board/sbc8548/sbc8548.c - platform/external/u-boot - Gitiles

 /*
  * Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com>
  *
  * Copyright 2007 Embedded Specialties, Inc.
  *
  * Copyright 2004, 2007 Freescale Semiconductor.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <spd_sdram.h>
 #include <netdev.h>
 #include <tsec.h>
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>

 DECLARE_GLOBAL_DATA_PTR;

 void local_bus_init(void);

 int board_early_init_f (void)
 {
 	return 0;
 }

 int checkboard (void)
 {
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	volatile u_char *rev= (void *)CONFIG_SYS_BD_REV;

 	printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
 			in_8(rev) >> 4);

 	/*
 	 * Initialize local bus.
 	 */
 	local_bus_init ();

 	out_be32(&ecm->eedr, 0xffffffff);	/* clear ecm errors */
 	out_be32(&ecm->eeer, 0xffffffff);	/* enable ecm errors */
 	return 0;
 }

 /*
  * Initialize Local Bus
  */
 void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

 	uint clkdiv;
 	uint lbc_hz;
 	sys_info_t sysinfo;

 	get_sys_info(&sysinfo);
 	clkdiv = (in_be32(&lbc->lcrr) & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;

 	out_be32(&gur->lbiuiplldcr1, 0x00078080);
 	if (clkdiv == 16) {
 		out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
 	} else if (clkdiv == 8) {
 		out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
 	} else if (clkdiv == 4) {
 		out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
 	}

 	setbits_be32(&lbc->lcrr, 0x00030000);

 	asm("sync;isync;msync");

 	out_be32(&lbc->ltesr, 0xffffffff);	/* Clear LBC error IRQs */
 	out_be32(&lbc->lteir, 0xffffffff);	/* Enable LBC error IRQs */
 }

 /*
  * Initialize SDRAM memory on the Local Bus.
  */
 void lbc_sdram_init(void)
 {
 #if defined(CONFIG_SYS_LBC_SDRAM_SIZE)

 	uint idx;
 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;

 	puts("    SDRAM: ");

 	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");

 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
 	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
 	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
 	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
 	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);

 	out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
 	asm("msync");

 	out_be32(&lbc->lsrt,  CONFIG_SYS_LBC_LSRT);
 	out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
 	asm("msync");

 	/*
 	 * MPC8548 uses "new" 15-16 style addressing.
 	 */
 	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
 	lsdmr_common |= LSDMR_BSMA1516;

 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
 	out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_PCHALL);
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);

 	/*
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
 		out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_ARFRSH);
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
 		udelay(100);
 	}

 	/*
 	 * Issue 8 MODE-set command.
 	 */
 	out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_MRW);
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);

 	/*
 	 * Issue NORMAL OP command.
 	 */
 	out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_NORMAL);
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(200);    /* Overkill. Must wait > 200 bus cycles */

 #endif	/* enable SDRAM init */
 }

 #if defined(CONFIG_SYS_DRAM_TEST)
 int
 testdram(void)
 {
 	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
 	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;

 	printf("Testing DRAM from 0x%08x to 0x%08x\n",
 	       CONFIG_SYS_MEMTEST_START,
 	       CONFIG_SYS_MEMTEST_END);

 	printf("DRAM test phase 1:\n");
 	for (p = pstart; p < pend; p++)
 		*p = 0xaaaaaaaa;

 	for (p = pstart; p < pend; p++) {
 		if (*p != 0xaaaaaaaa) {
 			printf ("DRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}

 	printf("DRAM test phase 2:\n");
 	for (p = pstart; p < pend; p++)
 		*p = 0x55555555;

 	for (p = pstart; p < pend; p++) {
 		if (*p != 0x55555555) {
 			printf ("DRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}

 	printf("DRAM test passed.\n");
 	return 0;
 }
 #endif

 #if !defined(CONFIG_SPD_EEPROM)
 #define CONFIG_SYS_DDR_CONTROL 0xc300c000
 /*************************************************************************
  *  fixed_sdram init -- doesn't use serial presence detect.
  *  assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
  ************************************************************************/
 phys_size_t fixed_sdram(void)
 {
 	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);

 	out_be32(&ddr->cs0_bnds, 0x0000007f);
 	out_be32(&ddr->cs1_bnds, 0x008000ff);
 	out_be32(&ddr->cs2_bnds, 0x00000000);
 	out_be32(&ddr->cs3_bnds, 0x00000000);
 	out_be32(&ddr->cs0_config, 0x80010101);
 	out_be32(&ddr->cs1_config, 0x80010101);
 	out_be32(&ddr->cs2_config, 0x00000000);
 	out_be32(&ddr->cs3_config, 0x00000000);
 	out_be32(&ddr->timing_cfg_3, 0x00000000);
 	out_be32(&ddr->timing_cfg_0, 0x00220802);
 	out_be32(&ddr->timing_cfg_1, 0x38377322);
 	out_be32(&ddr->timing_cfg_2, 0x0fa044C7);
 	out_be32(&ddr->sdram_cfg, 0x4300C000);
 	out_be32(&ddr->sdram_cfg_2, 0x24401000);
 	out_be32(&ddr->sdram_mode, 0x23C00542);
 	out_be32(&ddr->sdram_mode_2, 0x00000000);
 	out_be32(&ddr->sdram_interval, 0x05080100);
 	out_be32(&ddr->sdram_md_cntl, 0x00000000);
 	out_be32(&ddr->sdram_data_init, 0x00000000);
 	out_be32(&ddr->sdram_clk_cntl, 0x03800000);
 	asm("sync;isync;msync");
 	udelay(500);

 	#if defined (CONFIG_DDR_ECC)
 	  /* Enable ECC checking */
 	  out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | 0x20000000);
 	#else
 	  out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
 	#endif

 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif

 #ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
 #endif	/* CONFIG_PCI1 */

 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
 #endif	/* CONFIG_PCIE1 */


 #ifdef CONFIG_PCI
 void
 pci_init_board(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	struct fsl_pci_info pci_info[2];
 	u32 devdisr, pordevsr, porpllsr, io_sel;
 	int first_free_busno = 0;
 	int num = 0;

 #ifdef CONFIG_PCIE1
 	int pcie_configured;
 #endif

 	devdisr = in_be32(&gur->devdisr);
 	pordevsr = in_be32(&gur->pordevsr);
 	porpllsr = in_be32(&gur->porpllsr);
 	io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;

 	debug("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);

 #ifdef CONFIG_PCI1
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
 		uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
 		uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
 		uint pci_speed = CONFIG_SYS_CLK_FREQ;	/* get_clock_freq() */

 		printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33000000) ? "33" :
 			(pci_speed == 66000000) ? "66" : "unknown",
 			pci_clk_sel ? "sync" : "async",
 			pci_arb ? "arbiter" : "external-arbiter");

 		SET_STD_PCI_INFO(pci_info[num], 1);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
 		printf("PCI: disabled\n");
 	}

 	puts("\n");
 #else
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
 #endif

 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */

 #ifdef CONFIG_PCIE1
 	pcie_configured = is_serdes_configured(PCIE1);

 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		printf("PCIE: base address %lx\n", pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
 		printf("PCIE: disabled\n");
 	}

 	puts("\n");
 #else
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
 #endif
 }
 #endif

 int board_eth_init(bd_t *bis)
 {
 	tsec_standard_init(bis);
 	pci_eth_init(bis);
 	return 0;	/* otherwise cpu_eth_init gets run */
 }

 int last_stage_init(void)
 {
 	return 0;
 }

 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);

 #ifdef CONFIG_FSL_PCI_INIT
 	FT_FSL_PCI_SETUP;
 #endif
 }
 #endif
	/*
	* Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com>
	*
	* Copyright 2007 Embedded Specialties, Inc.
	*
	* Copyright 2004, 2007 Freescale Semiconductor.
	*
	* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <pci.h>
	#include <asm/processor.h>
	#include <asm/immap_85xx.h>
	#include <asm/fsl_pci.h>
	#include <asm/fsl_ddr_sdram.h>
	#include <asm/fsl_serdes.h>
	#include <spd_sdram.h>
	#include <netdev.h>
	#include <tsec.h>
	#include <miiphy.h>
	#include <libfdt.h>
	#include <fdt_support.h>

	DECLARE_GLOBAL_DATA_PTR;

	void local_bus_init(void);

	int board_early_init_f (void)
	{
	return 0;
	}

	int checkboard (void)
	{
	volatile ccsr_local_ecm_t ecm = (void )(CONFIG_SYS_MPC85xx_ECM_ADDR);
	volatile u_char rev= (void )CONFIG_SYS_BD_REV;

	printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
	in_8(rev) >> 4);

	/*
	* Initialize local bus.
	*/
	local_bus_init ();

	out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */
	out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */
	return 0;
	}

	/*
	* Initialize Local Bus
	*/
	void
	local_bus_init(void)
	{
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

	uint clkdiv;
	uint lbc_hz;
	sys_info_t sysinfo;

	get_sys_info(&sysinfo);
	clkdiv = (in_be32(&lbc->lcrr) & LCRR_CLKDIV) * 2;
	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;

	out_be32(&gur->lbiuiplldcr1, 0x00078080);
	if (clkdiv == 16) {
	out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
	} else if (clkdiv == 8) {
	out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
	} else if (clkdiv == 4) {
	out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
	}

	setbits_be32(&lbc->lcrr, 0x00030000);

	asm("sync;isync;msync");

	out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */
	out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */
	}

	/*
	* Initialize SDRAM memory on the Local Bus.
	*/
	void lbc_sdram_init(void)
	{
	#if defined(CONFIG_SYS_LBC_SDRAM_SIZE)

	uint idx;
	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
	uint sdram_addr = (uint )CONFIG_SYS_LBC_SDRAM_BASE;
	uint lsdmr_common;

	puts(" SDRAM: ");

	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");

	/*
	* Setup SDRAM Base and Option Registers
	*/
	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);

	out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
	asm("msync");

	out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT);
	out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
	asm("msync");

	/*
	* MPC8548 uses "new" 15-16 style addressing.
	*/
	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
	lsdmr_common \|= LSDMR_BSMA1516;

	/*
	* Issue PRECHARGE ALL command.
	*/
	out_be32(&lbc->lsdmr, lsdmr_common \| LSDMR_OP_PCHALL);
	asm("sync;msync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	/*
	* Issue 8 AUTO REFRESH commands.
	*/
	for (idx = 0; idx < 8; idx++) {
	out_be32(&lbc->lsdmr, lsdmr_common \| LSDMR_OP_ARFRSH);
	asm("sync;msync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);
	}

	/*
	* Issue 8 MODE-set command.
	*/
	out_be32(&lbc->lsdmr, lsdmr_common \| LSDMR_OP_MRW);
	asm("sync;msync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	/*
	* Issue NORMAL OP command.
	*/
	out_be32(&lbc->lsdmr, lsdmr_common \| LSDMR_OP_NORMAL);
	asm("sync;msync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(200); /* Overkill. Must wait > 200 bus cycles */

	#endif /* enable SDRAM init */
	}

	#if defined(CONFIG_SYS_DRAM_TEST)
	int
	testdram(void)
	{
	uint pstart = (uint ) CONFIG_SYS_MEMTEST_START;
	uint pend = (uint ) CONFIG_SYS_MEMTEST_END;
	uint *p;

	printf("Testing DRAM from 0x%08x to 0x%08x\n",
	CONFIG_SYS_MEMTEST_START,
	CONFIG_SYS_MEMTEST_END);

	printf("DRAM test phase 1:\n");
	for (p = pstart; p < pend; p++)
	*p = 0xaaaaaaaa;

	for (p = pstart; p < pend; p++) {
	if (*p != 0xaaaaaaaa) {
	printf ("DRAM test fails at: %08x\n", (uint) p);
	return 1;
	}
	}

	printf("DRAM test phase 2:\n");
	for (p = pstart; p < pend; p++)
	*p = 0x55555555;

	for (p = pstart; p < pend; p++) {
	if (*p != 0x55555555) {
	printf ("DRAM test fails at: %08x\n", (uint) p);
	return 1;
	}
	}

	printf("DRAM test passed.\n");
	return 0;
	}
	#endif

	#if !defined(CONFIG_SPD_EEPROM)
	#define CONFIG_SYS_DDR_CONTROL 0xc300c000
	/*************************************************************************
	* fixed_sdram init -- doesn't use serial presence detect.
	* assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
	************************************************************************/
	phys_size_t fixed_sdram(void)
	{
	volatile ccsr_ddr_t ddr = (void )(CONFIG_SYS_MPC85xx_DDR_ADDR);

	out_be32(&ddr->cs0_bnds, 0x0000007f);
	out_be32(&ddr->cs1_bnds, 0x008000ff);
	out_be32(&ddr->cs2_bnds, 0x00000000);
	out_be32(&ddr->cs3_bnds, 0x00000000);
	out_be32(&ddr->cs0_config, 0x80010101);
	out_be32(&ddr->cs1_config, 0x80010101);
	out_be32(&ddr->cs2_config, 0x00000000);
	out_be32(&ddr->cs3_config, 0x00000000);
	out_be32(&ddr->timing_cfg_3, 0x00000000);
	out_be32(&ddr->timing_cfg_0, 0x00220802);
	out_be32(&ddr->timing_cfg_1, 0x38377322);
	out_be32(&ddr->timing_cfg_2, 0x0fa044C7);
	out_be32(&ddr->sdram_cfg, 0x4300C000);
	out_be32(&ddr->sdram_cfg_2, 0x24401000);
	out_be32(&ddr->sdram_mode, 0x23C00542);
	out_be32(&ddr->sdram_mode_2, 0x00000000);
	out_be32(&ddr->sdram_interval, 0x05080100);
	out_be32(&ddr->sdram_md_cntl, 0x00000000);
	out_be32(&ddr->sdram_data_init, 0x00000000);
	out_be32(&ddr->sdram_clk_cntl, 0x03800000);
	asm("sync;isync;msync");
	udelay(500);

	#if defined (CONFIG_DDR_ECC)
	/* Enable ECC checking */
	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL \| 0x20000000);
	#else
	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
	#endif

	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
	}
	#endif

	#ifdef CONFIG_PCI1
	static struct pci_controller pci1_hose;
	#endif /* CONFIG_PCI1 */

	#ifdef CONFIG_PCIE1
	static struct pci_controller pcie1_hose;
	#endif /* CONFIG_PCIE1 */


	#ifdef CONFIG_PCI
	void
	pci_init_board(void)
	{
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	struct fsl_pci_info pci_info[2];
	u32 devdisr, pordevsr, porpllsr, io_sel;
	int first_free_busno = 0;
	int num = 0;

	#ifdef CONFIG_PCIE1
	int pcie_configured;
	#endif

	devdisr = in_be32(&gur->devdisr);
	pordevsr = in_be32(&gur->pordevsr);
	porpllsr = in_be32(&gur->porpllsr);
	io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;

	debug(" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);

	#ifdef CONFIG_PCI1
	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
	uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
	uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
	uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
	uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */

	printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
	(pci_32) ? 32 : 64,
	(pci_speed == 33000000) ? "33" :
	(pci_speed == 66000000) ? "66" : "unknown",
	pci_clk_sel ? "sync" : "async",
	pci_arb ? "arbiter" : "external-arbiter");

	SET_STD_PCI_INFO(pci_info[num], 1);
	first_free_busno = fsl_pci_init_port(&pci_info[num++],
	&pci1_hose, first_free_busno);
	} else {
	printf("PCI: disabled\n");
	}

	puts("\n");
	#else
	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
	#endif

	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */

	#ifdef CONFIG_PCIE1
	pcie_configured = is_serdes_configured(PCIE1);

	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
	SET_STD_PCIE_INFO(pci_info[num], 1);
	printf("PCIE: base address %lx\n", pci_info[num].regs);
	first_free_busno = fsl_pci_init_port(&pci_info[num++],
	&pcie1_hose, first_free_busno);
	} else {
	printf("PCIE: disabled\n");
	}

	puts("\n");
	#else
	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
	#endif
	}
	#endif

	int board_eth_init(bd_t *bis)
	{
	tsec_standard_init(bis);
	pci_eth_init(bis);
	return 0; /* otherwise cpu_eth_init gets run */
	}

	int last_stage_init(void)
	{
	return 0;
	}

	#if defined(CONFIG_OF_BOARD_SETUP)
	void ft_board_setup(void blob, bd_t bd)
	{
	ft_cpu_setup(blob, bd);

	#ifdef CONFIG_FSL_PCI_INIT
	FT_FSL_PCI_SETUP;
	#endif
	}
	#endif