| /* |
| * (C) Copyright 2003 |
| * Texas Instruments. |
| * Kshitij Gupta <kshitij@ti.com> |
| * Configuation settings for the TI OMAP Innovator board. |
| * |
| * (C) Copyright 2004 |
| * ARM Ltd. |
| * Philippe Robin, <philippe.robin@arm.com> |
| * Configuration for Versatile PB. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ |
| #define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ |
| #define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ |
| |
| |
| #define CFG_MEMTEST_START 0x100000 |
| #define CFG_MEMTEST_END 0x10000000 |
| #define CFG_HZ (1000000 / 256) |
| #define CFG_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */ |
| |
| #define CFG_TIMER_INTERVAL 10000 |
| #define CFG_TIMER_RELOAD (CFG_TIMER_INTERVAL >> 4) /* Divide by 16 */ |
| #define CFG_TIMER_CTRL 0x84 /* Enable, Clock / 16 */ |
| |
| /* |
| * control registers |
| */ |
| #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ |
| |
| /* |
| * System controller bit assignment |
| */ |
| #define VERSATILE_REFCLK 0 |
| #define VERSATILE_TIMCLK 1 |
| |
| #define VERSATILE_TIMER1_EnSel 15 |
| #define VERSATILE_TIMER2_EnSel 17 |
| #define VERSATILE_TIMER3_EnSel 19 |
| #define VERSATILE_TIMER4_EnSel 21 |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ |
| /* |
| * Size of malloc() pool |
| */ |
| #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) |
| #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| |
| /* |
| * Hardware drivers |
| */ |
| |
| #define CONFIG_DRIVER_SMC91111 |
| #define CONFIG_SMC_USE_32_BIT |
| #define CONFIG_SMC91111_BASE 0x10010000 |
| #undef CONFIG_SMC91111_EXT_PHY |
| |
| /* |
| * NS16550 Configuration |
| */ |
| #define CFG_PL011_SERIAL |
| #define CONFIG_CONS_INDEX 0 |
| #define CONFIG_BAUDRATE 38400 |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| #define CFG_SERIAL0 0x101F1000 |
| #define CFG_SERIAL1 0x101F2000 |
| |
| #define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY) |
| |
| /*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */ |
| |
| #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT |
| |
| /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
| #include <cmd_confdefs.h> |
| |
| #define CONFIG_BOOTDELAY 2 |
| #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0" |
| /*#define CONFIG_BOOTCOMMAND "bootp ; bootm" */ |
| |
| /* |
| * Static configuration when assigning fixed address |
| */ |
| /*#define CONFIG_NETMASK 255.255.255.0 /--* talk on MY local net */ |
| /*#define CONFIG_IPADDR xx.xx.xx.xx /--* static IP I currently own */ |
| /*#define CONFIG_SERVERIP xx.xx.xx.xx /--* current IP of my dev pc */ |
| #define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */ |
| |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_PROMPT "Versatile # " /* Monitor Command Prompt */ |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| /* Print Buffer Size */ |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
| #define CFG_LOAD_ADDR 0x7fc0 /* default load address */ |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ |
| |
| #define CFG_FLASH_BASE 0x34000000 |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| #define CFG_ENV_IS_NOWHERE |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define PHYS_FLASH_SIZE 0x34000000 /* 64MB */ |
| /* timeout values are in ticks */ |
| #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ |
| #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ |
| #define CFG_MAX_FLASH_SECT 128 |
| #define CFG_ENV_SIZE 32768 |
| |
| #define PHYS_FLASH_1 (CFG_FLASH_BASE) |
| |
| #endif /* __CONFIG_H */ |