| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2016 Google, Inc |
| * |
| * Modified from coreboot |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <asm/intel_regs.h> |
| #include <asm/io.h> |
| #include <asm/arch/pch.h> |
| #include <linux/delay.h> |
| |
| #define IOBP_RETRY 1000 |
| |
| /* IO Buffer Programming */ |
| #define IOBPIRI 0x2330 |
| #define IOBPD 0x2334 |
| #define IOBPS 0x2338 |
| #define IOBPS_READY 0x0001 |
| #define IOBPS_TX_MASK 0x0006 |
| #define IOBPS_MASK 0xff00 |
| #define IOBPS_READ 0x0600 |
| #define IOBPS_WRITE 0x0700 |
| #define IOBPU 0x233a |
| #define IOBPU_MAGIC 0xf000 |
| #define IOBP_PCICFG_READ 0x0400 |
| #define IOBP_PCICFG_WRITE 0x0500 |
| |
| static inline int iobp_poll(void) |
| { |
| unsigned try; |
| |
| for (try = IOBP_RETRY; try > 0; try--) { |
| u16 status = readw(RCB_REG(IOBPS)); |
| if ((status & IOBPS_READY) == 0) |
| return 1; |
| udelay(10); |
| } |
| |
| printf("IOBP: timeout waiting for transaction to complete\n"); |
| return 0; |
| } |
| |
| int pch_iobp_trans_start(u32 address, int op) |
| { |
| if (!iobp_poll()) |
| return 0; |
| |
| /* Set the address */ |
| writel(address, RCB_REG(IOBPIRI)); |
| |
| /* READ OPCODE */ |
| clrsetbits_le16(RCB_REG(IOBPS), IOBPS_MASK, op); |
| |
| return 1; |
| } |
| |
| int pch_iobp_trans_finish(void) |
| { |
| u16 status; |
| |
| /* Undocumented magic */ |
| writew(IOBPU_MAGIC, RCB_REG(IOBPU)); |
| |
| /* Set ready bit */ |
| setbits_le16(RCB_REG(IOBPS), IOBPS_READY); |
| |
| if (!iobp_poll()) |
| return 1; |
| |
| /* Check for successful transaction */ |
| status = readw(RCB_REG(IOBPS)); |
| if (status & IOBPS_TX_MASK) |
| return 1; |
| |
| return 0; |
| } |
| |
| u32 pch_iobp_read(u32 address) |
| { |
| if (!pch_iobp_trans_start(address, IOBPS_READ)) |
| return 0; |
| if (pch_iobp_trans_finish()) { |
| printf("IOBP: read 0x%08x failed\n", address); |
| return 0; |
| } |
| |
| /* Read IOBP data */ |
| return readl(RCB_REG(IOBPD)); |
| } |
| |
| int pch_iobp_write(u32 address, u32 data) |
| { |
| if (!pch_iobp_trans_start(address, IOBPS_WRITE)) |
| return -EIO; |
| |
| writel(data, RCB_REG(IOBPD)); |
| |
| if (pch_iobp_trans_finish()) { |
| printf("IOBP: write 0x%08x failed\n", address); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| int pch_iobp_update(u32 address, u32 andvalue, u32 orvalue) |
| { |
| u32 data = pch_iobp_read(address); |
| |
| /* Update the data */ |
| data &= andvalue; |
| data |= orvalue; |
| |
| return pch_iobp_write(address, data); |
| } |
| |
| int pch_iobp_exec(u32 addr, u16 op_code, u8 route_id, u32 *data, u8 *resp) |
| { |
| if (!data || !resp) |
| return 0; |
| |
| *resp = -1; |
| if (!iobp_poll()) |
| return -EIO; |
| |
| writel(addr, RCB_REG(IOBPIRI)); |
| clrsetbits_le16(RCB_REG(IOBPS), 0xff00, op_code); |
| writew(IOBPU_MAGIC | route_id, RCB_REG(IOBPU)); |
| |
| writel(*data, RCB_REG(IOBPD)); |
| /* Set IOBPS[0] to trigger IOBP transaction*/ |
| setbits_le16(RCB_REG(IOBPS), 1); |
| |
| if (!iobp_poll()) |
| return -EIO; |
| |
| *resp = (readw(RCB_REG(IOBPS)) & IOBPS_TX_MASK) >> 1; |
| *data = readl(RCB_REG(IOBPD)); |
| |
| return 0; |
| } |