| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2019 NXP |
| */ |
| |
| #include <common.h> |
| #include <fdtdec.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <i2c.h> |
| #include <linux/err.h> |
| #include <log.h> |
| #include <asm/global_data.h> |
| #include <asm-generic/gpio.h> |
| #include <linux/printk.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| #include <power/pca9450.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static const struct pmic_child_info pmic_children_info[] = { |
| /* buck */ |
| { .prefix = "b", .driver = PCA9450_REGULATOR_DRIVER}, |
| { .prefix = "B", .driver = PCA9450_REGULATOR_DRIVER}, |
| /* ldo */ |
| { .prefix = "l", .driver = PCA9450_REGULATOR_DRIVER}, |
| { .prefix = "L", .driver = PCA9450_REGULATOR_DRIVER}, |
| { }, |
| }; |
| |
| struct pca9450_priv { |
| struct gpio_desc *sd_vsel_gpio; |
| }; |
| |
| static int pca9450_reg_count(struct udevice *dev) |
| { |
| return PCA9450_REG_NUM; |
| } |
| |
| static int pca9450_write(struct udevice *dev, uint reg, const uint8_t *buff, |
| int len) |
| { |
| if (dm_i2c_write(dev, reg, buff, len)) { |
| pr_err("write error to device: %p register: %#x!", dev, reg); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int pca9450_read(struct udevice *dev, uint reg, uint8_t *buff, |
| int len) |
| { |
| if (dm_i2c_read(dev, reg, buff, len)) { |
| pr_err("read error from device: %p register: %#x!", dev, reg); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int pca9450_bind(struct udevice *dev) |
| { |
| int children; |
| ofnode regulators_node; |
| |
| regulators_node = dev_read_subnode(dev, "regulators"); |
| if (!ofnode_valid(regulators_node)) { |
| debug("%s: %s regulators subnode not found!", __func__, |
| dev->name); |
| return -ENXIO; |
| } |
| |
| debug("%s: '%s' - found regulators subnode\n", __func__, dev->name); |
| |
| children = pmic_bind_children(dev, regulators_node, |
| pmic_children_info); |
| if (!children) |
| debug("%s: %s - no child found\n", __func__, dev->name); |
| |
| /* Always return success for this device */ |
| return 0; |
| } |
| |
| static int pca9450_probe(struct udevice *dev) |
| { |
| struct pca9450_priv *priv = dev_get_priv(dev); |
| unsigned int reset_ctrl; |
| int ret = 0; |
| |
| if (CONFIG_IS_ENABLED(DM_GPIO) && CONFIG_IS_ENABLED(DM_REGULATOR_PCA9450)) { |
| priv->sd_vsel_gpio = devm_gpiod_get_optional(dev, "sd-vsel", |
| GPIOD_IS_OUT | |
| GPIOD_IS_OUT_ACTIVE); |
| if (IS_ERR(priv->sd_vsel_gpio)) { |
| ret = PTR_ERR(priv->sd_vsel_gpio); |
| dev_err(dev, "Failed to request SD_VSEL GPIO: %d\n", ret); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| if (ofnode_read_bool(dev_ofnode(dev), "nxp,wdog_b-warm-reset")) |
| reset_ctrl = PCA9450_PMIC_RESET_WDOG_B_CFG_WARM; |
| else |
| reset_ctrl = PCA9450_PMIC_RESET_WDOG_B_CFG_COLD_LDO12; |
| |
| return pmic_clrsetbits(dev, PCA9450_RESET_CTRL, |
| PCA9450_PMIC_RESET_WDOG_B_CFG_MASK, reset_ctrl); |
| } |
| |
| static struct dm_pmic_ops pca9450_ops = { |
| .reg_count = pca9450_reg_count, |
| .read = pca9450_read, |
| .write = pca9450_write, |
| }; |
| |
| static const struct udevice_id pca9450_ids[] = { |
| { .compatible = "nxp,pca9450a", .data = NXP_CHIP_TYPE_PCA9450A, }, |
| { .compatible = "nxp,pca9450b", .data = NXP_CHIP_TYPE_PCA9450BC, }, |
| { .compatible = "nxp,pca9450c", .data = NXP_CHIP_TYPE_PCA9450BC, }, |
| { .compatible = "nxp,pca9451a", .data = NXP_CHIP_TYPE_PCA9451A, }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(pmic_pca9450) = { |
| .name = "pca9450 pmic", |
| .id = UCLASS_PMIC, |
| .of_match = pca9450_ids, |
| .bind = pca9450_bind, |
| .probe = pca9450_probe, |
| .ops = &pca9450_ops, |
| .priv_auto = sizeof(struct pca9450_priv), |
| }; |