blob: 04f657947a6bbf152ce2dae2d3fb4218bf26fa5f [file] [log] [blame]
/*
* Lowlevel setup for SMDKV310 board based on S5PC210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
/*
* Register usages:
*
* r5 has zero always
* r7 has GPIO part1 base 0x11400000
* r6 has GPIO part2 base 0x11000000
*/
#define MEM_DLLl_ON
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
push {lr}
/* r5 has always zero */
mov r5, #0
ldr r7, =S5PC210_GPIO_PART1_BASE
ldr r6, =S5PC210_GPIO_PART2_BASE
/* check reset status */
ldr r0, =(S5PC210_POWER_BASE + 0x81C) @ INFORM7
ldr r1, [r0]
/* AFTR wakeup reset */
ldr r2, =S5P_CHECK_DIDLE
cmp r1, r2
beq exit_wakeup
/* Sleep wakeup reset */
ldr r2, =S5P_CHECK_SLEEP
cmp r1, r2
beq wakeup_reset
/*
* If U-boot is already running in ram, no need to relocate U-Boot.
* Memory controller must be configured before relocating U-Boot
* in ram.
*/
ldr r0, =0x00ffffff /* r0 <- Mask Bits*/
bic r1, pc, r0 /* pc <- current addr of code */
/* r1 <- unmasked bits of pc */
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
cmp r1, r2 /* compare r1, r2 */
beq 1f /* r0 == r1 then skip sdram init */
/* init system clock */
bl system_clock_init
/* Memory initialize */
bl mem_ctrl_asm_init
1:
/* for UART */
bl uart_asm_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
bl tzpc_init
exit_wakeup:
/* Load return address and jump to kernel */
ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0
/* r1 = physical address of s5pc210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
mov pc, r1
nop
nop
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
system_clock_init:
push {lr}
ldr r0, =S5PC210_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
ldr r2, =0x14200 @CLK_SRC_CPU
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
2: subs r1, r1, #1
bne 2b
ldr r1, =0x00
ldr r2, =0x0C210 @CLK_SRC_TOP0
str r1, [r0, r2]
ldr r1, =0x00
ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET
str r1, [r0, r2]
/* DMC */
ldr r1, =0x00
ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET
str r1, [r0, r2]
/*CLK_SRC_LEFTBUS */
ldr r1, =0x00
ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET
str r1, [r0, r2]
/*CLK_SRC_RIGHTBUS */
ldr r1, =0x00
ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
ldr r1, =0x066666
ldr r2, =0x0C240 @ CLK_SRC_FSYS
str r1, [r0, r2]
/* UART[0:4], PWM: SCLKMPLL(6) */
ldr r1, =0x06666666
ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
3: subs r1, r1, #1
bne 3b
/*
* CLK_DIV_CPU0:
*
* PCLK_DBG_RATIO[20] 0x1
* ATB_RATIO[16] 0x3
* PERIPH_RATIO[12] 0x3
* COREM1_RATIO[8] 0x7
* COREM0_RATIO[4] 0x3
*/
ldr r1, =0x0133730
ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET
str r1, [r0, r2]
/* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */
ldr r1, =0x03
ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_DMC0:
*
* CORE_TIMERS_RATIO[28] 0x1
* COPY2_RATIO[24] 0x3
* DMCP_RATIO[20] 0x1
* DMCD_RATIO[16] 0x1
* DMC_RATIO[12] 0x1
* DPHY_RATIO[8] 0x1
* ACP_PCLK_RATIO[4] 0x1
* ACP_RATIO[0] 0x3
*/
ldr r1, =0x13111113
ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_DMC1:
*
* DPM_RATIO[24] 0x1
* DVSEM_RATIO[16] 0x1
* PWI_RATIO[8] 0x1
*/
ldr r1, =0x01010100
ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_LEFRBUS:
*
* GPL_RATIO[4] 0x1
* GDL_RATIO[0] 0x3
*/
ldr r1, =0x013
ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_RIGHTBUS:
*
* GPR_RATIO[4] 0x1
* GDR_RATIO[0] 0x3
*/
ldr r1, =0x013
ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_TOP:
*
* ONENAND_RATIO[16] 0x0
* ACLK_133_RATIO[12] 0x5
* ACLK_160_RATIO[8] 0x4
* ACLK_100_RATIO[4] 0x7
* ACLK_200_RATIO[0] 0x3
*/
ldr r1, =0x05473
ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET
str r1, [r0, r2]
/* MMC[0:1] */
ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C544 @ CLK_DIV_FSYS1
str r1, [r0, r2]
/* MMC[2:3] */
ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C548 @ CLK_DIV_FSYS2
str r1, [r0, r2]
/* MMC4 */
ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C54C @ CLK_DIV_FSYS3
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
4: subs r1, r1, #1
bne 4b
/*
* CLK_DIV_PERIL0:
*
* UART5_RATIO[20] 8
* UART4_RATIO[16] 8
* UART3_RATIO[12] 8
* UART2_RATIO[8] 8
* UART1_RATIO[4] 8
* UART0_RATIO[0] 8
*/
ldr r1, =0x774777
ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
/* SLIMBUS: ???, PWM */
ldr r1, =0x8
ldr r2, =0x0C55C @ CLK_DIV_PERIL3
str r1, [r0, r2]
/* Set PLL locktime */
ldr r1, =0x01C20
ldr r2, =0x014000 @APLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x014008 @MPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x0C010 @EPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x0C020 @VPLL_LOCK_OFFSET
str r1, [r0, r2]
/*
* APLL_CON1:
*
* APLL_AFC_ENB[31] 0x1
* APLL_AFC[0] 0xC
*/
ldr r1, =0x8000000C
ldr r2, =0x014104 @APLL_CON1_OFFSET
str r1, [r0, r2]
/*
* APLL_CON0:
*
* APLL_MDIV[16] 0xFA
* APLL_PDIV[8] 0x6
* APLL_SDIV[0] 0x1
*/
ldr r1, =0x80FA0601
ldr r2, =0x014100 @APLL_CON0_OFFSET
str r1, [r0, r2]
/*
* MPLL_CON1:
*
* MPLL_AFC_ENB[31] 0x1
* MPLL_AFC[0] 0x1C
*/
ldr r1, =0x0000001C
ldr r2, =0x01410C @MPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* MPLL_CON0:
*
* MPLL_MDIV[16] 0xC8
* MPLL_PDIV[8] 0x6
* MPLL_SDIV[0] 0x1
*/
ldr r1, =0x80C80601
ldr r2, =0x014108 @MPLL_CON0_OFFSET
str r1, [r0, r2]
/* EPLL */
ldr r1, =0x0
ldr r2, =0x0C114 @EPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* EPLL_CON0:
*
* EPLL_MDIV[16] 0x30
* EPLL_PDIV[8] 0x3
* EPLL_SDIV[0] 0x2
*/
ldr r1, =0x80300302
ldr r2, =0x0C110 @EPLL_CON0_OFFSET
str r1, [r0, r2]
/*
* VPLL_CON1:
*
* VPLL_MRR[24] 0x11
* VPLL_MFR[16] 0x0
* VPLL_K[0] 0x400
*/
ldr r1, =0x11000400
ldr r2, =0x0C124 @VPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* VPLL_CON0:
*
* VPLL_MDIV[16] 0x35
* VPLL_PDIV[8] 0x3
* VPLL_SDIV[0] 0x2
*/
ldr r1, =0x80350302
ldr r2, =0x0C120 @VPLL_CON0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x30000
3: subs r1, r1, #1
bne 3b
pop {pc}
/*
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
* void uart_asm_init(void)
*/
.globl uart_asm_init
uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =0x22222222
str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
ldr r1, =0x00222222
str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
ldr r0, =S5PC210_UART_BASE
add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
ldr r1, =0x3C5
str r1, [r0, #0x4]
ldr r1, =0x111
str r1, [r0, #0x8]
ldr r1, =0x3
str r1, [r0, #0x0]
ldr r1, =0x35
str r1, [r0, #0x28]
ldr r1, =0x4
str r1, [r0, #0x2c]
mov pc, lr
nop
nop
nop
/* Setting TZPC[TrustZone Protection Controller] */
tzpc_init:
ldr r0, =0x10110000
mov r1, #0x0
str r1, [r0]
mov r1, #0xff
str r1, [r0, #0x0804]
str r1, [r0, #0x0810]
str r1, [r0, #0x081C]
str r1, [r0, #0x0828]
ldr r0, =0x10120000
mov r1, #0x0
str r1, [r0]
mov r1, #0xff
str r1, [r0, #0x0804]
str r1, [r0, #0x0810]
str r1, [r0, #0x081C]
str r1, [r0, #0x0828]
ldr r0, =0x10130000
mov r1, #0x0
str r1, [r0]
mov r1, #0xff
str r1, [r0, #0x0804]
str r1, [r0, #0x0810]
str r1, [r0, #0x081C]
str r1, [r0, #0x0828]
ldr r0, =0x10140000
mov r1, #0x0
str r1, [r0]
mov r1, #0xff
str r1, [r0, #0x0804]
str r1, [r0, #0x0810]
str r1, [r0, #0x081C]
str r1, [r0, #0x0828]
ldr r0, =0x10150000
mov r1, #0x0
str r1, [r0]
mov r1, #0xff
str r1, [r0, #0x0804]
str r1, [r0, #0x0810]
str r1, [r0, #0x081C]
str r1, [r0, #0x0828]
ldr r0, =0x10160000
mov r1, #0x0
str r1, [r0]
mov r1, #0xff
str r1, [r0, #0x0804]
str r1, [r0, #0x0810]
str r1, [r0, #0x081C]
str r1, [r0, #0x0828]
mov pc, lr