| ======================================== |
| Renesas Technology R0P7785LC0011RL board |
| ======================================== |
| |
| This board specification: |
| ========================= |
| |
| The R0P7785LC0011RL(board config name:sh7785lcr) has the following device: |
| |
| - SH7785 (SH-4A) |
| - DDR2-SDRAM 512MB |
| - NOR Flash 64MB |
| - 2D Graphic controller |
| - SATA controller |
| - Ethernet controller |
| - USB host/peripheral controller |
| - SD controller |
| - I2C controller |
| - RTC |
| |
| This board has 2 physical memory maps. It can be changed with DIP switch(S2-5). |
| |
| phys address | S2-5 = OFF | S2-5 = ON |
| -------------------------------+---------------+--------------- |
| 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash |
| 0x04000000 - 0x05ffffff(CS1) | PLD | PLD |
| 0x06000000 - 0x07ffffff(CS1) | reserved | I2C |
| 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM |
| 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM |
| 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 |
| 0x14000000 - 0x17ffffff(CS5) | I2C | USB |
| 0x18000000 - 0x1bffffff(CS6) | reserved | SD |
| 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) |
| |
| |
| This board specific command: |
| ============================ |
| |
| This board has the following its specific command: |
| |
| - hwtest |
| - printmac |
| - setmac |
| |
| |
| 1. hwtest |
| |
| This is self-check command. This command has the following options: |
| |
| - all : test all hardware |
| - pld : output PLD version |
| - led : turn on LEDs |
| - dipsw : test DIP switch |
| - sm107 : output SM107 version |
| - net : check RTL8110 ID |
| - sata : check SiI3512 ID |
| - net : output PCI slot device ID |
| |
| i.e) |
| => hwtest led |
| turn on LEDs 3, 5, 7, 9 |
| turn on LEDs 4, 6, 8, 10 |
| |
| => hwtest net |
| Ethernet OK |
| |
| |
| 2. printmac |
| |
| This command outputs MAC address of this board. |
| |
| i.e) |
| => printmac |
| MAC = 00:00:87:**:**:** |
| |
| |
| 3. setmac |
| |
| This command writes MAC address of this board. |
| |
| i.e) |
| => setmac 00:00:87:**:**:** |