| # SPDX-License-Identifier: GPL-2.0+ |
| # |
| # Copyright (C) 2019, Pascal Linder <pascal.linder@edu.hefr.ch> |
| |
| config VENDOR_KM |
| bool |
| help |
| Selected by any KM board to have additional configurations. |
| |
| if VENDOR_KM |
| |
| menu "KM Board Setup" |
| |
| config KM_PNVRAM |
| hex "Pseudo RAM" |
| default 0x80000 |
| help |
| Start address of the pseudo non-volatile RAM for application. |
| |
| config KM_PHRAM |
| hex "Physical RAM" |
| default 0x17F000 if ARM |
| default 0x100000 if PPC |
| help |
| Start address of the physical RAM, which is the mounted /var folder. |
| |
| config KM_RESERVED_PRAM |
| hex "Reserved RAM" |
| default 0x801000 if KIRKWOOD |
| default 0x0 if MPC83xx |
| default 0x1000 if MPC85xx |
| help |
| Reserved physical RAM area at the end of memory for special purposes. |
| |
| config KM_CRAMFS_ADDR |
| hex "CRAMFS Address" |
| default 0x2400000 if KIRKWOOD |
| default 0xC00000 if MPC83xx |
| default 0x2000000 if MPC85xx |
| help |
| Start address of the CRAMFS containing the Linux kernel. |
| |
| config KM_KERNEL_ADDR |
| hex "Kernel Load Address" |
| default 0x2000000 if KIRKWOOD |
| default 0x400000 if MPC83xx |
| default 0x1000000 if MPC85xx |
| help |
| Address where to load Linux kernel in RAM. |
| |
| config KM_FDT_ADDR |
| hex "FDT Load Address" |
| default 0x23E0000 if KIRKWOOD |
| default 0xB80000 if MPC83xx |
| default 0x1F80000 if MPC85xx |
| help |
| Address where to load flattened device tree in RAM. |
| |
| config KM_CONSOLE_TTY |
| string "KM Console" |
| default "ttyS0" |
| help |
| TTY console to use on board. |
| |
| config KM_DEF_NETDEV |
| string "Default Netdevice" |
| default "eth0" |
| help |
| Default netdevice for debug interface |
| |
| config KM_COMMON_ETH_INIT |
| bool "Common Ethernet Initialization" |
| default y if KIRKWOOD || MPC83xx |
| default n if MPC85xx |
| help |
| Use the Ethernet initialization implemented in common code, which |
| detects if a Piggy board is present. |
| |
| config PIGGY_MAC_ADDRESS_OFFSET |
| int "Piggy Address Offset" |
| default 0 |
| help |
| MAC address offset for the Piggy board. |
| |
| config KM_MVEXTSW_ADDR |
| hex "Marvell Switch Address" |
| depends on MV88E6352_SWITCH |
| default 0x10 |
| help |
| Address of external Marvell switch. |
| |
| config KM_IVM_BUS |
| int "IVM I2C Bus" |
| default 1 if KIRKWOOD || MPC85xx |
| default 2 if MPC83xx |
| help |
| Identifier number of I2C bus, where the inventory EEPROM is connected to. |
| |
| config SYS_IVM_EEPROM_ADR |
| hex "IVM I2C Address" |
| default 0x50 |
| help |
| I2C address of the EEPROM containing the inventory. |
| |
| config SYS_IVM_EEPROM_MAX_LEN |
| hex "IVM Length" |
| default 0x400 |
| help |
| Maximum length of inventory in EEPROM. |
| |
| config SYS_IVM_EEPROM_PAGE_LEN |
| hex "IVM Page Size" |
| default 0x100 |
| help |
| Page size of inventory in EEPROM. |
| |
| source "board/keymile/km83xx/Kconfig" |
| source "board/keymile/kmp204x/Kconfig" |
| source "board/keymile/km_arm/Kconfig" |
| |
| endmenu |
| |
| endif |