blob: 021892bb3dac917458e95904e3336312aca45d2a [file] [log] [blame]
# Copyright (c) 2016, Google Inc.
#
# SPDX-License-Identifier: GPL-2.0+
#
# U-Boot Verified Boot Test
"""
This tests verified boot in the following ways:
For image verification:
- Create FIT (unsigned) with mkimage
- Check that verification shows that no keys are verified
- Sign image
- Check that verification shows that a key is now verified
For configuration verification:
- Corrupt signature and check for failure
- Create FIT (with unsigned configuration) with mkimage
- Check that image verification works
- Sign the FIT and mark the key as 'required' for verification
- Check that image verification works
- Corrupt the signature
- Check that image verification no-longer works
Tests run with both SHA1 and SHA256 hashing.
"""
import pytest
import sys
import u_boot_utils as util
@pytest.mark.boardspec('sandbox')
@pytest.mark.buildconfigspec('fit_signature')
def test_vboot(u_boot_console):
"""Test verified boot signing with mkimage and verification with 'bootm'.
This works using sandbox only as it needs to update the device tree used
by U-Boot to hold public keys from the signing process.
The SHA1 and SHA256 tests are combined into a single test since the
key-generation process is quite slow and we want to avoid doing it twice.
"""
def dtc(dts):
"""Run the device tree compiler to compile a .dts file
The output file will be the same as the input file but with a .dtb
extension.
Args:
dts: Device tree file to compile.
"""
dtb = dts.replace('.dts', '.dtb')
util.run_and_log(cons, 'dtc %s %s%s -O dtb '
'-o %s%s' % (dtc_args, datadir, dts, tmpdir, dtb))
def run_bootm(sha_algo, test_type, expect_string):
"""Run a 'bootm' command U-Boot.
This always starts a fresh U-Boot instance since the device tree may
contain a new public key.
Args:
test_type: A string identifying the test type.
expect_string: A string which is expected in the output.
sha_algo: Either 'sha1' or 'sha256', to select the algorithm to
use.
"""
cons.restart_uboot()
with cons.log.section('Verified boot %s %s' % (sha_algo, test_type)):
output = cons.run_command_list(
['sb load hostfs - 100 %stest.fit' % tmpdir,
'fdt addr 100',
'bootm 100'])
assert(expect_string in ''.join(output))
def make_fit(its):
"""Make a new FIT from the .its source file.
This runs 'mkimage -f' to create a new FIT.
Args:
its: Filename containing .its source.
"""
util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f',
'%s%s' % (datadir, its), fit])
def sign_fit(sha_algo):
"""Sign the FIT
Signs the FIT and writes the signature into it. It also writes the
public key into the dtb.
Args:
sha_algo: Either 'sha1' or 'sha256', to select the algorithm to
use.
"""
cons.log.action('%s: Sign images' % sha_algo)
util.run_and_log(cons, [mkimage, '-F', '-k', tmpdir, '-K', dtb,
'-r', fit])
def test_with_algo(sha_algo):
"""Test verified boot with the given hash algorithm.
This is the main part of the test code. The same procedure is followed
for both hashing algorithms.
Args:
sha_algo: Either 'sha1' or 'sha256', to select the algorithm to
use.
"""
# Compile our device tree files for kernel and U-Boot. These are
# regenerated here since mkimage will modify them (by adding a
# public key) below.
dtc('sandbox-kernel.dts')
dtc('sandbox-u-boot.dts')
# Build the FIT, but don't sign anything yet
cons.log.action('%s: Test FIT with signed images' % sha_algo)
make_fit('sign-images-%s.its' % sha_algo)
run_bootm(sha_algo, 'unsigned images', 'dev-')
# Sign images with our dev keys
sign_fit(sha_algo)
run_bootm(sha_algo, 'signed images', 'dev+')
# Create a fresh .dtb without the public keys
dtc('sandbox-u-boot.dts')
cons.log.action('%s: Test FIT with signed configuration' % sha_algo)
make_fit('sign-configs-%s.its' % sha_algo)
run_bootm(sha_algo, 'unsigned config', '%s+ OK' % sha_algo)
# Sign images with our dev keys
sign_fit(sha_algo)
run_bootm(sha_algo, 'signed config', 'dev+')
cons.log.action('%s: Check signed config on the host' % sha_algo)
util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', tmpdir,
'-k', dtb])
# Increment the first byte of the signature, which should cause failure
sig = util.run_and_log(cons, 'fdtget -t bx %s %s value' %
(fit, sig_node))
byte_list = sig.split()
byte = int(byte_list[0], 16)
byte_list[0] = '%x' % (byte + 1)
sig = ' '.join(byte_list)
util.run_and_log(cons, 'fdtput -t bx %s %s value %s' %
(fit, sig_node, sig))
run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash')
cons.log.action('%s: Check bad config on the host' % sha_algo)
util.run_and_log_expect_exception(cons, [fit_check_sign, '-f', fit,
'-k', dtb], 1, 'Failed to verify required signature')
cons = u_boot_console
tmpdir = cons.config.result_dir + '/'
tmp = tmpdir + 'vboot.tmp'
datadir = cons.config.source_dir + '/test/py/tests/vboot/'
fit = '%stest.fit' % tmpdir
mkimage = cons.config.build_dir + '/tools/mkimage'
fit_check_sign = cons.config.build_dir + '/tools/fit_check_sign'
dtc_args = '-I dts -O dtb -i %s' % tmpdir
dtb = '%ssandbox-u-boot.dtb' % tmpdir
sig_node = '/configurations/conf@1/signature@1'
# Create an RSA key pair
public_exponent = 65537
util.run_and_log(cons, 'openssl genpkey -algorithm RSA -out %sdev.key '
'-pkeyopt rsa_keygen_bits:2048 '
'-pkeyopt rsa_keygen_pubexp:%d '
'2>/dev/null' % (tmpdir, public_exponent))
# Create a certificate containing the public key
util.run_and_log(cons, 'openssl req -batch -new -x509 -key %sdev.key -out '
'%sdev.crt' % (tmpdir, tmpdir))
# Create a number kernel image with zeroes
with open('%stest-kernel.bin' % tmpdir, 'w') as fd:
fd.write(5000 * chr(0))
try:
# We need to use our own device tree file. Remember to restore it
# afterwards.
old_dtb = cons.config.dtb
cons.config.dtb = dtb
test_with_algo('sha1')
test_with_algo('sha256')
finally:
# Go back to the original U-Boot with the correct dtb.
cons.config.dtb = old_dtb
cons.restart_uboot()