| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2012 Michal Simek <monstr@monstr.eu> |
| * Copyright (C) 2012 Xilinx, Inc. All rights reserved. |
| */ |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <init.h> |
| #include <zynqpl.h> |
| #include <asm/cache.h> |
| #include <asm/io.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/ps7_init_gpl.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #define ZYNQ_SILICON_VER_MASK 0xF0000000 |
| #define ZYNQ_SILICON_VER_SHIFT 28 |
| |
| #if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \ |
| (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD)) |
| xilinx_desc fpga = { |
| .family = xilinx_zynq, |
| .iface = devcfg, |
| .operations = &zynq_op, |
| }; |
| #endif |
| |
| static const struct { |
| u8 idcode; |
| #if defined(CONFIG_FPGA) |
| u32 fpga_size; |
| #endif |
| char *devicename; |
| } zynq_fpga_descs[] = { |
| ZYNQ_DESC(7Z007S), |
| ZYNQ_DESC(7Z010), |
| ZYNQ_DESC(7Z012S), |
| ZYNQ_DESC(7Z014S), |
| ZYNQ_DESC(7Z015), |
| ZYNQ_DESC(7Z020), |
| ZYNQ_DESC(7Z030), |
| ZYNQ_DESC(7Z035), |
| ZYNQ_DESC(7Z045), |
| ZYNQ_DESC(7Z100), |
| { /* Sentinel */ }, |
| }; |
| |
| int arch_cpu_init(void) |
| { |
| zynq_slcr_unlock(); |
| #ifndef CONFIG_SPL_BUILD |
| /* Device config APB, unlock the PCAP */ |
| writel(0x757BDF0D, &devcfg_base->unlock); |
| writel(0xFFFFFFFF, &devcfg_base->rom_shadow); |
| |
| #if (CONFIG_SYS_SDRAM_BASE == 0) |
| /* remap DDR to zero, FILTERSTART */ |
| writel(0, &scu_base->filter_start); |
| |
| /* OCM_CFG, Mask out the ROM, map ram into upper addresses */ |
| writel(0x1F, &slcr_base->ocm_cfg); |
| /* FPGA_RST_CTRL, clear resets on AXI fabric ports */ |
| writel(0x0, &slcr_base->fpga_rst_ctrl); |
| /* Set urgent bits with register */ |
| writel(0x0, &slcr_base->ddr_urgent_sel); |
| /* Urgent write, ports S2/S3 */ |
| writel(0xC, &slcr_base->ddr_urgent); |
| #endif |
| #endif |
| zynq_slcr_lock(); |
| |
| return 0; |
| } |
| |
| unsigned int zynq_get_silicon_version(void) |
| { |
| return (readl(&devcfg_base->mctrl) & ZYNQ_SILICON_VER_MASK) |
| >> ZYNQ_SILICON_VER_SHIFT; |
| } |
| |
| void reset_cpu(ulong addr) |
| { |
| zynq_slcr_cpu_reset(); |
| while (1) |
| ; |
| } |
| |
| #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) |
| void enable_caches(void) |
| { |
| /* Enable D-cache. I-cache is already enabled in start.S */ |
| dcache_enable(); |
| } |
| #endif |
| |
| static int __maybe_unused cpu_desc_id(void) |
| { |
| u32 idcode; |
| u8 i; |
| |
| idcode = zynq_slcr_get_idcode(); |
| for (i = 0; zynq_fpga_descs[i].idcode; i++) { |
| if (zynq_fpga_descs[i].idcode == idcode) |
| return i; |
| } |
| |
| return -ENODEV; |
| } |
| |
| #if defined(CONFIG_ARCH_EARLY_INIT_R) |
| int arch_early_init_r(void) |
| { |
| #if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \ |
| (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD)) |
| int cpu_id = cpu_desc_id(); |
| |
| if (cpu_id < 0) |
| return 0; |
| |
| fpga.size = zynq_fpga_descs[cpu_id].fpga_size; |
| fpga.name = zynq_fpga_descs[cpu_id].devicename; |
| fpga_init(); |
| fpga_add(fpga_xilinx, &fpga); |
| #endif |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_DISPLAY_CPUINFO |
| int print_cpuinfo(void) |
| { |
| u32 version; |
| int cpu_id = cpu_desc_id(); |
| |
| if (cpu_id < 0) |
| return 0; |
| |
| version = zynq_get_silicon_version() << 1; |
| if (version > (PCW_SILICON_VERSION_3 << 1)) |
| version += 1; |
| |
| printf("CPU: Zynq %s\n", zynq_fpga_descs[cpu_id].devicename); |
| printf("Silicon: v%d.%d\n", version >> 1, version & 1); |
| return 0; |
| } |
| #endif |