| // SPDX-License-Identifier: BSD-2-Clause |
| /* |
| * Copyright (C) 2017 The Android Open Source Project |
| */ |
| #include <common.h> |
| #include <android_ab.h> |
| #include <android_bootloader_message.h> |
| #include <linux/err.h> |
| #include <memalign.h> |
| #include <u-boot/crc.h> |
| #include <u-boot/crc.h> |
| |
| /** |
| * Compute the CRC-32 of the bootloader control struct. |
| * |
| * Only the bytes up to the crc32_le field are considered for the CRC-32 |
| * calculation. |
| * |
| * @param[in] abc bootloader control block |
| * |
| * @return crc32 sum |
| */ |
| static uint32_t ab_control_compute_crc(struct bootloader_control *abc) |
| { |
| return crc32(0, (void *)abc, offsetof(typeof(*abc), crc32_le)); |
| } |
| |
| /** |
| * Initialize bootloader_control to the default value. |
| * |
| * It allows us to boot all slots in order from the first one. This value |
| * should be used when the bootloader message is corrupted, but not when |
| * a valid message indicates that all slots are unbootable. |
| * |
| * @param[in] abc bootloader control block |
| * |
| * @return 0 on success and a negative on error |
| */ |
| static int ab_control_default(struct bootloader_control *abc) |
| { |
| int i; |
| const struct slot_metadata metadata = { |
| .priority = 15, |
| .tries_remaining = 7, |
| .successful_boot = 0, |
| .verity_corrupted = 0, |
| .reserved = 0 |
| }; |
| |
| if (!abc) |
| return -EFAULT; |
| |
| memcpy(abc->slot_suffix, "a\0\0\0", 4); |
| abc->magic = BOOT_CTRL_MAGIC; |
| abc->version = BOOT_CTRL_VERSION; |
| abc->nb_slot = NUM_SLOTS; |
| memset(abc->reserved0, 0, sizeof(abc->reserved0)); |
| for (i = 0; i < abc->nb_slot; ++i) |
| abc->slot_info[i] = metadata; |
| |
| memset(abc->reserved1, 0, sizeof(abc->reserved1)); |
| abc->crc32_le = ab_control_compute_crc(abc); |
| |
| return 0; |
| } |
| |
| /** |
| * Load the boot_control struct from disk into newly allocated memory. |
| * |
| * This function allocates and returns an integer number of disk blocks, |
| * based on the block size of the passed device to help performing a |
| * read-modify-write operation on the boot_control struct. |
| * The boot_control struct offset (2 KiB) must be a multiple of the device |
| * block size, for simplicity. |
| * |
| * @param[in] dev_desc Device where to read the boot_control struct from |
| * @param[in] part_info Partition in 'dev_desc' where to read from, normally |
| * the "misc" partition should be used |
| * @param[out] pointer to pointer to bootloader_control data |
| * @return 0 on success and a negative on error |
| */ |
| static int ab_control_create_from_disk(struct blk_desc *dev_desc, |
| const disk_partition_t *part_info, |
| struct bootloader_control **abc) |
| { |
| ulong abc_offset, abc_blocks, ret; |
| |
| abc_offset = offsetof(struct bootloader_message_ab, slot_suffix); |
| if (abc_offset % part_info->blksz) { |
| log_err("ANDROID: Boot control block not block aligned.\n"); |
| return -EINVAL; |
| } |
| abc_offset /= part_info->blksz; |
| |
| abc_blocks = DIV_ROUND_UP(sizeof(struct bootloader_control), |
| part_info->blksz); |
| if (abc_offset + abc_blocks > part_info->size) { |
| log_err("ANDROID: boot control partition too small. Need at"); |
| log_err(" least %lu blocks but have %lu blocks.\n", |
| abc_offset + abc_blocks, part_info->size); |
| return -EINVAL; |
| } |
| *abc = malloc_cache_aligned(abc_blocks * part_info->blksz); |
| if (!*abc) |
| return -ENOMEM; |
| |
| ret = blk_dread(dev_desc, part_info->start + abc_offset, abc_blocks, |
| *abc); |
| if (IS_ERR_VALUE(ret)) { |
| log_err("ANDROID: Could not read from boot ctrl partition\n"); |
| free(*abc); |
| return -EIO; |
| } |
| |
| log_debug("ANDROID: Loaded ABC, %lu blocks\n", abc_blocks); |
| |
| return 0; |
| } |
| |
| /** |
| * Store the loaded boot_control block. |
| * |
| * Store back to the same location it was read from with |
| * ab_control_create_from_misc(). |
| * |
| * @param[in] dev_desc Device where we should write the boot_control struct |
| * @param[in] part_info Partition on the 'dev_desc' where to write |
| * @param[in] abc Pointer to the boot control struct and the extra bytes after |
| * it up to the nearest block boundary |
| * @return 0 on success and a negative on error |
| */ |
| static int ab_control_store(struct blk_desc *dev_desc, |
| const disk_partition_t *part_info, |
| struct bootloader_control *abc) |
| { |
| ulong abc_offset, abc_blocks, ret; |
| |
| abc_offset = offsetof(struct bootloader_message_ab, slot_suffix) / |
| part_info->blksz; |
| abc_blocks = DIV_ROUND_UP(sizeof(struct bootloader_control), |
| part_info->blksz); |
| ret = blk_dwrite(dev_desc, part_info->start + abc_offset, abc_blocks, |
| abc); |
| if (IS_ERR_VALUE(ret)) { |
| log_err("ANDROID: Could not write back the misc partition\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Compare two slots. |
| * |
| * The function determines slot which is should we boot from among the two. |
| * |
| * @param[in] a The first bootable slot metadata |
| * @param[in] b The second bootable slot metadata |
| * @return Negative if the slot "a" is better, positive of the slot "b" is |
| * better or 0 if they are equally good. |
| */ |
| static int ab_compare_slots(const struct slot_metadata *a, |
| const struct slot_metadata *b) |
| { |
| /* Higher priority is better */ |
| if (a->priority != b->priority) |
| return b->priority - a->priority; |
| |
| /* Higher successful_boot value is better, in case of same priority */ |
| if (a->successful_boot != b->successful_boot) |
| return b->successful_boot - a->successful_boot; |
| |
| /* Higher tries_remaining is better to ensure round-robin */ |
| if (a->tries_remaining != b->tries_remaining) |
| return b->tries_remaining - a->tries_remaining; |
| |
| return 0; |
| } |
| |
| int ab_select_slot(struct blk_desc *dev_desc, disk_partition_t *part_info) |
| { |
| struct bootloader_control *abc = NULL; |
| u32 crc32_le; |
| int slot, i, ret; |
| bool store_needed = false; |
| char slot_suffix[4]; |
| |
| ret = ab_control_create_from_disk(dev_desc, part_info, &abc); |
| if (ret < 0) { |
| /* |
| * This condition represents an actual problem with the code or |
| * the board setup, like an invalid partition information. |
| * Signal a repair mode and do not try to boot from either slot. |
| */ |
| return ret; |
| } |
| |
| crc32_le = ab_control_compute_crc(abc); |
| if (abc->crc32_le != crc32_le) { |
| log_err("ANDROID: Invalid CRC-32 (expected %.8x, found %.8x),", |
| crc32_le, abc->crc32_le); |
| log_err("re-initializing A/B metadata.\n"); |
| |
| ret = ab_control_default(abc); |
| if (ret < 0) { |
| free(abc); |
| return -ENODATA; |
| } |
| store_needed = true; |
| } |
| |
| if (abc->magic != BOOT_CTRL_MAGIC) { |
| log_err("ANDROID: Unknown A/B metadata: %.8x\n", abc->magic); |
| free(abc); |
| return -ENODATA; |
| } |
| |
| if (abc->version > BOOT_CTRL_VERSION) { |
| log_err("ANDROID: Unsupported A/B metadata version: %.8x\n", |
| abc->version); |
| free(abc); |
| return -ENODATA; |
| } |
| |
| /* |
| * At this point a valid boot control metadata is stored in abc, |
| * followed by other reserved data in the same block. We select a with |
| * the higher priority slot that |
| * - is not marked as corrupted and |
| * - either has tries_remaining > 0 or successful_boot is true. |
| * If the selected slot has a false successful_boot, we also decrement |
| * the tries_remaining until it eventually becomes unbootable because |
| * tries_remaining reaches 0. This mechanism produces a bootloader |
| * induced rollback, typically right after a failed update. |
| */ |
| |
| /* Safety check: limit the number of slots. */ |
| if (abc->nb_slot > ARRAY_SIZE(abc->slot_info)) { |
| abc->nb_slot = ARRAY_SIZE(abc->slot_info); |
| store_needed = true; |
| } |
| |
| slot = -1; |
| for (i = 0; i < abc->nb_slot; ++i) { |
| if (abc->slot_info[i].verity_corrupted || |
| !abc->slot_info[i].tries_remaining) { |
| log_debug("ANDROID: unbootable slot %d tries: %d, ", |
| i, abc->slot_info[i].tries_remaining); |
| log_debug("corrupt: %d\n", |
| abc->slot_info[i].verity_corrupted); |
| continue; |
| } |
| log_debug("ANDROID: bootable slot %d pri: %d, tries: %d, ", |
| i, abc->slot_info[i].priority, |
| abc->slot_info[i].tries_remaining); |
| log_debug("corrupt: %d, successful: %d\n", |
| abc->slot_info[i].verity_corrupted, |
| abc->slot_info[i].successful_boot); |
| |
| if (slot < 0 || |
| ab_compare_slots(&abc->slot_info[i], |
| &abc->slot_info[slot]) < 0) { |
| slot = i; |
| } |
| } |
| |
| if (slot >= 0 && !abc->slot_info[slot].successful_boot) { |
| log_err("ANDROID: Attempting slot %c, tries remaining %d\n", |
| BOOT_SLOT_NAME(slot), |
| abc->slot_info[slot].tries_remaining); |
| abc->slot_info[slot].tries_remaining--; |
| store_needed = true; |
| } |
| |
| if (slot >= 0) { |
| /* |
| * Legacy user-space requires this field to be set in the BCB. |
| * Newer releases load this slot suffix from the command line |
| * or the device tree. |
| */ |
| memset(slot_suffix, 0, sizeof(slot_suffix)); |
| slot_suffix[0] = BOOT_SLOT_NAME(slot); |
| if (memcmp(abc->slot_suffix, slot_suffix, |
| sizeof(slot_suffix))) { |
| memcpy(abc->slot_suffix, slot_suffix, |
| sizeof(slot_suffix)); |
| store_needed = true; |
| } |
| } |
| |
| if (store_needed) { |
| abc->crc32_le = ab_control_compute_crc(abc); |
| ab_control_store(dev_desc, part_info, abc); |
| } |
| free(abc); |
| |
| if (slot < 0) |
| return -EINVAL; |
| |
| return slot; |
| } |