| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2007-2011 Freescale Semiconductor, Inc. |
| * |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| #include <common.h> |
| #include <clock_legacy.h> |
| #include <env.h> |
| #include <log.h> |
| #include <time.h> |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| #include <asm/processor.h> |
| #include <linux/ctype.h> |
| #include <asm/io.h> |
| #include <asm/fsl_fdt.h> |
| #include <asm/fsl_portals.h> |
| #include <fsl_qbman.h> |
| #include <hwconfig.h> |
| #ifdef CONFIG_FSL_ESDHC |
| #include <fsl_esdhc.h> |
| #endif |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| #include <fsl_fman.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| extern void ft_qe_setup(void *blob); |
| extern void ft_fixup_num_cores(void *blob); |
| extern void ft_srio_setup(void *blob); |
| |
| #ifdef CONFIG_MP |
| #include "mp.h" |
| |
| void ft_fixup_cpu(void *blob, u64 memory_limit) |
| { |
| int off; |
| phys_addr_t spin_tbl_addr = get_spin_phys_addr(); |
| u32 bootpg = determine_mp_bootpg(NULL); |
| u32 id = get_my_id(); |
| const char *enable_method; |
| #if defined(T1040_TDM_QUIRK_CCSR_BASE) |
| int ret; |
| int tdm_hwconfig_enabled = 0; |
| char buffer[HWCONFIG_BUFFER_SIZE] = {0}; |
| #endif |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| while (off != -FDT_ERR_NOTFOUND) { |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); |
| |
| if (reg) { |
| u32 phys_cpu_id = thread_to_core(*reg); |
| u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr; |
| val = cpu_to_fdt64(val); |
| if (*reg == id) { |
| fdt_setprop_string(blob, off, "status", |
| "okay"); |
| } else { |
| fdt_setprop_string(blob, off, "status", |
| "disabled"); |
| } |
| |
| if (hold_cores_in_reset(0)) { |
| #ifdef CONFIG_FSL_CORENET |
| /* Cores held in reset, use BRR to release */ |
| enable_method = "fsl,brr-holdoff"; |
| #else |
| /* Cores held in reset, use EEBPCR to release */ |
| enable_method = "fsl,eebpcr-holdoff"; |
| #endif |
| } else { |
| /* Cores out of reset and in a spin-loop */ |
| enable_method = "spin-table"; |
| |
| fdt_setprop(blob, off, "cpu-release-addr", |
| &val, sizeof(val)); |
| } |
| |
| fdt_setprop_string(blob, off, "enable-method", |
| enable_method); |
| } else { |
| printf ("cpu NULL\n"); |
| } |
| off = fdt_node_offset_by_prop_value(blob, off, |
| "device_type", "cpu", 4); |
| } |
| |
| #if defined(T1040_TDM_QUIRK_CCSR_BASE) |
| #define CONFIG_MEM_HOLE_16M 0x1000000 |
| /* |
| * Extract hwconfig from environment. |
| * Search for tdm entry in hwconfig. |
| */ |
| ret = env_get_f("hwconfig", buffer, sizeof(buffer)); |
| if (ret > 0) |
| tdm_hwconfig_enabled = hwconfig_f("tdm", buffer); |
| |
| /* Reserve the memory hole created by TDM LAW, so OSes dont use it */ |
| if (tdm_hwconfig_enabled) { |
| off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE, |
| CONFIG_MEM_HOLE_16M); |
| if (off < 0) |
| printf("Failed to reserve memory for tdm: %s\n", |
| fdt_strerror(off)); |
| } |
| #endif |
| |
| /* Reserve the boot page so OSes dont use it */ |
| if ((u64)bootpg < memory_limit) { |
| off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); |
| if (off < 0) |
| printf("Failed to reserve memory for bootpg: %s\n", |
| fdt_strerror(off)); |
| } |
| |
| #ifndef CONFIG_MPC8xxx_DISABLE_BPTR |
| /* |
| * Reserve the default boot page so OSes dont use it. |
| * The default boot page is always mapped to bootpg above using |
| * boot page translation. |
| */ |
| if (0xfffff000ull < memory_limit) { |
| off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096); |
| if (off < 0) { |
| printf("Failed to reserve memory for 0xfffff000: %s\n", |
| fdt_strerror(off)); |
| } |
| } |
| #endif |
| |
| /* Reserve spin table page */ |
| if (spin_tbl_addr < memory_limit) { |
| off = fdt_add_mem_rsv(blob, |
| (spin_tbl_addr & ~0xffful), 4096); |
| if (off < 0) |
| printf("Failed to reserve memory for spin table: %s\n", |
| fdt_strerror(off)); |
| } |
| #ifdef CONFIG_DEEP_SLEEP |
| #ifdef CONFIG_SPL_MMC_BOOT |
| off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START, |
| CONFIG_SYS_MMC_U_BOOT_SIZE); |
| if (off < 0) |
| printf("Failed to reserve memory for SD deep sleep: %s\n", |
| fdt_strerror(off)); |
| #elif defined(CONFIG_SPL_SPI_BOOT) |
| off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START, |
| CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE); |
| if (off < 0) |
| printf("Failed to reserve memory for SPI deep sleep: %s\n", |
| fdt_strerror(off)); |
| #endif |
| #endif |
| } |
| #endif |
| |
| #ifdef CONFIG_SYS_FSL_CPC |
| static inline void ft_fixup_l3cache(void *blob, int off) |
| { |
| u32 line_size, num_ways, size, num_sets; |
| cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR; |
| u32 cfg0 = in_be32(&cpc->cpccfg0); |
| |
| size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC; |
| num_ways = CPC_CFG0_NUM_WAYS(cfg0); |
| line_size = CPC_CFG0_LINE_SZ(cfg0); |
| num_sets = size / (line_size * num_ways); |
| |
| fdt_setprop(blob, off, "cache-unified", NULL, 0); |
| fdt_setprop_cell(blob, off, "cache-block-size", line_size); |
| fdt_setprop_cell(blob, off, "cache-size", size); |
| fdt_setprop_cell(blob, off, "cache-sets", num_sets); |
| fdt_setprop_cell(blob, off, "cache-level", 3); |
| #ifdef CONFIG_SYS_CACHE_STASHING |
| fdt_setprop_cell(blob, off, "cache-stash-id", 1); |
| #endif |
| } |
| #else |
| #define ft_fixup_l3cache(x, y) |
| #endif |
| |
| #if defined(CONFIG_L2_CACHE) || \ |
| defined(CONFIG_BACKSIDE_L2_CACHE) || \ |
| defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) |
| static inline void ft_fixup_l2cache_compatible(void *blob, int off) |
| { |
| int len; |
| struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); |
| |
| if (cpu) { |
| char buf[40]; |
| |
| if (isdigit(cpu->name[0])) { |
| /* MPCxxxx, where xxxx == 4-digit number */ |
| len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", |
| cpu->name) + 1; |
| } else { |
| /* Pxxxx or Txxxx, where xxxx == 4-digit number */ |
| len = sprintf(buf, "fsl,%c%s-l2-cache-controller", |
| tolower(cpu->name[0]), cpu->name + 1) + 1; |
| } |
| |
| /* |
| * append "cache" after the NULL character that the previous |
| * sprintf wrote. This is how a device tree stores multiple |
| * strings in a property. |
| */ |
| len += sprintf(buf + len, "cache") + 1; |
| |
| fdt_setprop(blob, off, "compatible", buf, len); |
| } |
| } |
| #endif |
| |
| #if defined(CONFIG_L2_CACHE) |
| /* return size in kilobytes */ |
| static inline u32 l2cache_size(void) |
| { |
| volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; |
| volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3; |
| u32 ver = SVR_SOC_VER(get_svr()); |
| |
| switch (l2siz_field) { |
| case 0x0: |
| break; |
| case 0x1: |
| if (ver == SVR_8540 || ver == SVR_8560 || |
| ver == SVR_8541 || ver == SVR_8555) |
| return 128; |
| else |
| return 256; |
| break; |
| case 0x2: |
| if (ver == SVR_8540 || ver == SVR_8560 || |
| ver == SVR_8541 || ver == SVR_8555) |
| return 256; |
| else |
| return 512; |
| break; |
| case 0x3: |
| return 1024; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static inline void ft_fixup_l2cache(void *blob) |
| { |
| int off; |
| u32 *ph; |
| |
| const u32 line_size = 32; |
| const u32 num_ways = 8; |
| const u32 size = l2cache_size() * 1024; |
| const u32 num_sets = size / (line_size * num_ways); |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| if (off < 0) { |
| debug("no cpu node fount\n"); |
| return; |
| } |
| |
| ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); |
| |
| if (ph == NULL) { |
| debug("no next-level-cache property\n"); |
| return ; |
| } |
| |
| off = fdt_node_offset_by_phandle(blob, *ph); |
| if (off < 0) { |
| printf("%s: %s\n", __func__, fdt_strerror(off)); |
| return ; |
| } |
| |
| ft_fixup_l2cache_compatible(blob, off); |
| fdt_setprop(blob, off, "cache-unified", NULL, 0); |
| fdt_setprop_cell(blob, off, "cache-block-size", line_size); |
| fdt_setprop_cell(blob, off, "cache-size", size); |
| fdt_setprop_cell(blob, off, "cache-sets", num_sets); |
| fdt_setprop_cell(blob, off, "cache-level", 2); |
| |
| /* we dont bother w/L3 since no platform of this type has one */ |
| } |
| #elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ |
| defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) |
| static inline void ft_fixup_l2cache(void *blob) |
| { |
| int off, l2_off, l3_off = -1; |
| u32 *ph; |
| #ifdef CONFIG_BACKSIDE_L2_CACHE |
| u32 l2cfg0 = mfspr(SPRN_L2CFG0); |
| #else |
| struct ccsr_cluster_l2 *l2cache = |
| (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); |
| u32 l2cfg0 = in_be32(&l2cache->l2cfg0); |
| #endif |
| u32 size, line_size, num_ways, num_sets; |
| int has_l2 = 1; |
| |
| /* P2040/P2040E has no L2, so dont set any L2 props */ |
| if (SVR_SOC_VER(get_svr()) == SVR_P2040) |
| has_l2 = 0; |
| |
| size = (l2cfg0 & 0x3fff) * 64 * 1024; |
| num_ways = ((l2cfg0 >> 14) & 0x1f) + 1; |
| line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32; |
| num_sets = size / (line_size * num_ways); |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| |
| while (off != -FDT_ERR_NOTFOUND) { |
| ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); |
| |
| if (ph == NULL) { |
| debug("no next-level-cache property\n"); |
| goto next; |
| } |
| |
| l2_off = fdt_node_offset_by_phandle(blob, *ph); |
| if (l2_off < 0) { |
| printf("%s: %s\n", __func__, fdt_strerror(off)); |
| goto next; |
| } |
| |
| if (has_l2) { |
| #ifdef CONFIG_SYS_CACHE_STASHING |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); |
| #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500) |
| /* Only initialize every eighth thread */ |
| if (reg && !((*reg) % 8)) { |
| fdt_setprop_cell(blob, l2_off, "cache-stash-id", |
| (*reg / 4) + 32 + 1); |
| } |
| #else |
| if (reg) { |
| fdt_setprop_cell(blob, l2_off, "cache-stash-id", |
| (*reg * 2) + 32 + 1); |
| } |
| #endif |
| #endif |
| |
| fdt_setprop(blob, l2_off, "cache-unified", NULL, 0); |
| fdt_setprop_cell(blob, l2_off, "cache-block-size", |
| line_size); |
| fdt_setprop_cell(blob, l2_off, "cache-size", size); |
| fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets); |
| fdt_setprop_cell(blob, l2_off, "cache-level", 2); |
| ft_fixup_l2cache_compatible(blob, l2_off); |
| } |
| |
| if (l3_off < 0) { |
| ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0); |
| |
| if (ph == NULL) { |
| debug("no next-level-cache property\n"); |
| goto next; |
| } |
| l3_off = *ph; |
| } |
| next: |
| off = fdt_node_offset_by_prop_value(blob, off, |
| "device_type", "cpu", 4); |
| } |
| if (l3_off > 0) { |
| l3_off = fdt_node_offset_by_phandle(blob, l3_off); |
| if (l3_off < 0) { |
| printf("%s: %s\n", __func__, fdt_strerror(off)); |
| return ; |
| } |
| ft_fixup_l3cache(blob, l3_off); |
| } |
| } |
| #else |
| #define ft_fixup_l2cache(x) |
| #endif |
| |
| static inline void ft_fixup_cache(void *blob) |
| { |
| int off; |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| |
| while (off != -FDT_ERR_NOTFOUND) { |
| u32 l1cfg0 = mfspr(SPRN_L1CFG0); |
| u32 l1cfg1 = mfspr(SPRN_L1CFG1); |
| u32 isize, iline_size, inum_sets, inum_ways; |
| u32 dsize, dline_size, dnum_sets, dnum_ways; |
| |
| /* d-side config */ |
| dsize = (l1cfg0 & 0x7ff) * 1024; |
| dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1; |
| dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32; |
| dnum_sets = dsize / (dline_size * dnum_ways); |
| |
| fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size); |
| fdt_setprop_cell(blob, off, "d-cache-size", dsize); |
| fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets); |
| |
| #ifdef CONFIG_SYS_CACHE_STASHING |
| { |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); |
| if (reg) |
| fdt_setprop_cell(blob, off, "cache-stash-id", |
| (*reg * 2) + 32 + 0); |
| } |
| #endif |
| |
| /* i-side config */ |
| isize = (l1cfg1 & 0x7ff) * 1024; |
| inum_ways = ((l1cfg1 >> 11) & 0xff) + 1; |
| iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32; |
| inum_sets = isize / (iline_size * inum_ways); |
| |
| fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size); |
| fdt_setprop_cell(blob, off, "i-cache-size", isize); |
| fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets); |
| |
| off = fdt_node_offset_by_prop_value(blob, off, |
| "device_type", "cpu", 4); |
| } |
| |
| ft_fixup_l2cache(blob); |
| } |
| |
| |
| void fdt_add_enet_stashing(void *fdt) |
| { |
| do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1); |
| |
| do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1); |
| |
| do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1); |
| do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1); |
| do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1); |
| do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1); |
| } |
| |
| #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| static void ft_fixup_clks(void *blob, const char *compat, u32 offset, |
| unsigned long freq) |
| { |
| phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS; |
| int off = fdt_node_offset_by_compat_reg(blob, compat, phys); |
| |
| if (off >= 0) { |
| off = fdt_setprop_cell(blob, off, "clock-frequency", freq); |
| if (off > 0) |
| printf("WARNING enable to set clock-frequency " |
| "for %s: %s\n", compat, fdt_strerror(off)); |
| } |
| } |
| #endif |
| |
| static void ft_fixup_dpaa_clks(void *blob) |
| { |
| sys_info_t sysinfo; |
| |
| get_sys_info(&sysinfo); |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, |
| sysinfo.freq_fman[0]); |
| |
| #if (CONFIG_SYS_NUM_FMAN == 2) |
| ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, |
| sysinfo.freq_fman[1]); |
| #endif |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_QBMAN |
| do_fixup_by_compat_u32(blob, "fsl,qman", |
| "clock-frequency", sysinfo.freq_qman, 1); |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_PME |
| do_fixup_by_compat_u32(blob, "fsl,pme", |
| "clock-frequency", sysinfo.freq_pme, 1); |
| #endif |
| } |
| #else |
| #define ft_fixup_dpaa_clks(x) |
| #endif |
| |
| #ifdef CONFIG_QE |
| static void ft_fixup_qe_snum(void *blob) |
| { |
| unsigned int svr; |
| |
| svr = mfspr(SPRN_SVR); |
| if (SVR_SOC_VER(svr) == SVR_8569) { |
| if(IS_SVR_REV(svr, 1, 0)) |
| do_fixup_by_compat_u32(blob, "fsl,qe", |
| "fsl,qe-num-snums", 46, 1); |
| else |
| do_fixup_by_compat_u32(blob, "fsl,qe", |
| "fsl,qe-num-snums", 76, 1); |
| } |
| } |
| #endif |
| |
| #if defined(CONFIG_ARCH_P4080) |
| static void fdt_fixup_usb(void *fdt) |
| { |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 rcwsr11 = in_be32(&gur->rcwsr[11]); |
| int off; |
| |
| off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph"); |
| if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) != |
| FSL_CORENET_RCWSR11_EC1_FM1_USB1) |
| fdt_status_disabled(fdt, off); |
| |
| off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr"); |
| if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) != |
| FSL_CORENET_RCWSR11_EC2_USB2) |
| fdt_status_disabled(fdt, off); |
| } |
| #else |
| #define fdt_fixup_usb(x) |
| #endif |
| |
| #if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240) || \ |
| defined(CONFIG_ARCH_T4160) |
| void fdt_fixup_dma3(void *blob) |
| { |
| /* the 3rd DMA is not functional if SRIO2 is chosen */ |
| int nodeoff; |
| ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| |
| #define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300) |
| #if defined(CONFIG_ARCH_T2080) |
| u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & |
| FSL_CORENET2_RCWSR4_SRDS2_PRTCL; |
| srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; |
| |
| switch (srds_prtcl_s2) { |
| case 0x29: |
| case 0x2d: |
| case 0x2e: |
| #elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) |
| u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & |
| FSL_CORENET2_RCWSR4_SRDS4_PRTCL; |
| srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; |
| |
| switch (srds_prtcl_s4) { |
| case 6: |
| case 8: |
| case 14: |
| case 16: |
| #endif |
| nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma", |
| CONFIG_SYS_ELO3_DMA3); |
| if (nodeoff > 0) |
| fdt_status_disabled(blob, nodeoff); |
| else |
| printf("WARNING: unable to disable dma3\n"); |
| break; |
| default: |
| break; |
| } |
| } |
| #else |
| #define fdt_fixup_dma3(x) |
| #endif |
| |
| #if defined(CONFIG_ARCH_T1040) |
| static void fdt_fixup_l2_switch(void *blob) |
| { |
| uchar l2swaddr[6]; |
| int node; |
| |
| /* The l2switch node from device-tree has |
| * compatible string "vitesse-9953" */ |
| node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953"); |
| if (node == -FDT_ERR_NOTFOUND) |
| /* no l2switch node has been found */ |
| return; |
| |
| /* Get MAC address for the l2switch from "l2switchaddr"*/ |
| if (!eth_env_get_enetaddr("l2switchaddr", l2swaddr)) { |
| printf("Warning: MAC address for l2switch not found\n"); |
| memset(l2swaddr, 0, sizeof(l2swaddr)); |
| } |
| |
| /* Add MAC address to l2switch node */ |
| fdt_setprop(blob, node, "local-mac-address", l2swaddr, |
| sizeof(l2swaddr)); |
| } |
| #else |
| #define fdt_fixup_l2_switch(x) |
| #endif |
| |
| void ft_cpu_setup(void *blob, struct bd_info *bd) |
| { |
| int off; |
| int val; |
| int len; |
| sys_info_t sysinfo; |
| |
| /* delete crypto node if not on an E-processor */ |
| if (!IS_E_PROCESSOR(get_svr())) |
| fdt_fixup_crypto_node(blob, 0); |
| #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 |
| else { |
| ccsr_sec_t __iomem *sec; |
| |
| sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; |
| fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); |
| } |
| #endif |
| |
| fdt_add_enet_stashing(blob); |
| |
| #ifndef CONFIG_FSL_TBCLK_EXTRA_DIV |
| #define CONFIG_FSL_TBCLK_EXTRA_DIV 1 |
| #endif |
| do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, |
| "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, |
| 1); |
| do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, |
| "bus-frequency", bd->bi_busfreq, 1); |
| get_sys_info(&sysinfo); |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| while (off != -FDT_ERR_NOTFOUND) { |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len); |
| val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]); |
| fdt_setprop(blob, off, "clock-frequency", &val, 4); |
| off = fdt_node_offset_by_prop_value(blob, off, "device_type", |
| "cpu", 4); |
| } |
| do_fixup_by_prop_u32(blob, "device_type", "soc", 4, |
| "bus-frequency", bd->bi_busfreq, 1); |
| |
| #ifdef CONFIG_QE |
| ft_qe_setup(blob); |
| ft_fixup_qe_snum(blob); |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| fdt_fixup_fman_firmware(blob); |
| #endif |
| |
| #ifdef CONFIG_SYS_NS16550 |
| do_fixup_by_compat_u32(blob, "ns16550", |
| "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); |
| #endif |
| |
| #ifdef CONFIG_CPM2 |
| do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart", |
| "current-speed", gd->baudrate, 1); |
| |
| do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", |
| "clock-frequency", bd->bi_brgfreq, 1); |
| #endif |
| |
| #ifdef CONFIG_FSL_CORENET |
| do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0", |
| "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); |
| do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0", |
| "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); |
| do_fixup_by_compat_u32(blob, "fsl,mpic", |
| "clock-frequency", get_bus_freq(0)/2, 1); |
| #else |
| do_fixup_by_compat_u32(blob, "fsl,mpic", |
| "clock-frequency", get_bus_freq(0), 1); |
| #endif |
| |
| fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); |
| |
| #ifdef CONFIG_MP |
| ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize); |
| ft_fixup_num_cores(blob); |
| #endif |
| |
| ft_fixup_cache(blob); |
| |
| #if defined(CONFIG_FSL_ESDHC) |
| fdt_fixup_esdhc(blob, bd); |
| #endif |
| |
| ft_fixup_dpaa_clks(blob); |
| |
| #if defined(CONFIG_SYS_BMAN_MEM_PHYS) |
| fdt_portal(blob, "fsl,bman-portal", "bman-portals", |
| (u64)CONFIG_SYS_BMAN_MEM_PHYS, |
| CONFIG_SYS_BMAN_MEM_SIZE); |
| fdt_fixup_bportals(blob); |
| #endif |
| |
| #if defined(CONFIG_SYS_QMAN_MEM_PHYS) |
| fdt_portal(blob, "fsl,qman-portal", "qman-portals", |
| (u64)CONFIG_SYS_QMAN_MEM_PHYS, |
| CONFIG_SYS_QMAN_MEM_SIZE); |
| |
| fdt_fixup_qportals(blob); |
| #endif |
| |
| #ifdef CONFIG_SYS_SRIO |
| ft_srio_setup(blob); |
| #endif |
| |
| /* |
| * system-clock = CCB clock/2 |
| * Here gd->bus_clk = CCB clock |
| * We are using the system clock as 1588 Timer reference |
| * clock source select |
| */ |
| do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", |
| "timer-frequency", gd->bus_clk/2, 1); |
| |
| /* |
| * clock-freq should change to clock-frequency and |
| * flexcan-v1.0 should change to p1010-flexcan respectively |
| * in the future. |
| */ |
| do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", |
| "clock_freq", gd->bus_clk/2, 1); |
| |
| do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", |
| "clock-frequency", gd->bus_clk/2, 1); |
| |
| do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan", |
| "clock-frequency", gd->bus_clk/2, 1); |
| |
| fdt_fixup_usb(blob); |
| |
| fdt_fixup_l2_switch(blob); |
| |
| fdt_fixup_dma3(blob); |
| } |
| |
| /* |
| * For some CCSR devices, we only have the virtual address, not the physical |
| * address. This is because we map CCSR as a whole, so we typically don't need |
| * a macro for the physical address of any device within CCSR. In this case, |
| * we calculate the physical address of that device using it's the difference |
| * between the virtual address of the device and the virtual address of the |
| * beginning of CCSR. |
| */ |
| #define CCSR_VIRT_TO_PHYS(x) \ |
| (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR)) |
| |
| static void msg(const char *name, uint64_t uaddr, uint64_t daddr) |
| { |
| printf("Warning: U-Boot configured %s at address %llx,\n" |
| "but the device tree has it at %llx\n", name, uaddr, daddr); |
| } |
| |
| /* |
| * Verify the device tree |
| * |
| * This function compares several CONFIG_xxx macros that contain physical |
| * addresses with the corresponding nodes in the device tree, to see if |
| * the physical addresses are all correct. For example, if |
| * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address |
| * of the first UART. We convert this to a physical address and compare |
| * that with the physical address of the first ns16550-compatible node |
| * in the device tree. If they don't match, then we display a warning. |
| * |
| * Returns 1 on success, 0 on failure |
| */ |
| int ft_verify_fdt(void *fdt) |
| { |
| uint64_t addr = 0; |
| int aliases; |
| int off; |
| |
| /* First check the CCSR base address */ |
| off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4); |
| if (off > 0) { |
| int size; |
| u32 naddr; |
| const fdt32_t *prop; |
| |
| naddr = fdt_address_cells(fdt, off); |
| prop = fdt_getprop(fdt, off, "ranges", &size); |
| addr = fdt_translate_address(fdt, off, prop + naddr); |
| } |
| |
| if (!addr) { |
| printf("Warning: could not determine base CCSR address in " |
| "device tree\n"); |
| /* No point in checking anything else */ |
| return 0; |
| } |
| |
| if (addr != CONFIG_SYS_CCSRBAR_PHYS) { |
| msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr); |
| /* No point in checking anything else */ |
| return 0; |
| } |
| |
| /* |
| * Check some nodes via aliases. We assume that U-Boot and the device |
| * tree enumerate the devices equally. E.g. the first serial port in |
| * U-Boot is the same as "serial0" in the device tree. |
| */ |
| aliases = fdt_path_offset(fdt, "/aliases"); |
| if (aliases > 0) { |
| #ifdef CONFIG_SYS_NS16550_COM1 |
| if (!fdt_verify_alias_address(fdt, aliases, "serial0", |
| CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1))) |
| return 0; |
| #endif |
| |
| #ifdef CONFIG_SYS_NS16550_COM2 |
| if (!fdt_verify_alias_address(fdt, aliases, "serial1", |
| CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2))) |
| return 0; |
| #endif |
| } |
| |
| /* |
| * The localbus node is typically a root node, even though the lbc |
| * controller is part of CCSR. If we were to put the lbc node under |
| * the SOC node, then the 'ranges' property in the lbc node would |
| * translate through the 'ranges' property of the parent SOC node, and |
| * we don't want that. Since it's a separate node, it's possible for |
| * the 'reg' property to be wrong, so check it here. For now, we |
| * only check for "fsl,elbc" nodes. |
| */ |
| #ifdef CONFIG_SYS_LBC_ADDR |
| off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc"); |
| if (off > 0) { |
| const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL); |
| if (reg) { |
| uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR); |
| |
| addr = fdt_translate_address(fdt, off, reg); |
| if (uaddr != addr) { |
| msg("the localbus", uaddr, addr); |
| return 0; |
| } |
| } |
| } |
| #endif |
| |
| return 1; |
| } |
| |
| void fdt_del_diu(void *blob) |
| { |
| int nodeoff = 0; |
| |
| while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, |
| "fsl,diu")) >= 0) { |
| fdt_del_node(blob, nodeoff); |
| } |
| } |