| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for AM6 SoC Family Main Domain peripherals |
| * |
| * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| #include <dt-bindings/phy/phy-am654-serdes.h> |
| #include <dt-bindings/phy/phy.h> |
| |
| &cbass_main { |
| gic500: interrupt-controller@1800000 { |
| compatible = "arm,gic-v3"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ |
| <0x00 0x01880000 0x00 0x90000>; /* GICR */ |
| /* |
| * vcpumntirq: |
| * virtual CPU interface maintenance interrupt |
| */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| gic_its: gic-its@18200000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0x00 0x01820000 0x00 0x10000>; |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| }; |
| |
| secure_proxy_main: mailbox@32c00000 { |
| compatible = "ti,am654-secure-proxy"; |
| #mbox-cells = <1>; |
| reg-names = "target_data", "rt", "scfg"; |
| reg = <0x00 0x32c00000 0x00 0x100000>, |
| <0x00 0x32400000 0x00 0x100000>, |
| <0x00 0x32800000 0x00 0x100000>; |
| interrupt-names = "rx_011"; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| main_uart0: serial@2800000 { |
| compatible = "ti,am654-uart"; |
| reg = <0x00 0x02800000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| }; |
| |
| main_uart1: serial@2810000 { |
| compatible = "ti,am654-uart"; |
| reg = <0x00 0x02810000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| }; |
| |
| main_uart2: serial@2820000 { |
| compatible = "ti,am654-uart"; |
| reg = <0x00 0x02820000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| }; |
| |
| main_pmx0: pinmux@11c000 { |
| compatible = "pinctrl-single"; |
| reg = <0x0 0x11c000 0x0 0x2e4>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| }; |
| |
| main_pmx1: pinmux@11c2e8 { |
| compatible = "pinctrl-single"; |
| reg = <0x0 0x11c2e8 0x0 0x24>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| }; |
| |
| sdhci0: sdhci@4f80000 { |
| compatible = "ti,am654-sdhci-5.1"; |
| reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; |
| power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; |
| clock-names = "clk_ahb", "clk_xin"; |
| interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; |
| mmc-ddr-1_8v; |
| mmc-hs200-1_8v; |
| ti,otap-del-sel = <0x2>; |
| ti,trm-icp = <0x8>; |
| dma-coherent; |
| }; |
| |
| main_i2c0: i2c@2000000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2000000 0x0 0x100>; |
| interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 110 1>; |
| power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_i2c1: i2c@2010000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2010000 0x0 0x100>; |
| interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 111 1>; |
| power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_i2c2: i2c@2020000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2020000 0x0 0x100>; |
| interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 112 1>; |
| power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_i2c3: i2c@2030000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2030000 0x0 0x100>; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 113 1>; |
| power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| scm_conf: scm_conf@100000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0 0x00100000 0 0x1c000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x00100000 0x1c000>; |
| |
| serdes_mux: mux-controller { |
| compatible = "mmio-mux"; |
| #mux-control-cells = <1>; |
| mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */ |
| <0x4090 0x3>; /* SERDES1 lane select */ |
| }; |
| |
| pcie0_mode: pcie-mode@4060 { |
| compatible = "syscon"; |
| reg = <0x00004060 0x4>; |
| }; |
| |
| pcie1_mode: pcie-mode@4070 { |
| compatible = "syscon"; |
| reg = <0x00004070 0x4>; |
| }; |
| |
| serdes0_clk: serdes_clk@4080 { |
| compatible = "syscon"; |
| reg = <0x00004080 0x4>; |
| }; |
| |
| serdes1_clk: serdes_clk@4090 { |
| compatible = "syscon"; |
| reg = <0x00004090 0x4>; |
| }; |
| |
| pcie_devid: pcie-devid@210 { |
| compatible = "syscon"; |
| reg = <0x00000210 0x4>; |
| }; |
| }; |
| |
| serdes0: serdes@900000 { |
| compatible = "ti,phy-am654-serdes"; |
| reg = <0x0 0x900000 0x0 0x2000>; |
| reg-names = "serdes"; |
| #phy-cells = <2>; |
| power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; |
| clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; |
| assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; |
| assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; |
| ti,serdes-clk = <&serdes0_clk>; |
| mux-controls = <&serdes_mux 0>; |
| #clock-cells = <1>; |
| }; |
| |
| serdes1: serdes@910000 { |
| compatible = "ti,phy-am654-serdes"; |
| reg = <0x0 0x910000 0x0 0x2000>; |
| reg-names = "serdes"; |
| #phy-cells = <2>; |
| power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; |
| clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; |
| assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; |
| assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>; |
| ti,serdes-clk = <&serdes1_clk>; |
| mux-controls = <&serdes_mux 1>; |
| #clock-cells = <1>; |
| }; |
| |
| pcie0_rc: pcie@5500000 { |
| compatible = "ti,am654-pcie-rc"; |
| reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; |
| reg-names = "app", "dbics", "config", "atu"; |
| power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 |
| 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; |
| ti,syscon-pcie-id = <&pcie_devid>; |
| ti,syscon-pcie-mode = <&pcie0_mode>; |
| bus-range = <0x0 0xff>; |
| status = "disabled"; |
| device_type = "pci"; |
| num-lanes = <1>; |
| num-ob-windows = <16>; |
| num-viewport = <16>; |
| max-link-speed = <3>; |
| interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie0_intc 0>, /* INT A */ |
| <0 0 0 2 &pcie0_intc 0>, /* INT B */ |
| <0 0 0 3 &pcie0_intc 0>, /* INT C */ |
| <0 0 0 4 &pcie0_intc 0>; /* INT D */ |
| msi-map = <0x0 &gic_its 0x0 0x10000>; |
| |
| pcie0_intc: legacy-interrupt-controller@1 { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&gic500>; |
| interrupts = <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| dwc3_0: dwc3@4000000 { |
| compatible = "ti,am654-dwc3"; |
| reg = <0x0 0x4000000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x4000000 0x20000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; |
| assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; |
| assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ |
| <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ |
| |
| usb0: usb@10000 { |
| compatible = "snps,dwc3"; |
| reg = <0x10000 0x10000>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "peripheral", |
| "host", |
| "otg"; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| phys = <&usb0_phy>; |
| phy-names = "usb2-phy"; |
| snps,dis_u3_susphy_quirk; |
| }; |
| }; |
| |
| usb0_phy: phy@4100000 { |
| compatible = "ti,am654-usb2", "ti,omap-usb2"; |
| reg = <0x0 0x4100000 0x0 0x54>; |
| syscon-phy-power = <&scm_conf 0x4000>; |
| clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; |
| clock-names = "wkupclk", "refclk"; |
| #phy-cells = <0>; |
| ti,dis-chg-det-quirk; |
| }; |
| |
| dwc3_1: dwc3@4020000 { |
| compatible = "ti,am654-dwc3"; |
| reg = <0x0 0x4020000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x4020000 0x20000>; |
| interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; |
| assigned-clocks = <&k3_clks 152 2>; |
| assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ |
| |
| usb1: usb@10000 { |
| compatible = "snps,dwc3"; |
| reg = <0x10000 0x10000>; |
| interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "peripheral", |
| "host", |
| "otg"; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| phys = <&usb1_phy>; |
| phy-names = "usb2-phy"; |
| }; |
| }; |
| |
| usb1_phy: phy@4110000 { |
| compatible = "ti,am654-usb2", "ti,omap-usb2"; |
| reg = <0x0 0x4110000 0x0 0x54>; |
| syscon-phy-power = <&scm_conf 0x4020>; |
| clocks = <&k3_clks 152 0>, <&k3_clks 152 1>; |
| clock-names = "wkupclk", "refclk"; |
| #phy-cells = <0>; |
| ti,dis-chg-det-quirk; |
| }; |
| }; |