include/configs/CU824.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  *
  * Configuration settings for the CU824 board.
  *
  */

 /* ------------------------------------------------------------------------- */

 /*
  * board/config.h - configuration options, board specific
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC824X		1
 #define CONFIG_MPC8240		1
 #define CONFIG_CU824		1


 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/

 #define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"

 #define CONFIG_BOOTCOMMAND	"bootm FE020000"	/* autoboot command	*/
 #define CONFIG_BOOTDELAY	5

 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)

 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				CFG_CMD_BEDBUG  | \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_PCI	| \
 				0 /* CFG_CMD_DATE */	)

 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
  */
 #include <cmd_confdefs.h>


 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/

 #if 1
 #define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif

 /* Print Buffer Size
  */
 #define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)

 #define	CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/

 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE	    0x00000000
 #define CFG_FLASH_BASE	    0xFF000000

 #define CFG_RESET_ADDRESS   0xFFF00100

 #define CFG_EUMB_ADDR	    0xFCE00000

 #define CFG_MONITOR_BASE    TEXT_BASE

 #define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/

 #define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
 #define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/

 	/* Maximum amount of RAM.
 	 */
 #define CFG_MAX_RAM_SIZE    0x10000000


 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
 #undef CFG_RAMBOOT
 #else
 #define CFG_RAMBOOT
 #endif


 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */

 	/* Size in bytes reserved for initial data
 	 */
 #define CFG_GBL_DATA_SIZE    128

 #define CFG_INIT_RAM_ADDR     0x40000000
 #define CFG_INIT_RAM_END      0x1000
 #define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)

 /*
  * NS16550 Configuration
  */
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL

 #define CFG_NS16550_REG_SIZE	4

 #define CFG_NS16550_CLK		(14745600 / 2)

 #define CFG_NS16550_COM1	0xFE800080
 #define CFG_NS16550_COM2	0xFE8000C0

 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  * For the detail description refer to the MPC8240 user's manual.
  */

 #define CONFIG_SYS_CLK_FREQ  33000000
 #define CFG_HZ		     1000

 	/* Bit-field values for MCCR1.
 	 */
 #define CFG_ROMNAL	    0
 #define CFG_ROMFAL	    7

 	/* Bit-field values for MCCR2.
 	 */
 #define CFG_REFINT	    430	    /* Refresh interval			*/

 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
 #define CFG_BSTOPRE	    192

 	/* Bit-field values for MCCR3.
 	 */
 #define CFG_REFREC	    2	    /* Refresh to activate interval	*/
 #define CFG_RDLAT	    3	    /* Data latancy from read command	*/

 	/* Bit-field values for MCCR4.
 	 */
 #define CFG_PRETOACT	    2	    /* Precharge to activate interval	*/
 #define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
 #define CFG_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
 #define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
 #define CFG_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
 #define CFG_ACTORW	    2
 #define CFG_REGISTERD_TYPE_BUFFER 1

 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
  * start/end addresses. The upper two bits will always be 0, and the lower
  * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
  * address. Refer to the MPC8240 book.
  */

 #define CFG_BANK0_START	    0x00000000
 #define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
 #define CFG_BANK0_ENABLE    1
 #define CFG_BANK1_START	    0x3ff00000
 #define CFG_BANK1_END	    0x3fffffff
 #define CFG_BANK1_ENABLE    0
 #define CFG_BANK2_START	    0x3ff00000
 #define CFG_BANK2_END	    0x3fffffff
 #define CFG_BANK2_ENABLE    0
 #define CFG_BANK3_START	    0x3ff00000
 #define CFG_BANK3_END	    0x3fffffff
 #define CFG_BANK3_ENABLE    0
 #define CFG_BANK4_START	    0x3ff00000
 #define CFG_BANK4_END	    0x3fffffff
 #define CFG_BANK4_ENABLE    0
 #define CFG_BANK5_START	    0x3ff00000
 #define CFG_BANK5_END	    0x3fffffff
 #define CFG_BANK5_ENABLE    0
 #define CFG_BANK6_START	    0x3ff00000
 #define CFG_BANK6_END	    0x3fffffff
 #define CFG_BANK6_ENABLE    0
 #define CFG_BANK7_START	    0x3ff00000
 #define CFG_BANK7_END	    0x3fffffff
 #define CFG_BANK7_ENABLE    0

 #define CFG_ODCR	    0xff

 #define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)

 #define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)

 #define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 #define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)

 #define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 #define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)

 #define CFG_DBAT0L  CFG_IBAT0L
 #define CFG_DBAT0U  CFG_IBAT0U
 #define CFG_DBAT1L  CFG_IBAT1L
 #define CFG_DBAT1U  CFG_IBAT1U
 #define CFG_DBAT2L  CFG_IBAT2L
 #define CFG_DBAT2U  CFG_IBAT2U
 #define CFG_DBAT3L  CFG_IBAT3L
 #define CFG_DBAT3U  CFG_IBAT3U

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */

 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	2	/* Max number of flash banks		*/
 #define CFG_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/

 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

 	/* Warining: environment is not EMBEDDED in the U-Boot code.
 	 * It's stored in flash separately.
 	 */
 #define CFG_ENV_IS_IN_FLASH	    1
 #if 0
 #define CFG_ENV_ADDR		0xFF008000
 #define CFG_ENV_SIZE		0x8000	/* Size of the Environment Sector	*/
 #else
 #define CFG_ENV_ADDR		0xFFFC0000
 #define CFG_ENV_SIZE		0x4000	/* Size of the Environment		*/
 #define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
 #define CFG_ENV_SECT_SIZE	0x40000 /* Size of the Environment Sector	*/
 #endif

 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif

 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/

 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
  */
 #define CONFIG_PCI			/* include pci support			*/
 #undef CONFIG_PCI_PNP

 #define CONFIG_NET_MULTI		/* Multi ethernet cards support 	*/

 #define CONFIG_TULIP
 #define CONFIG_TULIP_USE_IO

 #define CFG_ETH_DEV_FN	     0x7800
 #define CFG_ETH_IOBASE	     0x00104000

 #define CONFIG_EEPRO100
 #define PCI_ENET0_IOADDR	0x00104000
 #define PCI_ENET0_MEMADDR	0x80000000
 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2001
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	*
	* Configuration settings for the CU824 board.
	*
	*/

	/* ------------------------------------------------------------------------- */

	/*
	* board/config.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC824X 1
	#define CONFIG_MPC8240 1
	#define CONFIG_CU824 1


	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 9600
	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */

	#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"

	#define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */
	#define CONFIG_BOOTDELAY 5

	#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT \| CONFIG_BOOTP_BOOTFILESIZE)

	#define CONFIG_COMMANDS ( CONFIG_CMD_DFL \| \
	CFG_CMD_BEDBUG \| \
	CFG_CMD_DHCP \| \
	CFG_CMD_PCI \| \
	0 /* CFG_CMD_DATE */ )

	/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
	*/
	#include <cmd_confdefs.h>


	/*
	* Miscellaneous configurable options
	*/
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */

	#if 1
	#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
	#endif
	#ifdef CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "
	#endif

	/* Print Buffer Size
	*/
	#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)

	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	#define CFG_LOAD_ADDR 0x00100000 /* Default load address */

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CFG_SDRAM_BASE _must_ start at 0
	*/
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_FLASH_BASE 0xFF000000

	#define CFG_RESET_ADDRESS 0xFFF00100

	#define CFG_EUMB_ADDR 0xFCE00000

	#define CFG_MONITOR_BASE TEXT_BASE

	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */

	#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
	#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */

	/* Maximum amount of RAM.
	*/
	#define CFG_MAX_RAM_SIZE 0x10000000


	#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
	#undef CFG_RAMBOOT
	#else
	#define CFG_RAMBOOT
	#endif


	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area
	*/

	/* Size in bytes reserved for initial data
	*/
	#define CFG_GBL_DATA_SIZE 128

	#define CFG_INIT_RAM_ADDR 0x40000000
	#define CFG_INIT_RAM_END 0x1000
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)

	/*
	* NS16550 Configuration
	*/
	#define CFG_NS16550
	#define CFG_NS16550_SERIAL

	#define CFG_NS16550_REG_SIZE 4

	#define CFG_NS16550_CLK (14745600 / 2)

	#define CFG_NS16550_COM1 0xFE800080
	#define CFG_NS16550_COM2 0xFE8000C0

	/*
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	* For the detail description refer to the MPC8240 user's manual.
	*/

	#define CONFIG_SYS_CLK_FREQ 33000000
	#define CFG_HZ 1000

	/* Bit-field values for MCCR1.
	*/
	#define CFG_ROMNAL 0
	#define CFG_ROMFAL 7

	/* Bit-field values for MCCR2.
	*/
	#define CFG_REFINT 430 /* Refresh interval */

	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
	*/
	#define CFG_BSTOPRE 192

	/* Bit-field values for MCCR3.
	*/
	#define CFG_REFREC 2 /* Refresh to activate interval */
	#define CFG_RDLAT 3 /* Data latancy from read command */

	/* Bit-field values for MCCR4.
	*/
	#define CFG_PRETOACT 2 /* Precharge to activate interval */
	#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
	#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
	#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
	#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
	#define CFG_ACTORW 2
	#define CFG_REGISTERD_TYPE_BUFFER 1

	/* Memory bank settings.
	* Only bits 20-29 are actually used from these vales to set the
	* start/end addresses. The upper two bits will always be 0, and the lower
	* 20 bits will be 0x00000 for a start address, or 0xfffff for an end
	* address. Refer to the MPC8240 book.
	*/

	#define CFG_BANK0_START 0x00000000
	#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
	#define CFG_BANK0_ENABLE 1
	#define CFG_BANK1_START 0x3ff00000
	#define CFG_BANK1_END 0x3fffffff
	#define CFG_BANK1_ENABLE 0
	#define CFG_BANK2_START 0x3ff00000
	#define CFG_BANK2_END 0x3fffffff
	#define CFG_BANK2_ENABLE 0
	#define CFG_BANK3_START 0x3ff00000
	#define CFG_BANK3_END 0x3fffffff
	#define CFG_BANK3_ENABLE 0
	#define CFG_BANK4_START 0x3ff00000
	#define CFG_BANK4_END 0x3fffffff
	#define CFG_BANK4_ENABLE 0
	#define CFG_BANK5_START 0x3ff00000
	#define CFG_BANK5_END 0x3fffffff
	#define CFG_BANK5_ENABLE 0
	#define CFG_BANK6_START 0x3ff00000
	#define CFG_BANK6_END 0x3fffffff
	#define CFG_BANK6_ENABLE 0
	#define CFG_BANK7_START 0x3ff00000
	#define CFG_BANK7_END 0x3fffffff
	#define CFG_BANK7_ENABLE 0

	#define CFG_ODCR 0xff

	#define CFG_IBAT0L (CFG_SDRAM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	#define CFG_IBAT0U (CFG_SDRAM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)

	#define CFG_IBAT1L (CFG_INIT_RAM_ADDR \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	#define CFG_IBAT1U (CFG_INIT_RAM_ADDR \| BATU_BL_128K \| BATU_VS \| BATU_VP)

	#define CFG_IBAT2L (0x80000000 \| BATL_PP_10 \| BATL_CACHEINHIBIT)
	#define CFG_IBAT2U (0x80000000 \| BATU_BL_256M \| BATU_VS \| BATU_VP)

	#define CFG_IBAT3L (0xFC000000 \| BATL_PP_10 \| BATL_CACHEINHIBIT)
	#define CFG_IBAT3U (0xFC000000 \| BATU_BL_64M \| BATU_VS \| BATU_VP)

	#define CFG_DBAT0L CFG_IBAT0L
	#define CFG_DBAT0U CFG_IBAT0U
	#define CFG_DBAT1L CFG_IBAT1L
	#define CFG_DBAT1U CFG_IBAT1U
	#define CFG_DBAT2L CFG_IBAT2L
	#define CFG_DBAT2U CFG_IBAT2U
	#define CFG_DBAT3L CFG_IBAT3L
	#define CFG_DBAT3U CFG_IBAT3U

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CFG_MAX_FLASH_BANKS 2 /* Max number of flash banks */
	#define CFG_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */

	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */

	/* Warining: environment is not EMBEDDED in the U-Boot code.
	* It's stored in flash separately.
	*/
	#define CFG_ENV_IS_IN_FLASH 1
	#if 0
	#define CFG_ENV_ADDR 0xFF008000
	#define CFG_ENV_SIZE 0x8000 /* Size of the Environment Sector */
	#else
	#define CFG_ENV_ADDR 0xFFFC0000
	#define CFG_ENV_SIZE 0x4000 /* Size of the Environment */
	#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
	#define CFG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */
	#endif

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CFG_CACHELINE_SIZE 32
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	/*-----------------------------------------------------------------------
	* PCI stuff
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_PCI /* include pci support */
	#undef CONFIG_PCI_PNP

	#define CONFIG_NET_MULTI /* Multi ethernet cards support */

	#define CONFIG_TULIP
	#define CONFIG_TULIP_USE_IO

	#define CFG_ETH_DEV_FN 0x7800
	#define CFG_ETH_IOBASE 0x00104000

	#define CONFIG_EEPRO100
	#define PCI_ENET0_IOADDR 0x00104000
	#define PCI_ENET0_MEMADDR 0x80000000
	#endif /* __CONFIG_H */