| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| */ |
| #include <common.h> |
| #include <clk.h> |
| #include <asm/io.h> |
| #include <asm/arch/stm32.h> |
| #include <asm/arch/sys_proto.h> |
| #include <dm/uclass.h> |
| |
| /* RCC register */ |
| #define RCC_TZCR (STM32_RCC_BASE + 0x00) |
| #define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C) |
| #define RCC_BDCR (STM32_RCC_BASE + 0x0140) |
| #define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208) |
| #define RCC_BDCR_VSWRST BIT(31) |
| #define RCC_BDCR_RTCSRC GENMASK(17, 16) |
| #define RCC_DBGCFGR_DBGCKEN BIT(8) |
| |
| /* Security register */ |
| #define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04) |
| #define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10) |
| |
| #define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008) |
| #define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110) |
| #define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114) |
| |
| #define TAMP_CR1 (STM32_TAMP_BASE + 0x00) |
| |
| #define PWR_CR1 (STM32_PWR_BASE + 0x00) |
| #define PWR_CR1_DBP BIT(8) |
| |
| /* DBGMCU register */ |
| #define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00) |
| #define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C) |
| #define DBGMCU_APB4FZ1_IWDG2 BIT(2) |
| #define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0) |
| #define DBGMCU_IDC_DEV_ID_SHIFT 0 |
| #define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16) |
| #define DBGMCU_IDC_REV_ID_SHIFT 16 |
| |
| /* boot interface from Bootrom |
| * - boot instance = bit 31:16 |
| * - boot device = bit 15:0 |
| */ |
| #define BOOTROM_PARAM_ADDR 0x2FFC0078 |
| #define BOOTROM_MODE_MASK GENMASK(15, 0) |
| #define BOOTROM_MODE_SHIFT 0 |
| #define BOOTROM_INSTANCE_MASK GENMASK(31, 16) |
| #define BOOTROM_INSTANCE_SHIFT 16 |
| |
| #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) |
| static void security_init(void) |
| { |
| /* Disable the backup domain write protection */ |
| /* the protection is enable at each reset by hardware */ |
| /* And must be disable by software */ |
| setbits_le32(PWR_CR1, PWR_CR1_DBP); |
| |
| while (!(readl(PWR_CR1) & PWR_CR1_DBP)) |
| ; |
| |
| /* If RTC clock isn't enable so this is a cold boot then we need |
| * to reset the backup domain |
| */ |
| if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) { |
| setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST); |
| while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST)) |
| ; |
| clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST); |
| } |
| |
| /* allow non secure access in Write/Read for all peripheral */ |
| writel(GENMASK(25, 0), ETZPC_DECPROT0); |
| |
| /* Open SYSRAM for no secure access */ |
| writel(0x0, ETZPC_TZMA1_SIZE); |
| |
| /* enable TZC1 TZC2 clock */ |
| writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR); |
| |
| /* Region 0 set to no access by default */ |
| /* bit 0 / 16 => nsaid0 read/write Enable |
| * bit 1 / 17 => nsaid1 read/write Enable |
| * ... |
| * bit 15 / 31 => nsaid15 read/write Enable |
| */ |
| writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0); |
| /* bit 30 / 31 => Secure Global Enable : write/read */ |
| /* bit 0 / 1 => Region Enable for filter 0/1 */ |
| writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0); |
| |
| /* Enable Filter 0 and 1 */ |
| setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1)); |
| |
| /* RCC trust zone deactivated */ |
| writel(0x0, RCC_TZCR); |
| |
| /* TAMP: deactivate the internal tamper |
| * Bit 23 ITAMP8E: monotonic counter overflow |
| * Bit 20 ITAMP5E: RTC calendar overflow |
| * Bit 19 ITAMP4E: HSE monitoring |
| * Bit 18 ITAMP3E: LSE monitoring |
| * Bit 16 ITAMP1E: RTC power domain supply monitoring |
| */ |
| writel(0x0, TAMP_CR1); |
| } |
| |
| /* |
| * Debug init |
| */ |
| static void dbgmcu_init(void) |
| { |
| setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN); |
| |
| /* Freeze IWDG2 if Cortex-A7 is in debug mode */ |
| setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2); |
| } |
| #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */ |
| |
| static u32 get_bootmode(void) |
| { |
| u32 boot_mode; |
| #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) |
| u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR); |
| u32 bootrom_device, bootrom_instance; |
| |
| bootrom_device = |
| (bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT; |
| bootrom_instance = |
| (bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT; |
| boot_mode = |
| ((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) | |
| ((bootrom_instance << BOOT_INSTANCE_SHIFT) & |
| BOOT_INSTANCE_MASK); |
| |
| /* save the boot mode in TAMP backup register */ |
| clrsetbits_le32(TAMP_BOOT_CONTEXT, |
| TAMP_BOOT_MODE_MASK, |
| boot_mode << TAMP_BOOT_MODE_SHIFT); |
| #else |
| /* read TAMP backup register */ |
| boot_mode = (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >> |
| TAMP_BOOT_MODE_SHIFT; |
| #endif |
| return boot_mode; |
| } |
| |
| /* |
| * Early system init |
| */ |
| int arch_cpu_init(void) |
| { |
| /* early armv7 timer init: needed for polling */ |
| timer_init(); |
| |
| #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) |
| dbgmcu_init(); |
| |
| security_init(); |
| #endif |
| /* get bootmode from BootRom context: saved in TAMP register */ |
| get_bootmode(); |
| |
| return 0; |
| } |
| |
| void enable_caches(void) |
| { |
| /* Enable D-cache. I-cache is already enabled in start.S */ |
| dcache_enable(); |
| } |
| |
| static u32 read_idc(void) |
| { |
| setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN); |
| |
| return readl(DBGMCU_IDC); |
| } |
| |
| u32 get_cpu_rev(void) |
| { |
| return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT; |
| } |
| |
| u32 get_cpu_type(void) |
| { |
| return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT; |
| } |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| char *cpu_s, *cpu_r; |
| |
| switch (get_cpu_type()) { |
| case CPU_STMP32MP15x: |
| cpu_s = "15x"; |
| break; |
| default: |
| cpu_s = "?"; |
| break; |
| } |
| |
| switch (get_cpu_rev()) { |
| case CPU_REVA: |
| cpu_r = "A"; |
| break; |
| case CPU_REVB: |
| cpu_r = "B"; |
| break; |
| default: |
| cpu_r = "?"; |
| break; |
| } |
| |
| printf("CPU: STM32MP%s.%s\n", cpu_s, cpu_r); |
| |
| return 0; |
| } |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| static void setup_boot_mode(void) |
| { |
| char cmd[60]; |
| u32 boot_ctx = readl(TAMP_BOOT_CONTEXT); |
| u32 boot_mode = |
| (boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT; |
| int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1; |
| |
| pr_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d\n", |
| __func__, boot_ctx, boot_mode, instance); |
| |
| switch (boot_mode & TAMP_BOOT_DEVICE_MASK) { |
| case BOOT_SERIAL_UART: |
| sprintf(cmd, "%d", instance); |
| env_set("boot_device", "uart"); |
| env_set("boot_instance", cmd); |
| break; |
| case BOOT_SERIAL_USB: |
| env_set("boot_device", "usb"); |
| env_set("boot_instance", "0"); |
| break; |
| case BOOT_FLASH_SD: |
| case BOOT_FLASH_EMMC: |
| sprintf(cmd, "%d", instance); |
| env_set("boot_device", "mmc"); |
| env_set("boot_instance", cmd); |
| break; |
| case BOOT_FLASH_NAND: |
| env_set("boot_device", "nand"); |
| env_set("boot_instance", "0"); |
| break; |
| case BOOT_FLASH_NOR: |
| env_set("boot_device", "nor"); |
| env_set("boot_instance", "0"); |
| break; |
| default: |
| pr_debug("unexpected boot mode = %x\n", boot_mode); |
| break; |
| } |
| } |
| |
| int arch_misc_init(void) |
| { |
| setup_boot_mode(); |
| |
| return 0; |
| } |