blob: 236ec8157995b6d4317aba3597ac48a0ff184d09 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
* (C) Copyright 2018 Neil Armstrong <narmstrong@baylibre.com>
*/
#include <common.h>
#include <init.h>
#include <net.h>
#include <asm/arch/boot.h>
#include <asm/arch/eth.h>
#include <asm/arch/axg.h>
#include <asm/arch/mem.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/armv8/mmu.h>
#include <linux/sizes.h>
#include <usb.h>
#include <linux/usb/otg.h>
#include <asm/arch/usb-gx.h>
#include <usb/dwc2_udc.h>
#include <clk.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
int meson_get_boot_device(void)
{
return readl(AXG_AO_SEC_GP_CFG0) & AXG_AO_BOOT_DEVICE;
}
/* Configure the reserved memory zones exported by the secure registers
* into EFI and DTB reserved memory entries.
*/
void meson_init_reserved_memory(void *fdt)
{
u64 bl31_size, bl31_start;
u64 bl32_size, bl32_start;
u32 reg;
/*
* Get ARM Trusted Firmware reserved memory zones in :
* - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
* - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
* - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
*/
reg = readl(AXG_AO_SEC_GP_CFG3);
bl31_size = ((reg & AXG_AO_BL31_RSVMEM_SIZE_MASK)
>> AXG_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
bl32_size = (reg & AXG_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
bl31_start = readl(AXG_AO_SEC_GP_CFG5);
bl32_start = readl(AXG_AO_SEC_GP_CFG4);
/* Add BL31 reserved zone */
if (bl31_start && bl31_size)
meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
/* Add BL32 reserved zone */
if (bl32_start && bl32_size)
meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
}
phys_size_t get_effective_memsize(void)
{
/* Size is reported in MiB, convert it in bytes */
return ((readl(AXG_AO_SEC_GP_CFG0) & AXG_AO_MEM_SIZE_MASK)
>> AXG_AO_MEM_SIZE_SHIFT) * SZ_1M;
}
static struct mm_region axg_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
.size = 0x80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
.virt = 0xf0000000UL,
.phys = 0xf0000000UL,
.size = 0x10000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = axg_mem_map;
#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
static struct dwc2_plat_otg_data meson_gx_dwc2_data;
int board_usb_init(int index, enum usb_init_type init)
{
struct fdtdec_phandle_args args;
const void *blob = gd->fdt_blob;
int node, dwc2_node;
struct udevice *dev, *clk_dev;
struct clk clk;
int ret;
/* find the usb glue node */
node = fdt_node_offset_by_compatible(blob, -1,
"amlogic,meson-axg-usb-ctrl");
if (node < 0) {
debug("Not found usb-control node\n");
return -ENODEV;
}
if (!fdtdec_get_is_enabled(blob, node)) {
debug("usb is disabled in the device tree\n");
return -ENODEV;
}
ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
if (ret) {
debug("Not found usb-control device\n");
return ret;
}
/* find the dwc2 node */
dwc2_node = fdt_node_offset_by_compatible(blob, node,
"amlogic,meson-g12a-usb");
if (dwc2_node < 0) {
debug("Not found dwc2 node\n");
return -ENODEV;
}
if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
debug("dwc2 is disabled in the device tree\n");
return -ENODEV;
}
meson_gx_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
debug("usbotg: can't get base address\n");
return -ENODATA;
}
/* Enable clock */
ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks",
"#clock-cells", 0, 0, &args);
if (ret) {
debug("usbotg has no clocks defined in the device tree\n");
return ret;
}
ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev);
if (ret)
return ret;
if (args.args_count != 1) {
debug("Can't find clock ID in the device tree\n");
return -ENODATA;
}
clk.dev = clk_dev;
clk.id = args.args[0];
ret = clk_enable(&clk);
if (ret) {
debug("Failed to enable usbotg clock\n");
return ret;
}
meson_gx_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
"g-rx-fifo-size", 0);
meson_gx_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
"g-np-tx-fifo-size", 0);
meson_gx_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
"g-tx-fifo-size", 0);
/* Switch to peripheral mode */
ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_PERIPHERAL);
if (ret)
return ret;
return dwc2_udc_probe(&meson_gx_dwc2_data);
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
const void *blob = gd->fdt_blob;
struct udevice *dev;
int node;
int ret;
/* find the usb glue node */
node = fdt_node_offset_by_compatible(blob, -1,
"amlogic,meson-axg-usb-ctrl");
if (node < 0) {
debug("Not found usb-control node\n");
return -ENODEV;
}
if (!fdtdec_get_is_enabled(blob, node))
return -ENODEV;
ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
if (ret)
return ret;
/* Switch to OTG mode */
ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_HOST);
if (ret)
return ret;
return 0;
}
#endif