| config DM_REGULATOR |
| bool "Enable Driver Model for REGULATOR drivers (UCLASS_REGULATOR)" |
| depends on DM |
| ---help--- |
| This config enables the driver model regulator support. |
| UCLASS_REGULATOR - designed to provide a common API for basic regulator's |
| functions, like get/set Voltage or Current value, enable state, etc... |
| Note: |
| When enabling this, please read the description, found in the files: |
| - 'include/power/pmic.h' |
| - 'include/power/regulator.h' |
| - 'drivers/power/pmic/pmic-uclass.c' |
| - 'drivers/power/pmic/regulator-uclass.c' |
| It's important to call the device_bind() with the proper node offset, |
| when binding the regulator devices. The pmic_bind_childs() can be used |
| for this purpose if PMIC I/O driver is implemented or dm_scan_fdt_dev() |
| otherwise. Detailed information can be found in the header file. |
| |
| config SPL_DM_REGULATOR |
| bool "Enable regulators for SPL" |
| depends on DM_REGULATOR && SPL_POWER |
| ---help--- |
| Regulators are seldom needed in SPL. Even if they are accessed, some |
| code space can be saved by accessing the PMIC registers directly. |
| Enable this option if you need regulators in SPL and can cope with |
| the extra code size. |
| |
| config REGULATOR_ACT8846 |
| bool "Enable driver for ACT8846 regulator" |
| depends on DM_REGULATOR && PMIC_ACT8846 |
| ---help--- |
| Enable support for the regulator functions of the ACT8846 PMIC. The |
| driver implements get/set api for the various BUCKS and LDOS supported |
| by the PMIC device. This driver is controlled by a device tree node |
| which includes voltage limits. |
| |
| config REGULATOR_AS3722 |
| bool "Enable driver for AS7322 regulator" |
| depends on DM_REGULATOR && PMIC_AS3722 |
| help |
| Enable support for the regulator functions of the AS3722. The |
| driver implements enable/disable for step-down bucks and LDOs, |
| but does not yet support change voltages. Currently this must be |
| done using direct register writes to the PMIC. |
| |
| config DM_REGULATOR_BD71837 |
| bool "Enable Driver Model for ROHM BD71837/BD71847 regulators" |
| depends on DM_REGULATOR && DM_PMIC_BD71837 |
| help |
| This config enables implementation of driver-model regulator uclass |
| features for regulators on ROHM BD71837 and BD71847 PMICs. |
| BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced version |
| containing 6 bucks and 6 LDOs. The driver implements get/set api for |
| value and enable. |
| |
| config SPL_DM_REGULATOR_BD71837 |
| bool "Enable Driver Model for ROHM BD71837/BD71847 regulators in SPL" |
| depends on DM_REGULATOR_BD71837 |
| help |
| This config enables implementation of driver-model regulator uclass |
| features for regulators on ROHM BD71837 and BD71847 in SPL. |
| |
| config DM_REGULATOR_DA9063 |
| bool "Enable Driver Model for REGULATOR DA9063" |
| depends on DM_REGULATOR && DM_PMIC_DA9063 |
| help |
| This config enables implementation of driver-model regulator uclass |
| features for REGULATOR DA9063. |
| The driver implements get/set api for value, enable and mode for all |
| regulators. It also implements the get/set api for current for the |
| buck regulators. |
| |
| config SPL_DM_REGULATOR_DA9063 |
| bool "Enable Driver Model for REGULATOR DA9063 in SPL" |
| depends on DM_REGULATOR && DM_PMIC_DA9063 && SPL |
| help |
| This config enables implementation of driver-model regulator uclass |
| features for REGULATOR DA9063. |
| The driver implements get/set api for value, enable and mode for all |
| regulators. It also implements the get/set api for current for the |
| buck regulators. |
| |
| config DM_REGULATOR_PFUZE100 |
| bool "Enable Driver Model for REGULATOR PFUZE100" |
| depends on DM_REGULATOR && DM_PMIC_PFUZE100 |
| ---help--- |
| This config enables implementation of driver-model regulator uclass |
| features for REGULATOR PFUZE100. The driver implements get/set api for: |
| value, enable and mode. |
| |
| config REGULATOR_PWM |
| bool "Enable driver for PWM regulators" |
| depends on DM_REGULATOR |
| ---help--- |
| Enable support for the PWM regulator functions which voltage are |
| controlled by PWM duty ratio. Some of Rockchip board using this kind |
| of regulator. The driver implements get/set api for the various BUCKS. |
| This driver is controlled by a device tree node |
| which includes voltage limits. |
| |
| config SPL_REGULATOR_PWM |
| bool "Enable Driver for PWM regulators in SPL" |
| depends on REGULATOR_PWM |
| help |
| This config enables implementation of driver-model regulator uclass |
| features for PWM regulators in SPL. |
| |
| config DM_REGULATOR_MAX77686 |
| bool "Enable Driver Model for REGULATOR MAX77686" |
| depends on DM_REGULATOR && DM_PMIC_MAX77686 |
| ---help--- |
| This config enables implementation of driver-model regulator uclass |
| features for REGULATOR MAX77686. The driver implements get/set api for: |
| value, enable and mode. |
| |
| config DM_REGULATOR_FAN53555 |
| bool "Enable Driver Model for REGULATOR FAN53555" |
| depends on DM_PMIC_FAN53555 |
| help |
| This config enables implementation of driver-model regulator |
| uclass features for the FAN53555 regulator. The FAN53555 is |
| a (family of) single-output regulators that supports |
| transitioning between two different output voltages based on |
| an voltage selection pin. |
| |
| The driver implements a get/set api for the voltage of the |
| 'normal mode' voltage only. Switching to 'suspend mode' |
| (i.e. the alternate voltage), disabling output via software, |
| or switching the mode is not supported by this driver (at |
| this time). |
| |
| config DM_REGULATOR_COMMON |
| bool |
| depends on DM_REGULATOR |
| |
| config SPL_DM_REGULATOR_COMMON |
| bool |
| depends on DM_REGULATOR |
| |
| config DM_REGULATOR_FIXED |
| bool "Enable Driver Model for REGULATOR Fixed value" |
| depends on DM_REGULATOR |
| select DM_REGULATOR_COMMON |
| ---help--- |
| This config enables implementation of driver-model regulator uclass |
| features for fixed value regulators. The driver implements get/set api |
| for enable and get only for voltage value. |
| |
| config SPL_DM_REGULATOR_FIXED |
| bool "Enable Driver Model for REGULATOR Fixed value in SPL" |
| depends on DM_REGULATOR_FIXED |
| select SPL_DM_REGULATOR_COMMON |
| ---help--- |
| This config enables implementation of driver-model regulator uclass |
| features for fixed value regulators in SPL. |
| |
| config DM_REGULATOR_GPIO |
| bool "Enable Driver Model for GPIO REGULATOR" |
| depends on DM_REGULATOR && DM_GPIO |
| select DM_REGULATOR_COMMON |
| ---help--- |
| This config enables implementation of driver-model regulator uclass |
| features for gpio regulators. The driver implements get/set for |
| voltage value. |
| |
| config SPL_DM_REGULATOR_GPIO |
| bool "Enable Driver Model for GPIO REGULATOR in SPL" |
| depends on DM_REGULATOR_GPIO && SPL_GPIO |
| select SPL_DM_REGULATOR_COMMON |
| ---help--- |
| This config enables implementation of driver-model regulator uclass |
| features for gpio regulators in SPL. |
| |
| config REGULATOR_RK8XX |
| bool "Enable driver for RK8XX regulators" |
| depends on DM_REGULATOR && PMIC_RK8XX |
| ---help--- |
| Enable support for the regulator functions of the RK8XX PMIC. The |
| driver implements get/set api for the various BUCKS and LDOs supported |
| by the PMIC device. This driver is controlled by a device tree node |
| which includes voltage limits. |
| |
| config DM_REGULATOR_S2MPS11 |
| bool "Enable driver for S2MPS11 regulator" |
| depends on DM_REGULATOR && PMIC_S2MPS11 |
| ---help--- |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR S2MPS11. |
| The driver implements get/set api for: value and enable. |
| |
| config REGULATOR_S5M8767 |
| bool "Enable support for S5M8767 regulator" |
| depends on DM_REGULATOR && PMIC_S5M8767 |
| ---help--- |
| This enables the regulator features of the S5M8767, allowing voltages |
| to be set, etc. The driver is not fully complete but supports most |
| common requirements, including all LDOs and BUCKs. This allows many |
| supplies to be set automatically using the device tree values. |
| |
| config DM_REGULATOR_SANDBOX |
| bool "Enable Driver Model for Sandbox PMIC regulator" |
| depends on DM_REGULATOR && DM_PMIC_SANDBOX |
| ---help--- |
| Enable the regulator driver for emulated Sandbox PMIC. |
| The emulated PMIC device depends on two drivers: |
| - sandbox PMIC I/O driver - implements dm pmic operations |
| - sandbox PMIC regulator driver - implements dm regulator operations |
| - sandbox PMIC i2c emul driver - emulates the PMIC's I2C transmission |
| |
| The regulator driver provides uclass operations for sandbox PMIC's |
| regulators. The driver implements get/set api for: voltage, current, |
| operation mode and enable state. |
| The driver supports LDO and BUCK regulators. |
| |
| The Sandbox PMIC info: |
| * I/O interface: |
| - I2C chip address: 0x40 |
| - first register address: 0x0 |
| - register count: 0x10 |
| * Adjustable outputs: |
| - 2x LDO |
| - 2x BUCK |
| - Each, with a different operating conditions (header). |
| * Reset values: |
| - set by i2c emul driver's probe() (defaults in header) |
| |
| A detailed information can be found in header: '<power/sandbox_pmic.h>' |
| Binding info: 'doc/device-tree-bindings/pmic/max77686.txt' |
| |
| config REGULATOR_TPS65090 |
| bool "Enable driver for TPS65090 PMIC regulators" |
| depends on PMIC_TPS65090 |
| ---help--- |
| The TPS65090 provides several FETs (Field-effect Transistors, |
| effectively switches) which are supported by this driver as |
| regulators, one for each FET. The standard regulator interface is |
| supported, but it is only possible to turn the regulators on or off. |
| There is no voltage/current control. |
| |
| config DM_REGULATOR_PALMAS |
| bool "Enable driver for PALMAS PMIC regulators" |
| depends on PMIC_PALMAS |
| ---help--- |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR PALMAS and the family of PALMAS PMICs. |
| The driver implements get/set api for: value and enable. |
| |
| config DM_REGULATOR_PBIAS |
| bool "Enable driver for PBIAS regulator" |
| depends on DM_REGULATOR |
| select REGMAP |
| select SYSCON |
| ---help--- |
| This enables implementation of driver-model regulator uclass |
| features for pseudo-regulator PBIAS found in the OMAP SOCs. |
| This pseudo-regulator is used to provide a BIAS voltage to MMC1 |
| signal pads and must be configured properly during a voltage switch. |
| Voltage switching is required by some operating modes of SDcards and |
| eMMC. |
| |
| config DM_REGULATOR_LP873X |
| bool "Enable driver for LP873X PMIC regulators" |
| depends on PMIC_LP873X |
| ---help--- |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR LP873X and the family of LP873X PMICs. |
| The driver implements get/set api for: value and enable. |
| |
| config DM_REGULATOR_LP87565 |
| bool "Enable driver for LP87565 PMIC regulators" |
| depends on PMIC_LP87565 |
| ---help--- |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR LP87565 and the family of LP87565 PMICs. |
| LP87565 series of PMICs have 4 single phase BUCKs that can also |
| be configured in multi phase modes. The driver implements |
| get/set api for value and enable. |
| |
| config DM_REGULATOR_STM32_VREFBUF |
| bool "Enable driver for STMicroelectronics STM32 VREFBUF" |
| depends on DM_REGULATOR && (STM32H7 || ARCH_STM32MP) |
| help |
| This driver supports STMicroelectronics STM32 VREFBUF (voltage |
| reference buffer) which can be used as voltage reference for |
| internal ADCs, DACs and also for external components through |
| dedicated Vref+ pin. |
| |
| config DM_REGULATOR_TPS65910 |
| bool "Enable driver for TPS65910 PMIC regulators" |
| depends on DM_PMIC_TPS65910 |
| ---help--- |
| The TPS65910 PMIC provides 4 SMPSs and 8 LDOs. This driver supports all |
| regulator types of the TPS65910 (BUCK, BOOST and LDO). It implements |
| the get/set api for value and enable. |
| |
| config DM_REGULATOR_TPS62360 |
| bool "Enable driver for TPS6236x Power Regulator" |
| depends on DM_REGULATOR |
| help |
| The TPS6236X DC/DC step down converter provides a single output |
| power line peaking at 3A current. This driver supports all four |
| variants of the chip (TPS62360, TPS62361, TPS62362, TPS62363). It |
| implements the get/set api for value only, as the power line is |
| always on. |
| |
| config DM_REGULATOR_STPMIC1 |
| bool "Enable driver for STPMIC1 regulators" |
| depends on DM_REGULATOR && PMIC_STPMIC1 |
| ---help--- |
| Enable support for the regulator functions of the STPMIC1 PMIC. The |
| driver implements get/set api for the various BUCKS and LDOs supported |
| by the PMIC device. This driver is controlled by a device tree node |
| which includes voltage limits. |
| |
| config DM_REGULATOR_ANATOP |
| bool "Enable driver for ANATOP regulators" |
| depends on DM_REGULATOR |
| select REGMAP |
| select SYSCON |
| help |
| Enable support for the Freescale i.MX on-chip ANATOP LDO |
| regulators. It is recommended that this option be enabled on |
| i.MX6 platform. |
| |
| config SPL_DM_REGULATOR_STPMIC1 |
| bool "Enable driver for STPMIC1 regulators in SPL" |
| depends on SPL_DM_REGULATOR && PMIC_STPMIC1 |
| help |
| Enable support for the regulator functions of the STPMIC1 PMIC in SPL. |
| |
| config SPL_DM_REGULATOR_PALMAS |
| bool "Enable driver for PALMAS PMIC regulators" |
| depends on SPL_PMIC_PALMAS |
| help |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR PALMAS and the family of PALMAS PMICs. |
| The driver implements get/set api for: value and enable in SPL. |
| |
| config SPL_DM_REGULATOR_LP87565 |
| bool "Enable driver for LP87565 PMIC regulators" |
| depends on SPL_PMIC_LP87565 |
| help |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR LP87565 and the family of LP87565 PMICs. |
| LP87565 series of PMICs have 4 single phase BUCKs that can also |
| be configured in multi phase modes. The driver implements |
| get/set api for value and enable in SPL. |
| |
| config SPL_DM_REGULATOR_LP873X |
| bool "Enable driver for LP873X PMIC regulators" |
| depends on SPL_PMIC_LP873X |
| help |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR LP873X and the family of LP873X PMICs. |
| The driver implements get/set api for: value and enable in SPL. |
| |
| config DM_REGULATOR_TPS65941 |
| bool "Enable driver for TPS65941 PMIC regulators" |
| depends on PMIC_TPS65941 |
| help |
| This enables implementation of driver-model regulator uclass |
| features for REGULATOR TPS65941 and the family of TPS65941 PMICs. |
| TPS65941 series of PMICs have 5 single phase BUCKs that can also |
| be configured in multi phase modes & 4 LDOs. The driver implements |
| get/set api for value and enable. |
| |
| config DM_REGULATOR_SCMI |
| bool "Enable driver for SCMI voltage domain regulators" |
| depends on DM_REGULATOR |
| select SCMI_AGENT |
| help |
| Enable this option if you want to support regulators exposed through |
| the SCMI voltage domain protocol by a SCMI server. |