| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com> |
| * Copyright 2007 Embedded Specialties, Inc. |
| * Joe Hamman joe.hamman@embeddedspecialties.com |
| * |
| * Copyright 2004 Freescale Semiconductor. |
| * Jeff Brown |
| * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) |
| * |
| * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <init.h> |
| #include <log.h> |
| #include <pci.h> |
| #include <asm/global_data.h> |
| #include <asm/processor.h> |
| #include <asm/immap_86xx.h> |
| #include <asm/fsl_pci.h> |
| #include <fsl_ddr_sdram.h> |
| #include <asm/fsl_serdes.h> |
| #include <linux/delay.h> |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| long int fixed_sdram (void); |
| |
| int board_early_init_f (void) |
| { |
| return 0; |
| } |
| |
| int checkboard (void) |
| { |
| puts ("Board: Wind River SBC8641D\n"); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| long dram_size = 0; |
| |
| #if defined(CONFIG_SPD_EEPROM) |
| dram_size = fsl_ddr_sdram(); |
| #else |
| dram_size = fixed_sdram (); |
| #endif |
| |
| debug(" DDR: "); |
| gd->ram_size = dram_size; |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_SYS_DRAM_TEST) |
| int testdram(void) |
| { |
| uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; |
| uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; |
| uint *p; |
| |
| puts ("SDRAM test phase 1:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0xaaaaaaaa; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0xaaaaaaaa) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| puts ("SDRAM test phase 2:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0x55555555; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0x55555555) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| puts ("SDRAM test passed.\n"); |
| return 0; |
| } |
| #endif |
| |
| #if !defined(CONFIG_SPD_EEPROM) |
| /* |
| * Fixed sdram init -- doesn't use serial presence detect. |
| */ |
| long int fixed_sdram (void) |
| { |
| #if !defined(CONFIG_SYS_RAMBOOT) |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| volatile struct ccsr_ddr *ddr = &immap->im_ddr1; |
| |
| ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; |
| ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; |
| ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS; |
| ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS; |
| ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; |
| ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG; |
| ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG; |
| ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG; |
| ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; |
| ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; |
| ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; |
| ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; |
| ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A; |
| ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2; |
| ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; |
| ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; |
| ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL; |
| ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; |
| ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; |
| ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; |
| |
| asm ("sync;isync"); |
| |
| udelay(500); |
| |
| ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B; |
| asm ("sync; isync"); |
| |
| udelay(500); |
| ddr = &immap->im_ddr2; |
| |
| ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS; |
| ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS; |
| ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS; |
| ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS; |
| ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG; |
| ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG; |
| ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG; |
| ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG; |
| ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH; |
| ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0; |
| ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1; |
| ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2; |
| ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A; |
| ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2; |
| ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1; |
| ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2; |
| ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL; |
| ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL; |
| ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT; |
| ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL; |
| |
| asm ("sync;isync"); |
| |
| udelay(500); |
| |
| ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B; |
| asm ("sync; isync"); |
| |
| udelay(500); |
| #endif |
| return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; |
| } |
| #endif /* !defined(CONFIG_SPD_EEPROM) */ |
| |
| #if defined(CONFIG_PCI) |
| /* |
| * Initialize PCI Devices, report devices found. |
| */ |
| |
| void pci_init_board(void) |
| { |
| fsl_pcie_init_board(0); |
| } |
| #endif /* CONFIG_PCI */ |
| |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| |
| FT_FSL_PCI_SETUP; |
| |
| return 0; |
| } |
| #endif |
| |
| void sbc8641d_reset_board (void) |
| { |
| puts ("Resetting board....\n"); |
| } |
| |
| /* |
| * get_board_sys_clk |
| * Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ |
| */ |
| |
| unsigned long get_board_sys_clk (ulong dummy) |
| { |
| int i; |
| ulong val = 0; |
| |
| i = 5; |
| i &= 0x07; |
| |
| switch (i) { |
| case 0: |
| val = 33000000; |
| break; |
| case 1: |
| val = 40000000; |
| break; |
| case 2: |
| val = 50000000; |
| break; |
| case 3: |
| val = 66000000; |
| break; |
| case 4: |
| val = 83000000; |
| break; |
| case 5: |
| val = 100000000; |
| break; |
| case 6: |
| val = 134000000; |
| break; |
| case 7: |
| val = 166000000; |
| break; |
| } |
| |
| return val; |
| } |
| |
| void board_reset(void) |
| { |
| #ifdef CONFIG_SYS_RESET_ADDRESS |
| ulong addr = CONFIG_SYS_RESET_ADDRESS; |
| |
| /* flush and disable I/D cache */ |
| __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); |
| __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); |
| __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4"); |
| __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5"); |
| __asm__ __volatile__ ("sync"); |
| __asm__ __volatile__ ("mtspr 1008, 4"); |
| __asm__ __volatile__ ("isync"); |
| __asm__ __volatile__ ("sync"); |
| __asm__ __volatile__ ("mtspr 1008, 5"); |
| __asm__ __volatile__ ("isync"); |
| __asm__ __volatile__ ("sync"); |
| |
| /* |
| * SRR0 has system reset vector, SRR1 has default MSR value |
| * rfi restores MSR from SRR1 and sets the PC to the SRR0 value |
| */ |
| __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr)); |
| __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4"); |
| __asm__ __volatile__ ("mtspr 27, 4"); |
| __asm__ __volatile__ ("rfi"); |
| #endif |
| } |