| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2016 Texas Instruments, Inc. |
| */ |
| |
| #include <common.h> |
| #include <hang.h> |
| #include <log.h> |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| #include <malloc.h> |
| |
| #include <asm/omap_common.h> |
| #include <asm/arch-omap5/sys_proto.h> |
| |
| #ifdef CONFIG_TI_SECURE_DEVICE |
| |
| /* Give zero values if not already defined */ |
| #ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ |
| #define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0) |
| #endif |
| #ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ |
| #define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0) |
| #endif |
| |
| static u32 hs_irq_skip[] = { |
| 8, /* Secure violation reporting interrupt */ |
| 15, /* One interrupt for SDMA by secure world */ |
| 118 /* One interrupt for Crypto DMA by secure world */ |
| }; |
| |
| static int ft_hs_fixup_crossbar(void *fdt, struct bd_info *bd) |
| { |
| const char *path; |
| int offs; |
| int ret; |
| int len, i, old_cnt, new_cnt; |
| u32 *temp; |
| const u32 *p_data; |
| |
| /* |
| * Increase the size of the fdt |
| * so we have some breathing room |
| */ |
| ret = fdt_increase_size(fdt, 512); |
| if (ret < 0) { |
| printf("Could not increase size of device tree: %s\n", |
| fdt_strerror(ret)); |
| return ret; |
| } |
| |
| /* Reserve IRQs that are used/needed by secure world */ |
| path = "/ocp/crossbar"; |
| offs = fdt_path_offset(fdt, path); |
| if (offs < 0) { |
| debug("Node %s not found.\n", path); |
| return 0; |
| } |
| |
| /* Get current entries */ |
| p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len); |
| if (p_data) |
| old_cnt = len / sizeof(u32); |
| else |
| old_cnt = 0; |
| |
| new_cnt = sizeof(hs_irq_skip) / |
| sizeof(hs_irq_skip[0]); |
| |
| /* Create new/updated skip list for HS parts */ |
| temp = malloc(sizeof(u32) * (old_cnt + new_cnt)); |
| for (i = 0; i < new_cnt; i++) |
| temp[i] = cpu_to_fdt32(hs_irq_skip[i]); |
| for (i = 0; i < old_cnt; i++) |
| temp[i + new_cnt] = p_data[i]; |
| |
| /* Blow away old data and set new data */ |
| fdt_delprop(fdt, offs, "ti,irqs-skip"); |
| ret = fdt_setprop(fdt, offs, "ti,irqs-skip", |
| temp, |
| (old_cnt + new_cnt) * sizeof(u32)); |
| free(temp); |
| |
| /* Check if the update worked */ |
| if (ret < 0) { |
| printf("Could not add ti,irqs-skip property to node %s: %s\n", |
| path, fdt_strerror(ret)); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| #if ((TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ != 0) || \ |
| (CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ != 0)) |
| static int ft_hs_fixup_sram(void *fdt, struct bd_info *bd) |
| { |
| const char *path; |
| int offs; |
| int ret; |
| u32 temp[2]; |
| |
| /* |
| * Update SRAM reservations on secure devices. The OCMC RAM |
| * is always reserved for secure use from the start of that |
| * memory region |
| */ |
| path = "/ocp/ocmcram@40300000/sram-hs"; |
| offs = fdt_path_offset(fdt, path); |
| if (offs < 0) { |
| debug("Node %s not found.\n", path); |
| return 0; |
| } |
| |
| /* relative start offset */ |
| temp[0] = cpu_to_fdt32(0); |
| /* reservation size */ |
| temp[1] = cpu_to_fdt32(max(TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ, |
| CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ)); |
| fdt_delprop(fdt, offs, "reg"); |
| ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32)); |
| if (ret < 0) { |
| printf("Could not add reg property to node %s: %s\n", |
| path, fdt_strerror(ret)); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #else |
| static int ft_hs_fixup_sram(void *fdt, struct bd_info *bd) { return 0; } |
| #endif |
| |
| static void ft_hs_fixups(void *fdt, struct bd_info *bd) |
| { |
| /* Check we are running on an HS/EMU device type */ |
| if (GP_DEVICE != get_device_type()) { |
| if ((ft_hs_fixup_crossbar(fdt, bd) == 0) && |
| (ft_hs_disable_rng(fdt, bd) == 0) && |
| (ft_hs_fixup_sram(fdt, bd) == 0) && |
| (ft_hs_fixup_dram(fdt, bd) == 0) && |
| (ft_hs_add_tee(fdt, bd) == 0)) |
| return; |
| } else { |
| printf("ERROR: Incorrect device type (GP) detected!"); |
| } |
| /* Fixup failed or wrong device type */ |
| hang(); |
| } |
| #else |
| static void ft_hs_fixups(void *fdt, struct bd_info *bd) |
| { |
| } |
| #endif /* #ifdef CONFIG_TI_SECURE_DEVICE */ |
| |
| #if defined(CONFIG_TARGET_DRA7XX_EVM) || defined(CONFIG_TARGET_AM57XX_EVM) |
| #define OPP_DSP_CLK_NUM 3 |
| #define OPP_IVA_CLK_NUM 2 |
| #define OPP_GPU_CLK_NUM 2 |
| |
| const char *dra7_opp_dsp_clk_names[OPP_DSP_CLK_NUM] = { |
| "dpll_dsp_ck", |
| "dpll_dsp_m2_ck", |
| "dpll_dsp_m3x2_ck", |
| }; |
| |
| const char *dra7_opp_iva_clk_names[OPP_IVA_CLK_NUM] = { |
| "dpll_iva_ck", |
| "dpll_iva_m2_ck", |
| }; |
| |
| const char *dra7_opp_gpu_clk_names[OPP_GPU_CLK_NUM] = { |
| "dpll_gpu_ck", |
| "dpll_gpu_m2_ck", |
| }; |
| |
| /* DSPEVE voltage domain */ |
| u32 dra7_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = { |
| {}, /*OPP_LOW */ |
| {600000000, 600000000, 400000000}, /* OPP_NOM */ |
| {700000000, 700000000, 466666667}, /* OPP_OD */ |
| {750000000, 750000000, 500000000}, /* OPP_HIGH */ |
| }; |
| |
| /* DSP clock rates on DRA76x ACD-package based SoCs */ |
| u32 dra76_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = { |
| {}, /* OPP_LOW */ |
| {600000000, 600000000, 400000000}, /* OPP_NOM */ |
| {700000000, 700000000, 466666667}, /* OPP_OD */ |
| {850000000, 850000000, 566666667}, /* OPP_HIGH */ |
| }; |
| |
| /* IVA voltage domain */ |
| u32 dra7_opp_iva_clk_rates[NUM_OPPS][OPP_IVA_CLK_NUM] = { |
| {}, /* OPP_LOW */ |
| {1165000000, 388333334}, /* OPP_NOM */ |
| {860000000, 430000000}, /* OPP_OD */ |
| {1064000000, 532000000}, /* OPP_HIGH */ |
| }; |
| |
| /* GPU voltage domain */ |
| u32 dra7_opp_gpu_clk_rates[NUM_OPPS][OPP_GPU_CLK_NUM] = { |
| {}, /* OPP_LOW */ |
| {1277000000, 425666667}, /* OPP_NOM */ |
| {1000000000, 500000000}, /* OPP_OD */ |
| {1064000000, 532000000}, /* OPP_HIGH */ |
| }; |
| |
| static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num) |
| { |
| int offs, node_offs, ret, i; |
| uint32_t phandle; |
| |
| offs = fdt_path_offset(fdt, "/ocp/interconnect@4a000000/segment@0/target-module@5000/cm_core_aon@0/clocks"); |
| if (offs < 0) |
| offs = fdt_path_offset(fdt, "/ocp/l4@4a000000/cm_core_aon@5000/clocks"); |
| if (offs < 0) { |
| debug("Could not find cm_core_aon clocks node path offset : %s\n", |
| fdt_strerror(offs)); |
| return offs; |
| } |
| |
| for (i = 0; i < num; i++) { |
| node_offs = fdt_subnode_offset(fdt, offs, names[i]); |
| if (node_offs < 0) { |
| debug("Could not find clock sub-node %s: %s\n", |
| names[i], fdt_strerror(node_offs)); |
| return offs; |
| } |
| |
| phandle = fdt_get_phandle(fdt, node_offs); |
| if (!phandle) { |
| debug("Could not find phandle for clock %s\n", |
| names[i]); |
| return -1; |
| } |
| |
| ret = fdt_setprop_u32(fdt, node_offs, "assigned-clocks", |
| phandle); |
| if (ret < 0) { |
| debug("Could not add assigned-clocks property to clock node %s: %s\n", |
| names[i], fdt_strerror(ret)); |
| return ret; |
| } |
| |
| ret = fdt_setprop_u32(fdt, node_offs, "assigned-clock-rates", |
| rates[i]); |
| if (ret < 0) { |
| debug("Could not add assigned-clock-rates property to clock node %s: %s\n", |
| names[i], fdt_strerror(ret)); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void ft_opp_clock_fixups(void *fdt, struct bd_info *bd) |
| { |
| const char **clk_names; |
| u32 *clk_rates; |
| int ret; |
| |
| if (!is_dra72x() && !is_dra7xx()) |
| return; |
| |
| /* fixup DSP clocks */ |
| clk_names = dra7_opp_dsp_clk_names; |
| clk_rates = dra7_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)]; |
| /* adjust for higher OPP_HIGH clock rate on DRA76xP/DRA77xP SoCs */ |
| if (is_dra76x_acd()) |
| clk_rates = dra76_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)]; |
| |
| ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_DSP_CLK_NUM); |
| if (ret) { |
| printf("ft_fixup_clocks failed for DSP voltage domain: %s\n", |
| fdt_strerror(ret)); |
| return; |
| } |
| |
| /* fixup IVA clocks */ |
| clk_names = dra7_opp_iva_clk_names; |
| clk_rates = dra7_opp_iva_clk_rates[get_voltrail_opp(VOLT_IVA)]; |
| ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_IVA_CLK_NUM); |
| if (ret) { |
| printf("ft_fixup_clocks failed for IVA voltage domain: %s\n", |
| fdt_strerror(ret)); |
| return; |
| } |
| |
| /* fixup GPU clocks */ |
| clk_names = dra7_opp_gpu_clk_names; |
| clk_rates = dra7_opp_gpu_clk_rates[get_voltrail_opp(VOLT_GPU)]; |
| ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_GPU_CLK_NUM); |
| if (ret) { |
| printf("ft_fixup_clocks failed for GPU voltage domain: %s\n", |
| fdt_strerror(ret)); |
| return; |
| } |
| } |
| #else |
| static void ft_opp_clock_fixups(void *fdt, struct bd_info *bd) { } |
| #endif /* CONFIG_TARGET_DRA7XX_EVM || CONFIG_TARGET_AM57XX_EVM */ |
| |
| /* |
| * Place for general cpu/SoC FDT fixups. Board specific |
| * fixups should remain in the board files which is where |
| * this function should be called from. |
| */ |
| void ft_cpu_setup(void *fdt, struct bd_info *bd) |
| { |
| ft_hs_fixups(fdt, bd); |
| ft_opp_clock_fixups(fdt, bd); |
| } |