blob: 3fdfcc8a11ae87cae50f0408a349eea93f6ce025 [file] [log] [blame]
/*
* dts file for Xilinx ZynqMP zc1751-xm016-dc2
*
* (C) Copyright 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk.dtsi"
/ {
model = "ZynqMP zc1751-xm016-dc2 RevA";
compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
aliases {
can0 = &can0;
can1 = &can1;
ethernet0 = &gem2;
gpio0 = &gpio;
i2c0 = &i2c0;
rtc0 = &rtc;
serial0 = &uart0;
serial1 = &uart1;
spi0 = &spi0;
spi1 = &spi1;
usb0 = &usb1;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
/* fpd_dma clk 667MHz, lpd_dma 500MHz */
&fpd_dma_chan1 {
status = "okay";
xlnx,include-sg; /* for testing purpose */
xlnx,overfetch; /* for testing purpose */
xlnx,ratectrl = <0>; /* for testing purpose */
xlnx,src-issue = <31>;
};
&fpd_dma_chan2 {
status = "okay";
xlnx,ratectrl = <100>; /* for testing purpose */
xlnx,src-issue = <4>; /* for testing purpose */
};
&fpd_dma_chan3 {
status = "okay";
};
&fpd_dma_chan4 {
status = "okay";
xlnx,include-sg; /* for testing purpose */
};
&fpd_dma_chan5 {
status = "okay";
};
&fpd_dma_chan6 {
status = "okay";
xlnx,include-sg; /* for testing purpose */
};
&fpd_dma_chan7 {
status = "okay";
};
&fpd_dma_chan8 {
status = "okay";
xlnx,include-sg; /* for testing purpose */
};
&gem2 {
status = "okay";
local-mac-address = [00 0a 35 00 02 90];
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
phy0: phy@5 {
reg = <5>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
};
};
&gpio {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
tca6416_u26: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
/* IRQ not connected */
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
&nand0 {
status = "okay";
arasan,has-mdma;
num-cs = <2>;
partition@0 { /* for testing purpose */
label = "nand-fsbl-uboot";
reg = <0x0 0x0 0x400000>;
};
partition@1 { /* for testing purpose */
label = "nand-linux";
reg = <0x0 0x400000 0x1400000>;
};
partition@2 { /* for testing purpose */
label = "nand-device-tree";
reg = <0x0 0x1800000 0x400000>;
};
partition@3 { /* for testing purpose */
label = "nand-rootfs";
reg = <0x0 0x1C00000 0x1400000>;
};
partition@4 { /* for testing purpose */
label = "nand-bitstream";
reg = <0x0 0x3000000 0x400000>;
};
partition@5 { /* for testing purpose */
label = "nand-misc";
reg = <0x0 0x3400000 0xFCC00000>;
};
partition@6 { /* for testing purpose */
label = "nand1-fsbl-uboot";
reg = <0x1 0x0 0x400000>;
};
partition@7 { /* for testing purpose */
label = "nand1-linux";
reg = <0x1 0x400000 0x1400000>;
};
partition@8 { /* for testing purpose */
label = "nand1-device-tree";
reg = <0x1 0x1800000 0x400000>;
};
partition@9 { /* for testing purpose */
label = "nand1-rootfs";
reg = <0x1 0x1C00000 0x1400000>;
};
partition@10 { /* for testing purpose */
label = "nand1-bitstream";
reg = <0x1 0x3000000 0x400000>;
};
partition@11 { /* for testing purpose */
label = "nand1-misc";
reg = <0x1 0x3400000 0xFCC00000>;
};
};
&rtc {
status = "okay";
};
&spi0 {
status = "okay";
num-cs = <1>;
spi0_flash0: spi0_flash0@0 {
compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
spi0_flash0@00000000 {
label = "spi0_flash0";
reg = <0x0 0x100000>;
};
};
};
&spi1 {
status = "okay";
num-cs = <1>;
spi1_flash0: spi1_flash0@0 {
compatible = "mtd_dataflash";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
spi1_flash0@00000000 {
label = "spi1_flash0";
reg = <0x0 0x84000>;
};
};
};
/* ULPI SMSC USB3320 */
&usb1 {
status = "okay";
dr_mode = "host";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};