blob: a063b221cd1fee852c78ffee32651c2341dd82ba [file] [log] [blame]
config AHCI
bool "Support SATA controllers with driver model"
depends on DM
help
This enables a uclass for disk controllers in U-Boot. Various driver
types can use this, such as AHCI/SATA. It does not provide any standard
operations at present. The block device interface has not been converted
to driver model.
config SATA
bool "Support SATA controllers"
help
This enables support for SATA (Serial Advanced Technology
Attachment), a serial bus standard for connecting to hard drives and
other storage devices.
SATA replaces PATA (originally just ATA), which stands for Parallel AT
Attachment, where AT refers to an IBM AT (Advanced Technology)
computer released in 1984.
See also CMD_SATA which provides command-line support.
config LIBATA
bool
help
Select this to build and link the libata helper functions.
config SCSI_AHCI
bool "Enable SCSI interface to SATA devices"
select LIBATA
help
Enable this to allow interfacing SATA devices via the SCSI layer.
menu "SATA/SCSI device support"
config AHCI_PCI
bool "Support for PCI-based AHCI controller"
depends on PCI
depends on DM_SCSI
help
Enables support for the PCI-based AHCI controller.
if AHCI
config SPL_AHCI_PCI
bool "Support for PCI-based AHCI controller for SPL"
depends on SPL
depends on SPL_PCI
depends on SPL_SATA && DM_SCSI
config DWC_AHCI
bool "Enable Synopsys DWC AHCI driver support"
select SCSI_AHCI
select PHY
depends on DM_SCSI
help
Enable this driver to support Sata devices through
Synopsys DWC AHCI module.
config DWC_AHSATA
bool "Enable DWC AHSATA driver support"
select LIBATA
depends on BLK
help
Enable this driver to support the DWC AHSATA SATA controller found
in i.MX5 and i.MX6 SoCs.
config DWC_AHSATA_AHCI
bool "Enable DWC AHSATA AHCI driver support"
depends on DWC_AHSATA
default y
help
Enable this option unless you need your private ahci implementation
config MTK_AHCI
bool "Enable Mediatek AHCI driver support"
help
Enable this driver to support Sata devices through
Mediatek AHCI controller (e.g. MT7622).
config AHCI_MVEBU
bool "Marvell EBU AHCI SATA support"
depends on ARCH_MVEBU || ARCH_OCTEON
select SCSI_AHCI
select DM_SCSI
help
This option enables support for the Marvell EBU SoC's
onboard AHCI SATA.
If unsure, say N.
config SUNXI_AHCI
bool "Enable Allwinner SATA driver support"
default y if ARCH_SUNXI
help
Enable this driver to support the SATA controllers found in the
Allwinner A10, A20 and R40 SoCs.
endif # AHCI
if SATA
config SATA_CEVA
bool "Ceva Sata controller"
depends on AHCI
depends on DM_SCSI
help
This option enables Ceva Sata controller hard IP available on Xilinx
ZynqMP. Support up to 2 external devices. Compliant with SATA 3.1 and
AHCI 1.3 specifications with hot-plug detect feature.
config FSL_SATA
bool "Enable Freescale SATA controller driver support"
depends on PPC
select AHCI
select LIBATA
imply LBA48
help
Enable this driver to support the SATA controller found in
some Freescale PowerPC SoCs.
config FSL_SATA_V2
bool "Enable support for V2 of the Freescale SATA controller"
depends on FSL_SATA
help
Enable support for V2 of this controller, rather than V1.
config SATA_MV
bool "Enable Marvell SATA controller driver support"
select AHCI
select LIBATA
help
Enable this driver to support the SATA controller found in
some Marvell SoCs.
config SATA_SIL
bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
select AHCI
select LIBATA
help
Enable this driver to support the SIL3131, SIL3132 and SIL3124
SATA controllers.
config SYS_SATA_MAX_DEVICE
int "Maximum number of SATA devices"
depends on !AHCI || FSL_SATA || SATA_MV
help
Sets the maximum number of SATA devices which can be supported
by U-Boot.
This is only partially converted to driver model. See sata_bread()
for example, which shows where the conversion needs to be completed.
endif # SATA
endmenu