| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2016 |
| * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc |
| * |
| * based on arch/powerpc/include/asm/mpc85xx_gpio.h, which is |
| * |
| * Copyright 2010 eXMeritus, A Boeing Company |
| * Copyright 2020-2021 NXP |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <mapmem.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <dm/of_access.h> |
| |
| struct mpc8xxx_gpio_data { |
| /* The bank's register base in memory */ |
| struct ccsr_gpio __iomem *base; |
| /* The address of the registers; used to identify the bank */ |
| phys_addr_t addr; |
| /* The GPIO count of the bank */ |
| uint gpio_count; |
| /* The GPDAT register cannot be used to determine the value of output |
| * pins on MPC8572/MPC8536, so we shadow it and use the shadowed value |
| * for output pins |
| */ |
| u32 dat_shadow; |
| ulong type; |
| bool little_endian; |
| }; |
| |
| enum { |
| MPC8XXX_GPIO_TYPE, |
| MPC5121_GPIO_TYPE, |
| }; |
| |
| inline u32 gpio_mask(uint gpio) |
| { |
| return (1U << (31 - (gpio))); |
| } |
| |
| static inline u32 mpc8xxx_gpio_get_val(struct udevice *dev, u32 mask) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| |
| if (data->little_endian) |
| return in_le32(&data->base->gpdat) & mask; |
| else |
| return in_be32(&data->base->gpdat) & mask; |
| } |
| |
| static inline u32 mpc8xxx_gpio_get_dir(struct udevice *dev, u32 mask) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| |
| if (data->little_endian) |
| return in_le32(&data->base->gpdir) & mask; |
| else |
| return in_be32(&data->base->gpdir) & mask; |
| } |
| |
| static inline int mpc8xxx_gpio_open_drain_val(struct udevice *dev, u32 mask) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| |
| if (data->little_endian) |
| return in_le32(&data->base->gpodr) & mask; |
| else |
| return in_be32(&data->base->gpodr) & mask; |
| } |
| |
| static inline void mpc8xxx_gpio_open_drain_on(struct udevice *dev, u32 |
| gpios) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| /* GPODR register 1 -> open drain on */ |
| if (data->little_endian) |
| setbits_le32(&data->base->gpodr, gpios); |
| else |
| setbits_be32(&data->base->gpodr, gpios); |
| } |
| |
| static inline void mpc8xxx_gpio_open_drain_off(struct udevice *dev, |
| u32 gpios) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| /* GPODR register 0 -> open drain off (actively driven) */ |
| if (data->little_endian) |
| clrbits_le32(&data->base->gpodr, gpios); |
| else |
| clrbits_be32(&data->base->gpodr, gpios); |
| } |
| |
| static int mpc8xxx_gpio_direction_input(struct udevice *dev, uint gpio) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| u32 mask = gpio_mask(gpio); |
| |
| /* GPDIR register 0 -> input */ |
| if (data->little_endian) |
| clrbits_le32(&data->base->gpdir, mask); |
| else |
| clrbits_be32(&data->base->gpdir, mask); |
| |
| return 0; |
| } |
| |
| static int mpc8xxx_gpio_set_value(struct udevice *dev, uint gpio, int value) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| struct ccsr_gpio *base = data->base; |
| u32 mask = gpio_mask(gpio); |
| u32 gpdir; |
| |
| if (value) { |
| data->dat_shadow |= mask; |
| } else { |
| data->dat_shadow &= ~mask; |
| } |
| |
| if (data->little_endian) |
| gpdir = in_le32(&base->gpdir); |
| else |
| gpdir = in_be32(&base->gpdir); |
| |
| gpdir |= gpio_mask(gpio); |
| |
| if (data->little_endian) { |
| out_le32(&base->gpdat, gpdir & data->dat_shadow); |
| out_le32(&base->gpdir, gpdir); |
| } else { |
| out_be32(&base->gpdat, gpdir & data->dat_shadow); |
| out_be32(&base->gpdir, gpdir); |
| } |
| |
| return 0; |
| } |
| |
| static int mpc8xxx_gpio_direction_output(struct udevice *dev, uint gpio, |
| int value) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| |
| /* GPIO 28..31 are input only on MPC5121 */ |
| if (data->type == MPC5121_GPIO_TYPE && gpio >= 28) |
| return -EINVAL; |
| |
| return mpc8xxx_gpio_set_value(dev, gpio, value); |
| } |
| |
| static int mpc8xxx_gpio_get_value(struct udevice *dev, uint gpio) |
| { |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| |
| if (!!mpc8xxx_gpio_get_dir(dev, gpio_mask(gpio))) { |
| /* Output -> use shadowed value */ |
| return !!(data->dat_shadow & gpio_mask(gpio)); |
| } |
| |
| /* Input -> read value from GPDAT register */ |
| return !!mpc8xxx_gpio_get_val(dev, gpio_mask(gpio)); |
| } |
| |
| static int mpc8xxx_gpio_get_function(struct udevice *dev, uint gpio) |
| { |
| int dir; |
| |
| dir = !!mpc8xxx_gpio_get_dir(dev, gpio_mask(gpio)); |
| return dir ? GPIOF_OUTPUT : GPIOF_INPUT; |
| } |
| |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| static int mpc8xxx_gpio_of_to_plat(struct udevice *dev) |
| { |
| struct mpc8xxx_gpio_plat *plat = dev_get_plat(dev); |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| |
| if (dev_read_bool(dev, "little-endian")) |
| data->little_endian = true; |
| |
| plat->addr = dev_read_addr_size_index(dev, 0, (fdt_size_t *)&plat->size); |
| plat->ngpios = dev_read_u32_default(dev, "ngpios", 32); |
| |
| return 0; |
| } |
| #endif |
| |
| static int mpc8xxx_gpio_plat_to_priv(struct udevice *dev) |
| { |
| struct mpc8xxx_gpio_data *priv = dev_get_priv(dev); |
| struct mpc8xxx_gpio_plat *plat = dev_get_plat(dev); |
| unsigned long size = plat->size; |
| ulong driver_data = dev_get_driver_data(dev); |
| |
| if (size == 0) |
| size = 0x100; |
| |
| priv->addr = plat->addr; |
| priv->base = map_sysmem(plat->addr, size); |
| |
| if (!priv->base) |
| return -ENOMEM; |
| |
| priv->gpio_count = plat->ngpios; |
| priv->dat_shadow = 0; |
| |
| priv->type = driver_data; |
| |
| return 0; |
| } |
| |
| static int mpc8xxx_gpio_probe(struct udevice *dev) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct mpc8xxx_gpio_data *data = dev_get_priv(dev); |
| char name[32], *str; |
| |
| mpc8xxx_gpio_plat_to_priv(dev); |
| |
| snprintf(name, sizeof(name), "MPC@%.8llx", |
| (unsigned long long)data->addr); |
| str = strdup(name); |
| |
| if (!str) |
| return -ENOMEM; |
| |
| if (device_is_compatible(dev, "fsl,qoriq-gpio")) { |
| if (data->little_endian) |
| out_le32(&data->base->gpibe, 0xffffffff); |
| else |
| out_be32(&data->base->gpibe, 0xffffffff); |
| } |
| |
| uc_priv->bank_name = str; |
| uc_priv->gpio_count = data->gpio_count; |
| |
| return 0; |
| } |
| |
| static const struct dm_gpio_ops gpio_mpc8xxx_ops = { |
| .direction_input = mpc8xxx_gpio_direction_input, |
| .direction_output = mpc8xxx_gpio_direction_output, |
| .get_value = mpc8xxx_gpio_get_value, |
| .set_value = mpc8xxx_gpio_set_value, |
| .get_function = mpc8xxx_gpio_get_function, |
| }; |
| |
| static const struct udevice_id mpc8xxx_gpio_ids[] = { |
| { .compatible = "fsl,pq3-gpio", .data = MPC8XXX_GPIO_TYPE }, |
| { .compatible = "fsl,mpc8308-gpio", .data = MPC8XXX_GPIO_TYPE }, |
| { .compatible = "fsl,mpc8349-gpio", .data = MPC8XXX_GPIO_TYPE }, |
| { .compatible = "fsl,mpc8572-gpio", .data = MPC8XXX_GPIO_TYPE}, |
| { .compatible = "fsl,mpc8610-gpio", .data = MPC8XXX_GPIO_TYPE}, |
| { .compatible = "fsl,mpc5121-gpio", .data = MPC5121_GPIO_TYPE, }, |
| { .compatible = "fsl,qoriq-gpio", .data = MPC8XXX_GPIO_TYPE }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(gpio_mpc8xxx) = { |
| .name = "gpio_mpc8xxx", |
| .id = UCLASS_GPIO, |
| .ops = &gpio_mpc8xxx_ops, |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| .of_to_plat = mpc8xxx_gpio_of_to_plat, |
| .plat_auto = sizeof(struct mpc8xxx_gpio_plat), |
| .of_match = mpc8xxx_gpio_ids, |
| #endif |
| .probe = mpc8xxx_gpio_probe, |
| .priv_auto = sizeof(struct mpc8xxx_gpio_data), |
| }; |