| menu "MTD Support" |
| |
| config MTD_PARTITIONS |
| bool |
| |
| config MTD |
| bool "Enable MTD layer" |
| help |
| Enable the MTD stack, necessary to interact with NAND, NOR, |
| SPI-NOR, SPI-NAND, OneNAND, etc. |
| |
| config DM_MTD |
| bool "Enable Driver Model for MTD drivers" |
| depends on DM |
| help |
| Enable driver model for Memory Technology Devices (MTD), such as |
| flash, RAM and similar chips, often used for solid state file |
| systems on embedded devices. |
| |
| config MTD_NOR_FLASH |
| bool "Enable parallel NOR flash support" |
| help |
| Enable support for parallel NOR flash. |
| |
| config MTD_CONCAT |
| bool "Enable MTD device concatenation" |
| depends on MTD |
| help |
| Enable support for concatenating multiple physical MTD devices |
| into a single logical device. The larger logical device can then |
| be partitioned. |
| |
| config SYS_MTDPARTS_RUNTIME |
| bool "Allow MTDPARTS to be configured at runtime" |
| depends on MTD |
| help |
| This option allows to call the function board_mtdparts_default to |
| dynamically build the variables mtdids and mtdparts at runtime. |
| |
| config FLASH_CFI_DRIVER |
| bool "Enable CFI Flash driver" |
| select USE_SYS_MAX_FLASH_BANKS |
| help |
| The Common Flash Interface specification was developed by Intel, |
| AMD and other flash manufactures. It provides a universal method |
| for probing the capabilities of flash devices. If you wish to |
| support any device that is CFI-compliant, you need to enable this |
| option. Visit <http://www.amd.com/products/nvd/overview/cfi.html> |
| for more information on CFI. |
| |
| config CFI_FLASH |
| bool "Enable Driver Model for CFI Flash driver" |
| depends on DM_MTD |
| select FLASH_CFI_DRIVER |
| help |
| The Common Flash Interface specification was developed by Intel, |
| AMD and other flash manufactures. It provides a universal method |
| for probing the capabilities of flash devices. If you wish to |
| support any device that is CFI-compliant, you need to enable this |
| option. Visit <http://www.amd.com/products/nvd/overview/cfi.html> |
| for more information on CFI. |
| |
| config CFI_FLASH_USE_WEAK_ACCESSORS |
| bool "Allow read/write functions to be overridden" |
| depends on FLASH_CFI_DRIVER |
| help |
| Enable this option to allow for the flash_{read,write}{8,16,32,64} |
| functions to be overridden by the platform. |
| |
| config SYS_FLASH_USE_BUFFER_WRITE |
| bool "Enable buffered writes to flash" |
| depends on FLASH_CFI_DRIVER |
| help |
| Use buffered writes to flash. |
| |
| config FLASH_CFI_MTD |
| bool "Enable CFI MTD driver" |
| depends on FLASH_CFI_DRIVER |
| help |
| This option enables the building of the cfi_mtd driver |
| in the drivers directory. The driver exports CFI flash |
| to the MTD layer. |
| |
| config SYS_FLASH_PROTECTION |
| bool "Use hardware flash protection" |
| depends on FLASH_CFI_DRIVER |
| help |
| If defined, hardware flash sectors protection is used |
| instead of U-Boot software protection. |
| |
| config SYS_FLASH_CFI |
| bool "Define extra elements in CFI for flash geometry" |
| depends on FLASH_CFI_DRIVER |
| help |
| Define if the flash driver uses extra elements in the |
| common flash structure for storing flash geometry. |
| |
| config ALTERA_QSPI |
| bool "Altera Generic Quad SPI Controller" |
| depends on DM_MTD |
| select USE_SYS_MAX_FLASH_BANKS |
| help |
| This enables access to Altera EPCQ/EPCS flash chips using the |
| Altera Generic Quad SPI Controller. The controller converts SPI |
| NOR flash to parallel flash interface. Please find details on the |
| "Embedded Peripherals IP User Guide" of Altera. |
| |
| config FLASH_PIC32 |
| bool "Microchip PIC32 Flash driver" |
| depends on MACH_PIC32 && DM_MTD |
| select USE_SYS_MAX_FLASH_BANKS |
| help |
| This enables access to Microchip PIC32 internal non-CFI flash |
| chips through PIC32 Non-Volatile-Memory Controller. |
| |
| config RENESAS_RPC_HF |
| bool "Renesas RCar Gen3 RPC HyperFlash driver" |
| depends on RCAR_GEN3 && DM_MTD |
| help |
| This enables access to HyperFlash memory through the Renesas |
| RCar Gen3 RPC controller. |
| |
| config HBMC_AM654 |
| bool "HyperBus controller driver for AM65x SoC" |
| depends on SYSCON |
| help |
| This is the driver for HyperBus controller on TI's AM65x and |
| other SoCs |
| |
| config STM32_FLASH |
| bool "STM32 MCU Flash driver" |
| depends on ARCH_STM32 |
| select USE_SYS_MAX_FLASH_BANKS |
| help |
| This is the driver of embedded flash for some STMicroelectronics |
| STM32 MCU. |
| |
| config USE_SYS_MAX_FLASH_BANKS |
| bool "Enable Max number of Flash memory banks" |
| help |
| When this option is enabled, the CONFIG_SYS_MAX_FLASH_BANKS |
| will be defined. |
| |
| config SYS_MAX_FLASH_BANKS |
| int "Max number of Flash memory banks" |
| depends on USE_SYS_MAX_FLASH_BANKS |
| default 1 |
| help |
| Max number of Flash memory banks using by the MTD framework, in the |
| flash CFI driver and in some other driver to define the flash_info |
| struct declaration. |
| |
| config SYS_MAX_FLASH_BANKS_DETECT |
| bool "Detection of flash banks number in CFI driver" |
| depends on CFI_FLASH && FLASH_CFI_DRIVER |
| help |
| This enables detection of number of flash banks in CFI driver, |
| to reduce the effective number of flash bank, between 0 and |
| CONFIG_SYS_MAX_FLASH_BANKS |
| |
| source "drivers/mtd/nand/Kconfig" |
| |
| config SYS_NAND_MAX_CHIPS |
| int "NAND max chips" |
| depends on MTD_RAW_NAND || CMD_ONENAND || TARGET_S5PC210_UNIVERSAL || \ |
| SPL_OMAP3_ID_NAND |
| default 1 |
| help |
| The maximum number of NAND chips per device to be supported. |
| |
| source "drivers/mtd/spi/Kconfig" |
| |
| source "drivers/mtd/ubi/Kconfig" |
| |
| endmenu |