
| int npins, size, pin_size; |
| int mux_reg, conf_reg, input_reg, input_val, mux_mode, config_val; |
| u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0; |
| int i, j = 0; |
| |
| dev_dbg(dev, "%s: %s\n", __func__, config->name); |
| |
| if (info->flags & SHARE_MUX_CONF_REG) |
| pin_size = SHARE_FSL_PIN_SIZE; |
| else |
| pin_size = FSL_PIN_SIZE; |
| |
| prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size); |
| if (!prop) { |
| dev_err(dev, "No fsl,pins property in node %s\n", config->name); |
| return -EINVAL; |
| } |
| |
| if (!size || size % pin_size) { |
| dev_err(dev, "Invalid fsl,pins property in node %s\n", |
| config->name); |
| return -EINVAL; |
| } |
| |
| pin_data = devm_kzalloc(dev, size, 0); |
| if (!pin_data) |
| return -ENOMEM; |
| |
| if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins", |
| pin_data, size >> 2)) { |
| dev_err(dev, "Error reading pin data.\n"); |
| devm_kfree(dev, pin_data); |
| return -EINVAL; |
| } |
| |
| npins = size / pin_size; |
| |
| /* |
| * Refer to linux documentation for details: |
| * Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt |
| */ |
| for (i = 0; i < npins; i++) { |
| mux_reg = pin_data[j++]; |
| |
| if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg) |
| mux_reg = -1; |
| |
| if (info->flags & SHARE_MUX_CONF_REG) { |
| conf_reg = mux_reg; |
| } else { |
| conf_reg = pin_data[j++]; |
| if (!(info->flags & ZERO_OFFSET_VALID) && !conf_reg) |
| conf_reg = -1; |
| } |
| |
| if ((mux_reg == -1) || (conf_reg == -1)) { |
| dev_err(dev, "Error mux_reg or conf_reg\n"); |
| devm_kfree(dev, pin_data); |
| return -EINVAL; |
| } |
| |
| input_reg = pin_data[j++]; |
| mux_mode = pin_data[j++]; |
| input_val = pin_data[j++]; |
| config_val = pin_data[j++]; |
| |
| dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, input_reg 0x%x, " |
| "mux_mode 0x%x, input_val 0x%x, config_val 0x%x\n", |
| mux_reg, conf_reg, input_reg, mux_mode, input_val, |
| config_val); |
| |
| if (config_val & IMX_PAD_SION) |
| mux_mode |= IOMUXC_CONFIG_SION; |
| |
| config_val &= ~IMX_PAD_SION; |
| |
| /* Set Mux */ |
| if (info->flags & SHARE_MUX_CONF_REG) { |
| clrsetbits_le32(info->base + mux_reg, info->mux_mask, |
| mux_mode << mux_shift); |
| } else { |
| writel(mux_mode, info->base + mux_reg); |
| } |
| |
| dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n", mux_reg, |
| mux_mode); |
| |
| /* |
| * Set select input |
| * |
| * If the select input value begins with 0xff, it's a quirky |
| * select input and the value should be interpreted as below. |
| * 31 23 15 7 0 |
| * | 0xff | shift | width | select | |
| * It's used to work around the problem that the select |
| * input for some pin is not implemented in the select |
| * input register but in some general purpose register. |
| * We encode the select input value, width and shift of |
| * the bit field into input_val cell of pin function ID |
| * in device tree, and then decode them here for setting |
| * up the select input bits in general purpose register. |
| */ |
| |
| if (input_val >> 24 == 0xff) { |
| u32 val = input_val; |
| u8 select = val & 0xff; |
| u8 width = (val >> 8) & 0xff; |
| u8 shift = (val >> 16) & 0xff; |
| u32 mask = ((1 << width) - 1) << shift; |
| /* |
| * The input_reg[i] here is actually some IOMUXC general |
| * purpose register, not regular select input register. |
| */ |
| val = readl(info->base + input_reg); |
| val &= ~mask; |
| val |= select << shift; |
| writel(val, info->base + input_reg); |
| } else if (input_reg) { |
| /* |
| * Regular select input register can never be at offset |
| * 0, and we only print register value for regular case. |
| */ |
| if (info->input_sel_base) |
| writel(input_val, info->input_sel_base + |
| input_reg); |
| else |
| writel(input_val, info->base + input_reg); |
| |
| dev_dbg(dev, "select_input: offset 0x%x val 0x%x\n", |
| input_reg, input_val); |
| } |
| |
| /* Set config */ |
| if (!(config_val & IMX_NO_PAD_CTL)) { |
| if (info->flags & SHARE_MUX_CONF_REG) { |
| clrsetbits_le32(info->base + conf_reg, |
| ~info->mux_mask, config_val); |
| } else { |
| writel(config_val, info->base + conf_reg); |
| } |
| |
| dev_dbg(dev, "write config: offset 0x%x val 0x%x\n", |
| conf_reg, config_val); |
| } |
| } |
| |
| devm_kfree(dev, pin_data); |
| |
| return 0; |
| } |
| |
| const struct pinctrl_ops imx_pinctrl_ops = { |
| .set_state = imx_pinctrl_set_state, |
| }; |
| |
| int imx_pinctrl_probe(struct udevice *dev, |
| struct imx_pinctrl_soc_info *info) |
| { |
| struct imx_pinctrl_priv *priv = dev_get_priv(dev); |
| int node = dev_of_offset(dev), ret; |
| struct fdtdec_phandle_args arg; |
| fdt_addr_t addr; |
| fdt_size_t size; |
| |
| if (!info) { |
| dev_err(dev, "wrong pinctrl info\n"); |
| return -EINVAL; |
| } |
| |
| priv->dev = dev; |
| priv->info = info; |
| |
| addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg", |
| &size); |
| |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| info->base = map_sysmem(addr, size); |
| if (!info->base) |
| return -ENOMEM; |
| priv->info = info; |
| |
| info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0); |
| /* |
| * Refer to linux documentation for details: |
| * Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt |
| */ |
| if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) { |
| ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, |
| node, "fsl,input-sel", |
| NULL, 0, 0, &arg); |
| if (ret) { |
| dev_err(dev, "iomuxc fsl,input-sel property not found\n"); |
| return -EINVAL; |
| } |
| |
| addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg", |
| &size); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| info->input_sel_base = map_sysmem(addr, size); |
| if (!info->input_sel_base) |
| return -ENOMEM; |
| } |
| |
| dev_dbg(dev, "initialized IMX pinctrl driver\n"); |
| |
| return 0; |
| } |
| |
| int imx_pinctrl_remove(struct udevice *dev) |
| { |
| struct imx_pinctrl_priv *priv = dev_get_priv(dev); |
| struct imx_pinctrl_soc_info *info = priv->info; |
| |
| if (info->input_sel_base) |
| unmap_sysmem(info->input_sel_base); |
| if (info->base) |
| unmap_sysmem(info->base); |
| |
| return 0; |
| } |