| // SPDX-License-Identifier: GPL-2.0+ |
| // (C) 2022 Pali Rohár <pali@kernel.org> |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <asm/gpio.h> |
| #include <linux/log2.h> |
| |
| enum commands_e { |
| CMD_GET_STATUS_WORD = 0x01, |
| CMD_GENERAL_CONTROL = 0x02, |
| |
| /* available if STS_FEATURES_SUPPORTED bit set in status word */ |
| CMD_GET_FEATURES = 0x10, |
| |
| /* available if FEAT_EXT_CMDS bit is set in features */ |
| CMD_GET_EXT_STATUS_DWORD = 0x11, |
| |
| /* available if FEAT_EXT_CMDS and FEAT_PERIPH_MCU bits are set in featurs */ |
| CMD_EXT_CONTROL = 0x12, |
| CMD_GET_EXT_CONTROL_STATUS = 0x13, |
| }; |
| |
| /* CMD_GET_STATUS_WORD */ |
| enum sts_word_e { |
| STS_MCU_TYPE_MASK = GENMASK(1, 0), |
| STS_MCU_TYPE_STM32 = 0, |
| STS_MCU_TYPE_GD32 = 1, |
| STS_MCU_TYPE_MKL = 2, |
| STS_FEATURES_SUPPORTED = BIT(2), |
| STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3), |
| STS_CARD_DET = BIT(4), |
| STS_MSATA_IND = BIT(5), |
| STS_USB30_OVC = BIT(6), |
| STS_USB31_OVC = BIT(7), |
| STS_USB30_PWRON = BIT(8), |
| STS_USB31_PWRON = BIT(9), |
| STS_ENABLE_4V5 = BIT(10), |
| STS_BUTTON_MODE = BIT(11), |
| STS_BUTTON_PRESSED = BIT(12), |
| STS_BUTTON_COUNTER_MASK = GENMASK(15, 13) |
| }; |
| |
| /* CMD_GENERAL_CONTROL */ |
| enum ctl_byte_e { |
| CTL_LIGHT_RST = BIT(0), |
| CTL_HARD_RST = BIT(1), |
| /*CTL_RESERVED = BIT(2),*/ |
| CTL_USB30_PWRON = BIT(3), |
| CTL_USB31_PWRON = BIT(4), |
| CTL_ENABLE_4V5 = BIT(5), |
| CTL_BUTTON_MODE = BIT(6), |
| CTL_BOOTLOADER = BIT(7) |
| }; |
| |
| /* CMD_GET_FEATURES */ |
| enum features_e { |
| FEAT_PERIPH_MCU = BIT(0), |
| FEAT_EXT_CMDS = BIT(1), |
| }; |
| |
| struct turris_omnia_mcu_info { |
| u16 features; |
| }; |
| |
| static int turris_omnia_mcu_get_function(struct udevice *dev, uint offset) |
| { |
| struct turris_omnia_mcu_info *info = dev_get_plat(dev); |
| |
| switch (offset) { |
| /* bank 0 */ |
| case 0 ... 15: |
| switch (offset) { |
| case ilog2(STS_USB30_PWRON): |
| case ilog2(STS_USB31_PWRON): |
| case ilog2(STS_ENABLE_4V5): |
| case ilog2(STS_BUTTON_MODE): |
| return GPIOF_OUTPUT; |
| default: |
| return GPIOF_INPUT; |
| } |
| |
| /* bank 1 - supported only when FEAT_EXT_CMDS is set */ |
| case (16 + 0) ... (16 + 31): |
| if (!(info->features & FEAT_EXT_CMDS)) |
| return -EINVAL; |
| return GPIOF_INPUT; |
| |
| /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ |
| case (16 + 32 + 0) ... (16 + 32 + 15): |
| if (!(info->features & FEAT_EXT_CMDS)) |
| return -EINVAL; |
| if (!(info->features & FEAT_PERIPH_MCU)) |
| return -EINVAL; |
| return GPIOF_OUTPUT; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int turris_omnia_mcu_get_value(struct udevice *dev, uint offset) |
| { |
| struct turris_omnia_mcu_info *info = dev_get_plat(dev); |
| u8 val16[2]; |
| u8 val32[4]; |
| int ret; |
| |
| switch (offset) { |
| /* bank 0 */ |
| case 0 ... 15: |
| ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val16, 2); |
| if (ret) |
| return ret; |
| return ((((u16)val16[1] << 8) | val16[0]) >> offset) & 0x1; |
| |
| /* bank 1 - supported only when FEAT_EXT_CMDS is set */ |
| case (16 + 0) ... (16 + 31): |
| if (!(info->features & FEAT_EXT_CMDS)) |
| return -EINVAL; |
| ret = dm_i2c_read(dev, CMD_GET_EXT_STATUS_DWORD, val32, 4); |
| if (ret) |
| return ret; |
| return ((((u32)val32[3] << 24) | ((u32)val32[2] << 16) | |
| ((u32)val32[1] << 8) | val32[0]) >> (offset - 16)) & 0x1; |
| |
| /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ |
| case (16 + 32 + 0) ... (16 + 32 + 15): |
| if (!(info->features & FEAT_EXT_CMDS)) |
| return -EINVAL; |
| if (!(info->features & FEAT_PERIPH_MCU)) |
| return -EINVAL; |
| ret = dm_i2c_read(dev, CMD_GET_EXT_CONTROL_STATUS, val16, 2); |
| if (ret) |
| return ret; |
| return ((((u16)val16[1] << 8) | val16[0]) >> (offset - 16 - 32)) & 0x1; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int turris_omnia_mcu_set_value(struct udevice *dev, uint offset, int value) |
| { |
| struct turris_omnia_mcu_info *info = dev_get_plat(dev); |
| u8 val16[2]; |
| u8 val32[4]; |
| |
| switch (offset) { |
| /* bank 0 */ |
| case 0 ... 15: |
| switch (offset) { |
| case ilog2(STS_USB30_PWRON): |
| val16[1] = CTL_USB30_PWRON; |
| break; |
| case ilog2(STS_USB31_PWRON): |
| val16[1] = CTL_USB31_PWRON; |
| break; |
| case ilog2(STS_ENABLE_4V5): |
| val16[1] = CTL_ENABLE_4V5; |
| break; |
| case ilog2(STS_BUTTON_MODE): |
| val16[1] = CTL_BUTTON_MODE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| val16[0] = value ? val16[1] : 0; |
| return dm_i2c_write(dev, CMD_GENERAL_CONTROL, val16, sizeof(val16)); |
| |
| /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ |
| case (16 + 32 + 0) ... (16 + 32 + 15): |
| if (!(info->features & FEAT_EXT_CMDS)) |
| return -EINVAL; |
| if (!(info->features & FEAT_PERIPH_MCU)) |
| return -EINVAL; |
| val32[3] = BIT(offset - 16 - 32) >> 8; |
| val32[2] = BIT(offset - 16 - 32) & 0xff; |
| val32[1] = value ? val32[3] : 0; |
| val32[0] = value ? val32[2] : 0; |
| return dm_i2c_write(dev, CMD_EXT_CONTROL, val32, sizeof(val32)); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int turris_omnia_mcu_direction_input(struct udevice *dev, uint offset) |
| { |
| int ret; |
| |
| ret = turris_omnia_mcu_get_function(dev, offset); |
| if (ret < 0) |
| return ret; |
| else if (ret != GPIOF_INPUT) |
| return -EOPNOTSUPP; |
| |
| return 0; |
| } |
| |
| static int turris_omnia_mcu_direction_output(struct udevice *dev, uint offset, int value) |
| { |
| int ret; |
| |
| ret = turris_omnia_mcu_get_function(dev, offset); |
| if (ret < 0) |
| return ret; |
| else if (ret != GPIOF_OUTPUT) |
| return -EOPNOTSUPP; |
| |
| return turris_omnia_mcu_set_value(dev, offset, value); |
| } |
| |
| static int turris_omnia_mcu_xlate(struct udevice *dev, struct gpio_desc *desc, |
| struct ofnode_phandle_args *args) |
| { |
| uint bank, gpio, flags, offset; |
| int ret; |
| |
| if (args->args_count != 3) |
| return -EINVAL; |
| |
| bank = args->args[0]; |
| gpio = args->args[1]; |
| flags = args->args[2]; |
| |
| switch (bank) { |
| case 0: |
| if (gpio >= 16) |
| return -EINVAL; |
| offset = gpio; |
| break; |
| case 1: |
| if (gpio >= 32) |
| return -EINVAL; |
| offset = 16 + gpio; |
| break; |
| case 2: |
| if (gpio >= 16) |
| return -EINVAL; |
| offset = 16 + 32 + gpio; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = turris_omnia_mcu_get_function(dev, offset); |
| if (ret < 0) |
| return ret; |
| |
| desc->offset = offset; |
| desc->flags = gpio_flags_xlate(flags); |
| |
| return 0; |
| } |
| |
| static const struct dm_gpio_ops turris_omnia_mcu_ops = { |
| .direction_input = turris_omnia_mcu_direction_input, |
| .direction_output = turris_omnia_mcu_direction_output, |
| .get_value = turris_omnia_mcu_get_value, |
| .set_value = turris_omnia_mcu_set_value, |
| .get_function = turris_omnia_mcu_get_function, |
| .xlate = turris_omnia_mcu_xlate, |
| }; |
| |
| static int turris_omnia_mcu_probe(struct udevice *dev) |
| { |
| struct turris_omnia_mcu_info *info = dev_get_plat(dev); |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| u16 status; |
| u8 val[2]; |
| int ret; |
| |
| ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val, 2); |
| if (ret) { |
| printf("Error: turris_omnia_mcu CMD_GET_STATUS_WORD failed: %d\n", ret); |
| return ret; |
| } |
| |
| status = ((u16)val[1] << 8) | val[0]; |
| |
| if (status & STS_FEATURES_SUPPORTED) { |
| ret = dm_i2c_read(dev, CMD_GET_FEATURES, val, 2); |
| if (ret) { |
| printf("Error: turris_omnia_mcu CMD_GET_FEATURES failed: %d\n", ret); |
| return ret; |
| } |
| info->features = ((u16)val[1] << 8) | val[0]; |
| } |
| |
| uc_priv->bank_name = "mcu_"; |
| |
| if ((info->features & FEAT_EXT_CMDS) && (info->features & FEAT_PERIPH_MCU)) |
| uc_priv->gpio_count = 16 + 32 + 16; |
| else if (info->features & FEAT_EXT_CMDS) |
| uc_priv->gpio_count = 16 + 32; |
| else |
| uc_priv->gpio_count = 16; |
| |
| return 0; |
| } |
| |
| static const struct udevice_id turris_omnia_mcu_ids[] = { |
| { .compatible = "cznic,turris-omnia-mcu" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(turris_omnia_mcu) = { |
| .name = "turris-omnia-mcu", |
| .id = UCLASS_GPIO, |
| .ops = &turris_omnia_mcu_ops, |
| .probe = turris_omnia_mcu_probe, |
| .plat_auto = sizeof(struct turris_omnia_mcu_info), |
| .of_match = turris_omnia_mcu_ids, |
| }; |