| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* Verify the signature on a PKCS#7 message. |
| * |
| * Imported from crypto/asymmetric_keys/pkcs7_verify.c of linux 5.7 |
| * with modification marked as __UBOOT__. |
| * |
| * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| */ |
| |
| #define pr_fmt(fmt) "PKCS7: "fmt |
| #ifdef __UBOOT__ |
| #include <image.h> |
| #include <string.h> |
| #include <linux/bitops.h> |
| #include <linux/compat.h> |
| #include <linux/asn1.h> |
| #include <linux/printk.h> |
| #include <u-boot/hash-checksum.h> |
| #include <crypto/public_key.h> |
| #include <crypto/pkcs7_parser.h> |
| #else |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/asn1.h> |
| #include <crypto/hash.h> |
| #include <crypto/hash_info.h> |
| #include <crypto/public_key.h> |
| #include "pkcs7_parser.h" |
| #endif |
| |
| /* |
| * pkcs7_digest - Digest the relevant parts of the PKCS#7 data |
| * @pkcs7: PKCS7 Signed Data |
| * @sinfo: PKCS7 Signed Info |
| * |
| * Digest the relevant parts of the PKCS#7 data, @pkcs7, using signature |
| * information in @sinfo. But if there are authentication attributes, |
| * i.e. signed image case, the digest must be calculated against |
| * the authentication attributes. |
| * |
| * Return: 0 - on success, non-zero error code - otherwise |
| */ |
| #ifdef __UBOOT__ |
| static int pkcs7_digest(struct pkcs7_message *pkcs7, |
| struct pkcs7_signed_info *sinfo) |
| { |
| struct public_key_signature *sig = sinfo->sig; |
| struct image_region regions[2]; |
| int ret = 0; |
| |
| /* |
| * [RFC2315 9.3] |
| * If the authenticated attributes are present, |
| * the message-digest is calculated on the |
| * attributes present in the |
| * authenticatedAttributes field and not just |
| * the contents field |
| */ |
| if (!sinfo->authattrs && sig->digest) |
| return 0; |
| |
| if (!sinfo->sig->hash_algo) |
| return -ENOPKG; |
| if (!strcmp(sinfo->sig->hash_algo, "sha256")) |
| sig->digest_size = SHA256_SUM_LEN; |
| else if (!strcmp(sinfo->sig->hash_algo, "sha384")) |
| sig->digest_size = SHA384_SUM_LEN; |
| else if (!strcmp(sinfo->sig->hash_algo, "sha512")) |
| sig->digest_size = SHA512_SUM_LEN; |
| else if (!strcmp(sinfo->sig->hash_algo, "sha1")) |
| sig->digest_size = SHA1_SUM_LEN; |
| else |
| return -ENOPKG; |
| |
| /* |
| * Calculate the hash only if the data is present. |
| * In case of authenticated variable and capsule, |
| * the hash has already been calculated on the |
| * efi_image_regions and populated |
| */ |
| if (pkcs7->data) { |
| sig->digest = calloc(1, sig->digest_size); |
| if (!sig->digest) { |
| pr_warn("Sig %u: Out of memory\n", sinfo->index); |
| return -ENOMEM; |
| } |
| |
| regions[0].data = pkcs7->data; |
| regions[0].size = pkcs7->data_len; |
| |
| /* Digest the message [RFC2315 9.3] */ |
| hash_calculate(sinfo->sig->hash_algo, regions, 1, sig->digest); |
| } |
| |
| /* However, if there are authenticated attributes, there must be a |
| * message digest attribute amongst them which corresponds to the |
| * digest we just calculated. |
| */ |
| if (sinfo->authattrs) { |
| u8 tag; |
| |
| if (!sinfo->msgdigest) { |
| pr_warn("Sig %u: No messageDigest\n", sinfo->index); |
| ret = -EKEYREJECTED; |
| goto error; |
| } |
| |
| if (sinfo->msgdigest_len != sig->digest_size) { |
| pr_debug("Sig %u: Invalid digest size (%u)\n", |
| sinfo->index, sinfo->msgdigest_len); |
| ret = -EBADMSG; |
| goto error; |
| } |
| |
| if (memcmp(sig->digest, sinfo->msgdigest, |
| sinfo->msgdigest_len) != 0) { |
| pr_debug("Sig %u: Message digest doesn't match\n", |
| sinfo->index); |
| ret = -EKEYREJECTED; |
| goto error; |
| } |
| |
| /* We then calculate anew, using the authenticated attributes |
| * as the contents of the digest instead. Note that we need to |
| * convert the attributes from a CONT.0 into a SET before we |
| * hash it. |
| */ |
| memset(sig->digest, 0, sig->digest_size); |
| |
| tag = 0x31; |
| regions[0].data = &tag; |
| regions[0].size = 1; |
| regions[1].data = sinfo->authattrs; |
| regions[1].size = sinfo->authattrs_len; |
| |
| hash_calculate(sinfo->sig->hash_algo, regions, 2, sig->digest); |
| |
| ret = 0; |
| } |
| error: |
| return ret; |
| } |
| #else /* !__UBOOT__ */ |
| static int pkcs7_digest(struct pkcs7_message *pkcs7, |
| struct pkcs7_signed_info *sinfo) |
| { |
| struct public_key_signature *sig = sinfo->sig; |
| struct crypto_shash *tfm; |
| struct shash_desc *desc; |
| size_t desc_size; |
| int ret; |
| |
| kenter(",%u,%s", sinfo->index, sinfo->sig->hash_algo); |
| |
| /* The digest was calculated already. */ |
| if (sig->digest) |
| return 0; |
| |
| if (!sinfo->sig->hash_algo) |
| return -ENOPKG; |
| |
| /* Allocate the hashing algorithm we're going to need and find out how |
| * big the hash operational data will be. |
| */ |
| tfm = crypto_alloc_shash(sinfo->sig->hash_algo, 0, 0); |
| if (IS_ERR(tfm)) |
| return (PTR_ERR(tfm) == -ENOENT) ? -ENOPKG : PTR_ERR(tfm); |
| |
| desc_size = crypto_shash_descsize(tfm) + sizeof(*desc); |
| sig->digest_size = crypto_shash_digestsize(tfm); |
| |
| ret = -ENOMEM; |
| sig->digest = kmalloc(sig->digest_size, GFP_KERNEL); |
| if (!sig->digest) |
| goto error_no_desc; |
| |
| desc = kzalloc(desc_size, GFP_KERNEL); |
| if (!desc) |
| goto error_no_desc; |
| |
| desc->tfm = tfm; |
| |
| /* Digest the message [RFC2315 9.3] */ |
| ret = crypto_shash_digest(desc, pkcs7->data, pkcs7->data_len, |
| sig->digest); |
| if (ret < 0) |
| goto error; |
| pr_devel("MsgDigest = [%*ph]\n", 8, sig->digest); |
| |
| /* However, if there are authenticated attributes, there must be a |
| * message digest attribute amongst them which corresponds to the |
| * digest we just calculated. |
| */ |
| if (sinfo->authattrs) { |
| u8 tag; |
| |
| if (!sinfo->msgdigest) { |
| pr_warn("Sig %u: No messageDigest\n", sinfo->index); |
| ret = -EKEYREJECTED; |
| goto error; |
| } |
| |
| if (sinfo->msgdigest_len != sig->digest_size) { |
| pr_debug("Sig %u: Invalid digest size (%u)\n", |
| sinfo->index, sinfo->msgdigest_len); |
| ret = -EBADMSG; |
| goto error; |
| } |
| |
| if (memcmp(sig->digest, sinfo->msgdigest, |
| sinfo->msgdigest_len) != 0) { |
| pr_debug("Sig %u: Message digest doesn't match\n", |
| sinfo->index); |
| ret = -EKEYREJECTED; |
| goto error; |
| } |
| |
| /* We then calculate anew, using the authenticated attributes |
| * as the contents of the digest instead. Note that we need to |
| * convert the attributes from a CONT.0 into a SET before we |
| * hash it. |
| */ |
| memset(sig->digest, 0, sig->digest_size); |
| |
| ret = crypto_shash_init(desc); |
| if (ret < 0) |
| goto error; |
| tag = ASN1_CONS_BIT | ASN1_SET; |
| ret = crypto_shash_update(desc, &tag, 1); |
| if (ret < 0) |
| goto error; |
| ret = crypto_shash_finup(desc, sinfo->authattrs, |
| sinfo->authattrs_len, sig->digest); |
| if (ret < 0) |
| goto error; |
| pr_devel("AADigest = [%*ph]\n", 8, sig->digest); |
| } |
| |
| error: |
| kfree(desc); |
| error_no_desc: |
| crypto_free_shash(tfm); |
| kleave(" = %d", ret); |
| return ret; |
| } |
| |
| int pkcs7_get_digest(struct pkcs7_message *pkcs7, const u8 **buf, u32 *len, |
| enum hash_algo *hash_algo) |
| { |
| struct pkcs7_signed_info *sinfo = pkcs7->signed_infos; |
| int i, ret; |
| |
| /* |
| * This function doesn't support messages with more than one signature. |
| */ |
| if (sinfo == NULL || sinfo->next != NULL) |
| return -EBADMSG; |
| |
| ret = pkcs7_digest(pkcs7, sinfo); |
| if (ret) |
| return ret; |
| |
| *buf = sinfo->sig->digest; |
| *len = sinfo->sig->digest_size; |
| |
| for (i = 0; i < HASH_ALGO__LAST; i++) |
| if (!strcmp(hash_algo_name[i], sinfo->sig->hash_algo)) { |
| *hash_algo = i; |
| break; |
| } |
| |
| return 0; |
| } |
| #endif /* !__UBOOT__ */ |
| |
| /* |
| * Find the key (X.509 certificate) to use to verify a PKCS#7 message. PKCS#7 |
| * uses the issuer's name and the issuing certificate serial number for |
| * matching purposes. These must match the certificate issuer's name (not |
| * subject's name) and the certificate serial number [RFC 2315 6.7]. |
| */ |
| static int pkcs7_find_key(struct pkcs7_message *pkcs7, |
| struct pkcs7_signed_info *sinfo) |
| { |
| struct x509_certificate *x509; |
| unsigned certix = 1; |
| |
| kenter("%u", sinfo->index); |
| |
| for (x509 = pkcs7->certs; x509; x509 = x509->next, certix++) { |
| /* I'm _assuming_ that the generator of the PKCS#7 message will |
| * encode the fields from the X.509 cert in the same way in the |
| * PKCS#7 message - but I can't be 100% sure of that. It's |
| * possible this will need element-by-element comparison. |
| */ |
| if (!asymmetric_key_id_same(x509->id, sinfo->sig->auth_ids[0])) |
| continue; |
| pr_devel("Sig %u: Found cert serial match X.509[%u]\n", |
| sinfo->index, certix); |
| |
| if (strcmp(x509->pub->pkey_algo, sinfo->sig->pkey_algo) != 0) { |
| pr_warn("Sig %u: X.509 algo and PKCS#7 sig algo don't match\n", |
| sinfo->index); |
| continue; |
| } |
| |
| sinfo->signer = x509; |
| return 0; |
| } |
| |
| /* The relevant X.509 cert isn't found here, but it might be found in |
| * the trust keyring. |
| */ |
| pr_debug("Sig %u: Issuing X.509 cert not found (#%*phN)\n", |
| sinfo->index, |
| sinfo->sig->auth_ids[0]->len, sinfo->sig->auth_ids[0]->data); |
| return 0; |
| } |
| |
| /* |
| * pkcs7_verify_sig_chain - Verify the internal certificate chain as best |
| * as we can. |
| * @pkcs7: PKCS7 Signed Data |
| * @sinfo: PKCS7 Signed Info |
| * @signer: Singer's certificate |
| * |
| * Build up and verify the internal certificate chain against a signature |
| * in @sinfo, using certificates contained in @pkcs7 as best as we can. |
| * If the chain reaches the end, the last certificate will be returned |
| * in @signer. |
| * |
| * Return: 0 - on success, non-zero error code - otherwise |
| */ |
| #ifdef __UBOOT__ |
| static int pkcs7_verify_sig_chain(struct pkcs7_message *pkcs7, |
| struct pkcs7_signed_info *sinfo, |
| struct x509_certificate **signer) |
| #else |
| static int pkcs7_verify_sig_chain(struct pkcs7_message *pkcs7, |
| struct pkcs7_signed_info *sinfo) |
| #endif |
| { |
| struct public_key_signature *sig; |
| struct x509_certificate *x509 = sinfo->signer, *p; |
| struct asymmetric_key_id *auth; |
| int ret; |
| |
| kenter(""); |
| |
| *signer = NULL; |
| |
| for (p = pkcs7->certs; p; p = p->next) |
| p->seen = false; |
| |
| for (;;) { |
| pr_debug("verify %s: %*phN\n", |
| x509->subject, |
| x509->raw_serial_size, x509->raw_serial); |
| x509->seen = true; |
| |
| if (x509->blacklisted) { |
| /* If this cert is blacklisted, then mark everything |
| * that depends on this as blacklisted too. |
| */ |
| sinfo->blacklisted = true; |
| for (p = sinfo->signer; p != x509; p = p->signer) |
| p->blacklisted = true; |
| pr_debug("- blacklisted\n"); |
| #ifdef __UBOOT__ |
| *signer = x509; |
| #endif |
| return 0; |
| } |
| |
| if (x509->unsupported_key) |
| goto unsupported_crypto_in_x509; |
| |
| pr_debug("- issuer %s\n", x509->issuer); |
| sig = x509->sig; |
| if (sig->auth_ids[0]) |
| pr_debug("- authkeyid.id %*phN\n", |
| sig->auth_ids[0]->len, sig->auth_ids[0]->data); |
| if (sig->auth_ids[1]) |
| pr_debug("- authkeyid.skid %*phN\n", |
| sig->auth_ids[1]->len, sig->auth_ids[1]->data); |
| |
| if (x509->self_signed) { |
| /* If there's no authority certificate specified, then |
| * the certificate must be self-signed and is the root |
| * of the chain. Likewise if the cert is its own |
| * authority. |
| */ |
| if (x509->unsupported_sig) |
| goto unsupported_crypto_in_x509; |
| x509->signer = x509; |
| pr_debug("- self-signed\n"); |
| #ifdef __UBOOT__ |
| *signer = x509; |
| #endif |
| return 0; |
| } |
| |
| /* Look through the X.509 certificates in the PKCS#7 message's |
| * list to see if the next one is there. |
| */ |
| auth = sig->auth_ids[0]; |
| if (auth) { |
| pr_debug("- want %*phN\n", auth->len, auth->data); |
| for (p = pkcs7->certs; p; p = p->next) { |
| pr_debug("- cmp [%u] %*phN\n", |
| p->index, p->id->len, p->id->data); |
| if (asymmetric_key_id_same(p->id, auth)) |
| goto found_issuer_check_skid; |
| } |
| } else if (sig->auth_ids[1]) { |
| auth = sig->auth_ids[1]; |
| pr_debug("- want %*phN\n", auth->len, auth->data); |
| for (p = pkcs7->certs; p; p = p->next) { |
| if (!p->skid) |
| continue; |
| pr_debug("- cmp [%u] %*phN\n", |
| p->index, p->skid->len, p->skid->data); |
| if (asymmetric_key_id_same(p->skid, auth)) |
| goto found_issuer; |
| } |
| } |
| |
| /* We didn't find the root of this chain */ |
| pr_debug("- top\n"); |
| #ifdef __UBOOT__ |
| *signer = x509; |
| #endif |
| return 0; |
| |
| found_issuer_check_skid: |
| /* We matched issuer + serialNumber, but if there's an |
| * authKeyId.keyId, that must match the CA subjKeyId also. |
| */ |
| if (sig->auth_ids[1] && |
| !asymmetric_key_id_same(p->skid, sig->auth_ids[1])) { |
| pr_warn("Sig %u: X.509 chain contains auth-skid nonmatch (%u->%u)\n", |
| sinfo->index, x509->index, p->index); |
| return -EKEYREJECTED; |
| } |
| found_issuer: |
| pr_debug("- subject %s\n", p->subject); |
| if (p->seen) { |
| pr_warn("Sig %u: X.509 chain contains loop\n", |
| sinfo->index); |
| #ifdef __UBOOT__ |
| *signer = p; |
| #endif |
| return 0; |
| } |
| ret = public_key_verify_signature(p->pub, x509->sig); |
| if (ret < 0) |
| return ret; |
| x509->signer = p; |
| if (x509 == p) { |
| pr_debug("- self-signed\n"); |
| #ifdef __UBOOT__ |
| *signer = p; |
| #endif |
| return 0; |
| } |
| x509 = p; |
| #ifndef __UBOOT__ |
| might_sleep(); |
| #endif |
| } |
| |
| unsupported_crypto_in_x509: |
| /* Just prune the certificate chain at this point if we lack some |
| * crypto module to go further. Note, however, we don't want to set |
| * sinfo->unsupported_crypto as the signed info block may still be |
| * validatable against an X.509 cert lower in the chain that we have a |
| * trusted copy of. |
| */ |
| return 0; |
| } |
| |
| /* |
| * pkcs7_verify_one - Verify one signed information block from a PKCS#7 |
| * message. |
| * @pkcs7: PKCS7 Signed Data |
| * @sinfo: PKCS7 Signed Info |
| * @signer: Signer's certificate |
| * |
| * Verify one signature in @sinfo and follow the certificate chain. |
| * If the chain reaches the end, the last certificate will be returned |
| * in @signer. |
| * |
| * Return: 0 - on success, non-zero error code - otherwise |
| */ |
| #ifdef __UBOOT__ |
| int pkcs7_verify_one(struct pkcs7_message *pkcs7, |
| struct pkcs7_signed_info *sinfo, |
| struct x509_certificate **signer) |
| #else |
| static int pkcs7_verify_one(struct pkcs7_message *pkcs7, |
| struct pkcs7_signed_info *sinfo) |
| #endif |
| { |
| int ret; |
| |
| kenter(",%u", sinfo->index); |
| |
| /* First of all, digest the data in the PKCS#7 message and the |
| * signed information block |
| */ |
| ret = pkcs7_digest(pkcs7, sinfo); |
| if (ret < 0) |
| return ret; |
| |
| /* Find the key for the signature if there is one */ |
| ret = pkcs7_find_key(pkcs7, sinfo); |
| if (ret < 0) |
| return ret; |
| |
| if (!sinfo->signer) |
| return 0; |
| |
| pr_devel("Using X.509[%u] for sig %u\n", |
| sinfo->signer->index, sinfo->index); |
| |
| /* Check that the PKCS#7 signing time is valid according to the X.509 |
| * certificate. We can't, however, check against the system clock |
| * since that may not have been set yet and may be wrong. |
| */ |
| if (test_bit(sinfo_has_signing_time, &sinfo->aa_set)) { |
| if (sinfo->signing_time < sinfo->signer->valid_from || |
| sinfo->signing_time > sinfo->signer->valid_to) { |
| pr_warn("Message signed outside of X.509 validity window\n"); |
| return -EKEYREJECTED; |
| } |
| } |
| |
| /* Verify the PKCS#7 binary against the key */ |
| ret = public_key_verify_signature(sinfo->signer->pub, sinfo->sig); |
| if (ret < 0) |
| return ret; |
| |
| pr_devel("Verified signature %u\n", sinfo->index); |
| |
| /* Verify the internal certificate chain */ |
| return pkcs7_verify_sig_chain(pkcs7, sinfo, signer); |
| } |
| |
| #ifndef __UBOOT__ |
| /** |
| * pkcs7_verify - Verify a PKCS#7 message |
| * @pkcs7: The PKCS#7 message to be verified |
| * @usage: The use to which the key is being put |
| * |
| * Verify a PKCS#7 message is internally consistent - that is, the data digest |
| * matches the digest in the AuthAttrs and any signature in the message or one |
| * of the X.509 certificates it carries that matches another X.509 cert in the |
| * message can be verified. |
| * |
| * This does not look to match the contents of the PKCS#7 message against any |
| * external public keys. |
| * |
| * Returns, in order of descending priority: |
| * |
| * (*) -EKEYREJECTED if a key was selected that had a usage restriction at |
| * odds with the specified usage, or: |
| * |
| * (*) -EKEYREJECTED if a signature failed to match for which we found an |
| * appropriate X.509 certificate, or: |
| * |
| * (*) -EBADMSG if some part of the message was invalid, or: |
| * |
| * (*) 0 if a signature chain passed verification, or: |
| * |
| * (*) -EKEYREJECTED if a blacklisted key was encountered, or: |
| * |
| * (*) -ENOPKG if none of the signature chains are verifiable because suitable |
| * crypto modules couldn't be found. |
| */ |
| int pkcs7_verify(struct pkcs7_message *pkcs7, |
| enum key_being_used_for usage) |
| { |
| struct pkcs7_signed_info *sinfo; |
| int actual_ret = -ENOPKG; |
| int ret; |
| |
| kenter(""); |
| |
| switch (usage) { |
| case VERIFYING_MODULE_SIGNATURE: |
| if (pkcs7->data_type != OID_data) { |
| pr_warn("Invalid module sig (not pkcs7-data)\n"); |
| return -EKEYREJECTED; |
| } |
| if (pkcs7->have_authattrs) { |
| pr_warn("Invalid module sig (has authattrs)\n"); |
| return -EKEYREJECTED; |
| } |
| break; |
| case VERIFYING_FIRMWARE_SIGNATURE: |
| if (pkcs7->data_type != OID_data) { |
| pr_warn("Invalid firmware sig (not pkcs7-data)\n"); |
| return -EKEYREJECTED; |
| } |
| if (!pkcs7->have_authattrs) { |
| pr_warn("Invalid firmware sig (missing authattrs)\n"); |
| return -EKEYREJECTED; |
| } |
| break; |
| case VERIFYING_KEXEC_PE_SIGNATURE: |
| if (pkcs7->data_type != OID_msIndirectData) { |
| pr_warn("Invalid kexec sig (not Authenticode)\n"); |
| return -EKEYREJECTED; |
| } |
| /* Authattr presence checked in parser */ |
| break; |
| case VERIFYING_UNSPECIFIED_SIGNATURE: |
| if (pkcs7->data_type != OID_data) { |
| pr_warn("Invalid unspecified sig (not pkcs7-data)\n"); |
| return -EKEYREJECTED; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| for (sinfo = pkcs7->signed_infos; sinfo; sinfo = sinfo->next) { |
| ret = pkcs7_verify_one(pkcs7, sinfo); |
| if (sinfo->blacklisted) { |
| if (actual_ret == -ENOPKG) |
| actual_ret = -EKEYREJECTED; |
| continue; |
| } |
| if (ret < 0) { |
| if (ret == -ENOPKG) { |
| sinfo->unsupported_crypto = true; |
| continue; |
| } |
| kleave(" = %d", ret); |
| return ret; |
| } |
| actual_ret = 0; |
| } |
| |
| kleave(" = %d", actual_ret); |
| return actual_ret; |
| } |
| EXPORT_SYMBOL_GPL(pkcs7_verify); |
| |
| /** |
| * pkcs7_supply_detached_data - Supply the data needed to verify a PKCS#7 message |
| * @pkcs7: The PKCS#7 message |
| * @data: The data to be verified |
| * @datalen: The amount of data |
| * |
| * Supply the detached data needed to verify a PKCS#7 message. Note that no |
| * attempt to retain/pin the data is made. That is left to the caller. The |
| * data will not be modified by pkcs7_verify() and will not be freed when the |
| * PKCS#7 message is freed. |
| * |
| * Returns -EINVAL if data is already supplied in the message, 0 otherwise. |
| */ |
| int pkcs7_supply_detached_data(struct pkcs7_message *pkcs7, |
| const void *data, size_t datalen) |
| { |
| if (pkcs7->data) { |
| pr_debug("Data already supplied\n"); |
| return -EINVAL; |
| } |
| pkcs7->data = data; |
| pkcs7->data_len = datalen; |
| return 0; |
| } |
| #endif /* __UBOOT__ */ |