| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Microchip I2C controller driver |
| * |
| * Copyright (C) 2021-2022 Microchip Technology Inc. |
| * Padmarao Begari <padmarao.begari@microchip.com> |
| * Conor Dooley <conor.dooley@microchip.com> |
| */ |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <asm/io.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| |
| #define MICROCHIP_I2C_TIMEOUT (1000 * 60) |
| |
| #define MPFS_I2C_CTRL (0x00) |
| #define CTRL_CR0 (0x00) |
| #define CTRL_CR1 (0x01) |
| #define CTRL_AA BIT(2) |
| #define CTRL_SI BIT(3) |
| #define CTRL_STO BIT(4) |
| #define CTRL_STA BIT(5) |
| #define CTRL_ENS1 BIT(6) |
| #define CTRL_CR2 (0x07) |
| #define MPFS_I2C_STATUS (0x04) |
| #define STATUS_BUS_ERROR (0x00) |
| #define STATUS_M_START_SENT (0x08) |
| #define STATUS_M_REPEATED_START_SENT (0x10) |
| #define STATUS_M_SLAW_ACK (0x18) |
| #define STATUS_M_SLAW_NACK (0x20) |
| #define STATUS_M_TX_DATA_ACK (0x28) |
| #define STATUS_M_TX_DATA_NACK (0x30) |
| #define STATUS_M_ARB_LOST (0x38) |
| #define STATUS_M_SLAR_ACK (0x40) |
| #define STATUS_M_SLAR_NACK (0x48) |
| #define STATUS_M_RX_DATA_ACKED (0x50) |
| #define STATUS_M_RX_DATA_NACKED (0x58) |
| #define STATUS_S_SLAW_ACKED (0x60) |
| #define STATUS_S_ARB_LOST_SLAW_ACKED (0x68) |
| #define STATUS_S_GENERAL_CALL_ACKED (0x70) |
| #define STATUS_S_ARB_LOST_GENERAL_CALL_ACKED (0x78) |
| #define STATUS_S_RX_DATA_ACKED (0x80) |
| #define STATUS_S_RX_DATA_NACKED (0x88) |
| #define STATUS_S_GENERAL_CALL_RX_DATA_ACKED (0x90) |
| #define STATUS_S_GENERAL_CALL_RX_DATA_NACKED (0x98) |
| #define STATUS_S_RX_STOP (0xA0) |
| #define STATUS_S_SLAR_ACKED (0xA8) |
| #define STATUS_S_ARB_LOST_SLAR_ACKED (0xB0) |
| #define STATUS_S_TX_DATA_ACK (0xb8) |
| #define STATUS_S_TX_DATA_NACK (0xC0) |
| #define STATUS_LAST_DATA_ACK (0xC8) |
| #define STATUS_M_SMB_MASTER_RESET (0xD0) |
| #define STATUS_S_SCL_LOW_TIMEOUT (0xD8) |
| #define STATUS_NO_STATE_INFO (0xF8) |
| #define MPFS_I2C_DATA (0x08) |
| #define MPFS_I2C_SLAVE0_ADDR (0x0c) |
| #define MPFS_I2C_SMBUS (0x10) |
| #define MPFS_I2C_FREQ (0x14) |
| #define MPFS_I2C_GLITCHREG (0x18) |
| #define MPFS_I2C_SLAVE1_ADDR (0x1c) |
| |
| #define PCLK_DIV_256 ((0 << CTRL_CR0) | (0 << CTRL_CR1) | (0 << CTRL_CR2)) |
| #define PCLK_DIV_224 ((1 << CTRL_CR0) | (0 << CTRL_CR1) | (0 << CTRL_CR2)) |
| #define PCLK_DIV_192 ((0 << CTRL_CR0) | (1 << CTRL_CR1) | (0 << CTRL_CR2)) |
| #define PCLK_DIV_160 ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (0 << CTRL_CR2)) |
| #define PCLK_DIV_960 ((0 << CTRL_CR0) | (0 << CTRL_CR1) | (1 << CTRL_CR2)) |
| #define PCLK_DIV_120 ((1 << CTRL_CR0) | (0 << CTRL_CR1) | (1 << CTRL_CR2)) |
| #define PCLK_DIV_60 ((0 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) |
| #define BCLK_DIV_8 ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) |
| #define CLK_MASK ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) |
| |
| /* |
| * mpfs_i2c_bus - I2C bus context |
| * @base: pointer to register struct |
| * @msg_len: number of bytes transferred in msg |
| * @msg_err: error code for completed message |
| * @i2c_clk: clock reference for i2c input clock |
| * @clk_rate: current i2c bus clock rate |
| * @buf: ptr to msg buffer for easier use. |
| * @addr: i2c address. |
| * @isr_status: cached copy of local ISR status. |
| */ |
| struct mpfs_i2c_bus { |
| void __iomem *base; |
| size_t msg_len; |
| int msg_err; |
| struct clk i2c_clk; |
| u32 clk_rate; |
| u8 *buf; |
| u8 addr; |
| u32 isr_status; |
| }; |
| |
| static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg) |
| { |
| return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0); |
| } |
| |
| static void mpfs_i2c_int_clear(struct mpfs_i2c_bus *bus) |
| { |
| u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| ctrl &= ~CTRL_SI; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| } |
| |
| static void mpfs_i2c_core_disable(struct mpfs_i2c_bus *bus) |
| { |
| u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| ctrl &= ~CTRL_ENS1; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| } |
| |
| static void mpfs_i2c_core_enable(struct mpfs_i2c_bus *bus) |
| { |
| u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| ctrl |= CTRL_ENS1; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| } |
| |
| static void mpfs_i2c_reset(struct mpfs_i2c_bus *bus) |
| { |
| mpfs_i2c_core_disable(bus); |
| mpfs_i2c_core_enable(bus); |
| } |
| |
| static inline void mpfs_i2c_stop(struct mpfs_i2c_bus *bus) |
| { |
| u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| ctrl |= CTRL_STO; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| } |
| |
| static inline int mpfs_generate_divisor(u32 rate, u8 *code) |
| { |
| int ret = 0; |
| |
| if (rate >= 960) |
| *code = PCLK_DIV_960; |
| else if (rate >= 256) |
| *code = PCLK_DIV_256; |
| else if (rate >= 224) |
| *code = PCLK_DIV_224; |
| else if (rate >= 192) |
| *code = PCLK_DIV_192; |
| else if (rate >= 160) |
| *code = PCLK_DIV_160; |
| else if (rate >= 120) |
| *code = PCLK_DIV_120; |
| else if (rate >= 60) |
| *code = PCLK_DIV_60; |
| else if (rate >= 8) |
| *code = BCLK_DIV_8; |
| else |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| static int mpfs_i2c_init(struct mpfs_i2c_bus *bus, struct udevice *dev) |
| { |
| u32 clk_rate, divisor; |
| u8 clkval, ctrl; |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &bus->i2c_clk); |
| if (ret) |
| return -EINVAL; |
| |
| ret = clk_enable(&bus->i2c_clk); |
| if (ret) |
| return ret; |
| |
| clk_rate = clk_get_rate(&bus->i2c_clk); |
| if (!clk_rate) |
| return -EINVAL; |
| |
| divisor = clk_rate / bus->clk_rate; |
| |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| ctrl &= ~CLK_MASK; |
| |
| ret = mpfs_generate_divisor(divisor, &clkval); |
| if (ret) |
| return -EINVAL; |
| |
| ctrl |= clkval; |
| |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| /* Reset I2C core */ |
| mpfs_i2c_reset(bus); |
| |
| return 0; |
| } |
| |
| static void mpfs_i2c_transfer(struct mpfs_i2c_bus *bus, u32 data) |
| { |
| if (bus->msg_len > 0) |
| writel(data, bus->base + MPFS_I2C_DATA); |
| } |
| |
| static void mpfs_i2c_empty_rx(struct mpfs_i2c_bus *bus) |
| { |
| u8 ctrl; |
| u8 data_read; |
| |
| if (bus->msg_len > 0) { |
| data_read = readl(bus->base + MPFS_I2C_DATA); |
| *bus->buf++ = data_read; |
| bus->msg_len--; |
| } |
| |
| if (bus->msg_len <= 1) { |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| ctrl &= ~CTRL_AA; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| } |
| } |
| |
| static int mpfs_i2c_fill_tx(struct mpfs_i2c_bus *bus) |
| { |
| mpfs_i2c_transfer(bus, *bus->buf++); |
| bus->msg_len--; |
| |
| return 0; |
| } |
| |
| static int mpfs_i2c_service_handler(struct mpfs_i2c_bus *bus) |
| { |
| bool finish = false; |
| u32 status; |
| u8 ctrl; |
| |
| status = bus->isr_status; |
| |
| switch (status) { |
| case STATUS_M_START_SENT: |
| case STATUS_M_REPEATED_START_SENT: |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| ctrl &= ~CTRL_STA; |
| writel(bus->addr, bus->base + MPFS_I2C_DATA); |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| break; |
| case STATUS_M_SLAW_ACK: |
| case STATUS_M_TX_DATA_ACK: |
| if (bus->msg_len > 0) { |
| mpfs_i2c_fill_tx(bus); |
| } else { |
| /* On the last byte to be transmitted, send STOP */ |
| mpfs_i2c_stop(bus); |
| finish = true; |
| } |
| break; |
| case STATUS_M_SLAR_ACK: |
| if (bus->msg_len > 1u) { |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| ctrl |= CTRL_AA; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| } else if (bus->msg_len == 1u) { |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| ctrl &= ~CTRL_AA; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| } else { |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| ctrl |= CTRL_AA; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| /* On the last byte to be transmitted, send STOP */ |
| mpfs_i2c_stop(bus); |
| finish = true; |
| } |
| break; |
| case STATUS_M_RX_DATA_ACKED: |
| mpfs_i2c_empty_rx(bus); |
| break; |
| case STATUS_M_RX_DATA_NACKED: |
| mpfs_i2c_empty_rx(bus); |
| if (bus->msg_len == 0) { |
| /* On the last byte to be transmitted, send STOP */ |
| mpfs_i2c_stop(bus); |
| finish = true; |
| } |
| break; |
| case STATUS_M_TX_DATA_NACK: |
| case STATUS_M_SLAR_NACK: |
| case STATUS_M_SLAW_NACK: |
| bus->msg_err = -ENXIO; |
| mpfs_i2c_stop(bus); |
| finish = true; |
| break; |
| |
| case STATUS_M_ARB_LOST: |
| /* Handle Lost Arbitration */ |
| bus->msg_err = -EAGAIN; |
| finish = true; |
| break; |
| default: |
| break; |
| } |
| |
| if (finish) { |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| ctrl &= ~CTRL_AA; |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int mpfs_i2c_service(struct mpfs_i2c_bus *bus) |
| { |
| int ret = 0; |
| int si_bit; |
| |
| si_bit = readl(bus->base + MPFS_I2C_CTRL); |
| if (si_bit & CTRL_SI) { |
| bus->isr_status = readl(bus->base + MPFS_I2C_STATUS); |
| ret = mpfs_i2c_service_handler(bus); |
| } |
| /* Clear the si flag */ |
| mpfs_i2c_int_clear(bus); |
| si_bit = readl(bus->base + MPFS_I2C_CTRL); |
| |
| return ret; |
| } |
| |
| static int mpfs_i2c_check_service_change(struct mpfs_i2c_bus *bus) |
| { |
| u8 ctrl; |
| u32 count = 0; |
| |
| while (1) { |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| if (ctrl & CTRL_SI) |
| break; |
| udelay(1); |
| count += 1; |
| if (count == MICROCHIP_I2C_TIMEOUT) |
| return -ETIMEDOUT; |
| } |
| return 0; |
| } |
| |
| static int mpfs_i2c_poll_device(struct mpfs_i2c_bus *bus) |
| { |
| int ret; |
| |
| while (1) { |
| ret = mpfs_i2c_check_service_change(bus); |
| if (ret) |
| return ret; |
| |
| ret = mpfs_i2c_service(bus); |
| if (!ret) |
| /* all messages have been transferred */ |
| return ret; |
| } |
| } |
| |
| static int mpfs_i2c_xfer_msg(struct mpfs_i2c_bus *bus, struct i2c_msg *msg) |
| { |
| u8 ctrl; |
| int ret; |
| |
| if (!msg->len || !msg->buf) |
| return -EINVAL; |
| |
| bus->addr = i2c_8bit_addr_from_msg(msg); |
| bus->msg_len = msg->len; |
| bus->buf = msg->buf; |
| bus->msg_err = 0; |
| |
| mpfs_i2c_core_enable(bus); |
| |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| ctrl |= CTRL_STA; |
| |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| |
| ret = mpfs_i2c_poll_device(bus); |
| if (ret) |
| return ret; |
| |
| return bus->msg_err; |
| } |
| |
| static int mpfs_i2c_xfer(struct udevice *dev, struct i2c_msg *msgs, int num_msgs) |
| { |
| struct mpfs_i2c_bus *bus = dev_get_priv(dev); |
| int idx, ret; |
| |
| if (!msgs || !num_msgs) |
| return -EINVAL; |
| |
| for (idx = 0; idx < num_msgs; idx++) { |
| ret = mpfs_i2c_xfer_msg(bus, msgs++); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int mpfs_i2c_probe_chip(struct udevice *dev, uint addr, uint flags) |
| { |
| struct mpfs_i2c_bus *bus = dev_get_priv(dev); |
| int ret; |
| u8 ctrl, reg = 0; |
| |
| /* |
| * Send the chip address and verify that the |
| * address was <ACK>ed. |
| */ |
| bus->addr = addr << 1 | I2C_M_RD; |
| bus->buf = ® |
| bus->msg_len = 0; |
| bus->msg_err = 0; |
| |
| mpfs_i2c_core_enable(bus); |
| |
| ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| |
| ctrl |= CTRL_STA; |
| |
| writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| |
| ret = mpfs_i2c_poll_device(bus); |
| if (ret) |
| return ret; |
| |
| return bus->msg_err; |
| } |
| |
| static int mpfs_i2c_probe(struct udevice *dev) |
| { |
| int ret; |
| u32 val; |
| struct mpfs_i2c_bus *bus = dev_get_priv(dev); |
| |
| bus->base = dev_read_addr_ptr(dev); |
| if (!bus->base) |
| return -EINVAL; |
| |
| val = dev_read_u32(dev, "clock-frequency", &bus->clk_rate); |
| if (val) { |
| printf("Default to 100kHz\n"); |
| /* default clock rate */ |
| bus->clk_rate = 100000; |
| } |
| |
| if (bus->clk_rate > 400000 || bus->clk_rate <= 0) { |
| printf("Invalid clock-frequency %d\n", bus->clk_rate); |
| return -EINVAL; |
| } |
| |
| ret = mpfs_i2c_init(bus, dev); |
| |
| return ret; |
| } |
| |
| static const struct dm_i2c_ops mpfs_i2c_ops = { |
| .xfer = mpfs_i2c_xfer, |
| .probe_chip = mpfs_i2c_probe_chip, |
| }; |
| |
| static const struct udevice_id mpfs_i2c_ids[] = { |
| {.compatible = "microchip,mpfs-i2c"}, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(mpfs_i2c) = { |
| .name = "mpfs_i2c", |
| .id = UCLASS_I2C, |
| .of_match = mpfs_i2c_ids, |
| .ops = &mpfs_i2c_ops, |
| .probe = mpfs_i2c_probe, |
| .priv_auto = sizeof(struct mpfs_i2c_bus), |
| }; |