blob: 5cd6492dd503f95518850dcbaee44310af24da69 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2022 NXP
*/
#ifndef __IMX93_EVK_H
#define __IMX93_EVK_H
#include <linux/sizes.h>
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_MALLOC_F_ADDR 0x204D0000
#endif
#ifdef CONFIG_DISTRO_DEFAULTS
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
#include <config_distro_bootcmd.h>
#else
#define BOOTENV
#endif
/* Initial environment variables */
#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=0x83500000\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"image=Image\0" \
"splashimage=0x90000000\0" \
"console=ttyLP0,115200 earlycon\0" \
"fdt_addr_r=0x83000000\0" \
"fdt_addr=0x83000000\0" \
"cntr_addr=0x98000000\0" \
"cntr_file=os_cntr_signed.bin\0" \
"boot_fit=no\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"bootm_size=0x10000000\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
"loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}\0" \
"auth_os=auth_cntr ${cntr_addr}\0" \
"boot_os=booti ${loadaddr} - ${fdt_addr_r};\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${sec_boot} = yes; then " \
"if run auth_os; then " \
"run boot_os; " \
"else " \
"echo ERR: failed to authenticate; " \
"fi; " \
"else " \
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
"bootm ${loadaddr}; " \
"else " \
"if run loadfdt; then " \
"run boot_os; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi;" \
"fi;\0" \
"netargs=setenv bootargs ${jh_clk} console=${console} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
"if test ${ip_dyn} = yes; then " \
"setenv get_cmd dhcp; " \
"else " \
"setenv get_cmd tftp; " \
"fi; " \
"if test ${sec_boot} = yes; then " \
"${get_cmd} ${cntr_addr} ${cntr_file}; " \
"if run auth_os; then " \
"run boot_os; " \
"else " \
"echo ERR: failed to authenticate; " \
"fi; " \
"else " \
"${get_cmd} ${loadaddr} ${image}; " \
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
"bootm ${loadaddr}; " \
"else " \
"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
"run boot_os; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi;" \
"fi;\0" \
"bsp_bootcmd=echo Running BSP bootcmd ...; " \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if test ${sec_boot} = yes; then " \
"if run loadcntr; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
"else " \
"if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
"fi; " \
"fi; " \
"fi;"
/* Link Definitions */
#define CFG_SYS_INIT_RAM_ADDR 0x80000000
#define CFG_SYS_INIT_RAM_SIZE 0x200000
#define CFG_SYS_SDRAM_BASE 0x80000000
#define PHYS_SDRAM 0x80000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
#define CFG_SYS_FSL_USDHC_NUM 2
/* Using ULP WDOG for reset */
#define WDOG_BASE_ADDR WDG3_BASE_ADDR
#if defined(CONFIG_CMD_NET)
#define PHY_ANEG_TIMEOUT 20000
#endif
#endif