blob: a37a087af12ab2bb1131e8c38ff60470b43c372d [file] [log] [blame]
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002
* Gregory E. Allen, gallen@arlut.utexas.edu
* Applied Research Laboratories, The University of Texas at Austin
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc824x.h>
#include <asm/processor.h>
/* ------------------------------------------------------------------------- */
/* NOTE: This describes the proper use of this file.
*
* CONFIG_SYS_CLK_FREQ should be defined as the input frequency on
* PCI_SYNC_IN .
*
* CONFIG_PLL_PCI_TO_MEM_MULTIPLIER is only required on MPC8240
* boards. It should be defined as the PCI to Memory Multiplier as
* documented in the MPC8240 Hardware Specs.
*
* Other mpc824x boards don't need CONFIG_PLL_PCI_TO_MEM_MULTIPLIER
* because they can determine it from the PCR.
*
* Gary Milliorn <gary.milliorn@motorola.com> (who should know since
* he designed the Sandpoint) told us that the PCR is not in all revs
* of the MPC8240 CPU, so it's not guaranteeable and we cannot do
* away with CONFIG_PLL_PCI_TO_MEM_MULTIPLIER altogether.
*/
/* ------------------------------------------------------------------------- */
/* This gives the PCI to Memory multiplier times 10 */
/* The index is the value of PLL_CFG[0:4] */
/* This is documented in the MPC8240/5 Hardware Specs */
short pll_pci_to_mem_multiplier[] = {
#if defined(CONFIG_MPC8240)
30, 30, 10, 10, 20, 10, 0, 10,
10, 0, 20, 0, 20, 0, 20, 0,
30, 0, 15, 0, 20, 0, 20, 0,
25, 0, 10, 0, 15, 15, 0, 0,
#elif defined(CONFIG_MPC8245)
30, 30, 10, 10, 20, 10, 10, 10,
10, 20, 20, 15, 20, 15, 20, 30,
30, 40, 15, 40, 20, 25, 20, 40,
25, 20, 10, 20, 15, 15, 15, 0,
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif
};
#define CU824_PLL_STATE_REG 0xFE80002F
#define PCR 0x800000E2
/* ------------------------------------------------------------------------- */
/* compute the memory bus clock frequency */
ulong get_bus_freq (ulong dummy)
{
unsigned char pll_cfg;
#if defined(CONFIG_MPC8240) && !defined(CONFIG_CU824)
return (CONFIG_SYS_CLK_FREQ) * (CONFIG_PLL_PCI_TO_MEM_MULTIPLIER);
#elif defined(CONFIG_CU824)
pll_cfg = *(volatile unsigned char *) (CU824_PLL_STATE_REG);
pll_cfg &= 0x1f;
#else
CONFIG_READ_BYTE(PCR, pll_cfg);
pll_cfg = (pll_cfg >> 3) & 0x1f;
#endif
return ((CONFIG_SYS_CLK_FREQ) * pll_pci_to_mem_multiplier[pll_cfg] + 5) / 10;
}
/* ------------------------------------------------------------------------- */
/* This gives the Memory to CPU Core multiplier times 10 */
/* The index is the value of PLLRATIO in HID1 */
/* This is documented in the MPC8240 Hardware Specs */
/* This is not documented for MPC8245 ? FIXME */
short pllratio_to_factor[] = {
0, 0, 0, 10, 20, 20, 25, 45,
30, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 10, 0, 0, 0, 45,
30, 0, 40, 0, 0, 0, 35, 0,
};
/* compute the CPU and memory bus clock frequencies */
int get_clocks (void)
{
DECLARE_GLOBAL_DATA_PTR;
uint hid1 = mfspr(HID1);
hid1 = (hid1 >> (32-5)) & 0x1f;
gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5)
/ 10;
gd->bus_clk = get_bus_freq(0);
return (0);
}