blob: 588497595934ff4839a867a73feb5fd9184b3855 [file] [log] [blame]
/*
* (C) Copyright 2001
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include "canbt.h"
#include <asm/processor.h>
#include <asm/io.h>
#include <command.h>
DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */
#if 0
#define FPGA_DEBUG
#endif
/* fpga configuration data */
const unsigned char fpgadata[] = {
#include "fpgadata.c"
};
/*
* include common fpga code (for esd boards)
*/
#include "../common/fpga.c"
int board_early_init_f (void)
{
unsigned long CPC0_CR0Reg;
int index, len, i;
int status;
/*
* Setup GPIO pins
*/
CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff;
CPC0_CR0Reg |= 0x0070f000;
mtdcr (CPC0_CR0, CPC0_CR0Reg);
#ifdef FPGA_DEBUG
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
serial_init ();
console_init_f ();
#endif
/*
* Boot onboard FPGA
*/
status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
if (status != 0) {
/* booting FPGA failed */
#ifndef FPGA_DEBUG
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
serial_init ();
console_init_f ();
#endif
printf ("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf ("(Timeout: DONE not high after programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i = 0; i < 4; i++) {
len = fpgadata[index];
printf ("FPGA: %s\n", &(fpgadata[index + 1]));
index += len + 3;
}
putc ('\n');
/* delayed reboot */
for (i = 20; i > 0; i--) {
printf ("Rebooting in %2d seconds \r", i);
for (index = 0; index < 1000; index++)
udelay (1000);
}
putc ('\n');
do_reset (NULL, 0, 0, NULL);
}
/*
* Setup port pins for normal operation
*/
out_be32 ((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */
out_be32 ((void *)GPIO0_TCR, 0x07038100); /* setup for output */
out_be32 ((void *)GPIO0_OR, 0x07030100); /* set output pins to high (default) */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
* IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
* IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
* IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
* IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr (UIC0ER, 0x00000000); /* disable all ints */
mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */
mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
int index;
int len;
char str[64];
int i = getenv_f("serial#", str, sizeof (str));
puts ("Board: ");
if (!i || strncmp (str, "CANBT", 5)) {
puts ("### No HW ID - assuming CANBT\n");
return (0);
}
puts (str);
puts ("\nFPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i = 0; i < 4; i++) {
len = fpgadata[index];
printf ("%s ", &(fpgadata[index + 1]));
index += len + 3;
}
putc ('\n');
return 0;
}