blob: 99c325a4ff1f9dce7be21b7aefbc1b6b58d99d8a [file] [log] [blame]
/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_ddr_sdram.h>
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
#endif
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
unsigned int i;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
switch (ctrl_num) {
case 0:
ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
break;
case 1:
ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
break;
default:
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
return;
}
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i == 0) {
out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs0_config, regs->cs[i].config);
out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
} else if (i == 1) {
out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs1_config, regs->cs[i].config);
out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
} else if (i == 2) {
out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs2_config, regs->cs[i].config);
out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
} else if (i == 3) {
out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs3_config, regs->cs[i].config);
out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
}
}
out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
out_be32(&ddr->init_addr, regs->ddr_init_addr);
out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
out_be32(&ddr->ddr_pd_cntl, regs->ddr_pd_cntl);
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
/* Set, but do not enable the memory */
temp_sdram_cfg = regs->ddr_sdram_cfg;
temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
/*
* For 8572 DDR1 erratum - DDR controller may enter illegal state
* when operatiing in 32-bit bus mode with 4-beat bursts,
* This erratum does not affect DDR3 mode, only for DDR2 mode.
*/
#ifdef CONFIG_MPC8572
if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
&& in_be32(&ddr->sdram_cfg) & 0x80000) {
/* set DEBUG_1[31] */
u32 temp = in_be32(&ddr->debug_1);
out_be32(&ddr->debug_1, temp | 1);
}
#endif
/*
* 200 painful micro-seconds must elapse between
* the DDR clock setup and the DDR config enable.
*/
udelay(200);
asm volatile("sync;isync");
/* Let the controller go */
temp_sdram_cfg = in_be32(&ddr->sdram_cfg);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
udelay(10000); /* throttle polling rate */
}
}