blob: 82dafb80b88a90e2171accf9988d1177588166d6 [file] [log] [blame]
/*
* Copyright (C) 2005 Embedded Alley Solutions, Inc.
* Dan Malek <dan@embeddedalley.com>
* Copied from STx GP3.
* Updates for Silicon Tx GP3 SSA. We only support 32-bit flash
* and DDR with SPD EEPROM configuration.
*
* Copyright 2004 Freescale Semiconductor.
* Copyright (C) 2002,2003, Motorola Inc.
* Xianghua Xiao <X.Xiao@motorola.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <config.h>
#include <mpc85xx.h>
/*
* TLB0 and TLB1 Entries
*
* Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
* However, CCSRBAR is then relocated to CFG_CCSRBAR right after
* these TLB entries are established.
*
* The TLB entries for DDR are dynamically setup in spd_sdram()
* and use TLB1 Entries 8 through 15 as needed according to the
* size of DDR memory.
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
* MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
#define entry_start \
mflr r1 ; \
bl 0f ;
#define entry_end \
0: mflr r0 ; \
mtlr r1 ; \
blr ;
.section .bootpg, "ax"
.globl tlb1_entry
tlb1_entry:
entry_start
/*
* Number of TLB0 and TLB1 entries in the following table
*/
.long 12
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
/*
* TLB0 4K Non-cacheable, guarded
* 0xff700000 4K Initial CCSRBAR mapping
*
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
/*
* TLB0 16K Cacheable, non-guarded
* 0xd001_0000 16K Temporary Global data for initialization
*
* Use four 4K TLB0 entries. These entries must be cacheable
* as they provide the bootstrap memory before the memory
* controler and real memory have been configured.
*
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 0: 64M Non-cacheable, guarded
* 0xfc000000 6M4 FLASH
* Out of reset this entry is only 4K.
*/
.long FSL_BOOKE_MAS0(1, 0, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
.long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
.long FSL_BOOKE_MAS0(1, 1, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
.long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
.long FSL_BOOKE_MAS0(1, 2, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
.long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xa0000000 256M PCI2 MEM First half
*/
.long FSL_BOOKE_MAS0(1, 3, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
.long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xb0000000 256M PCI2 MEM Second half
*/
.long FSL_BOOKE_MAS0(1, 4, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
.long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 16M PCI1 IO
* 0xe300_0000 16M PCI2 IO
*/
.long FSL_BOOKE_MAS0(1, 5, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
.long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 256M Non-cacheable, guarded
* 0xf0000000 Local bus expansion option.
* 0xfb000000 Configuration Latch register (one word)
* 0xfc000000 Up to 64M flash
*/
.long FSL_BOOKE_MAS0(1, 7, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
.long FSL_BOOKE_MAS2(CFG_LBC_OPTION_BASE, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_LBC_OPTION_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
entry_end
/*
* LAW(Local Access Window) configuration:
*
* 0x0000_0000 0x7fff_ffff DDR 2G
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
* 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
* 0xf000_0000 0xfaff_ffff Local bus 128M
* 0xfb00_0000 0xfb00_ffff Config Latch 64K
* 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
*
* Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*/
#if !defined(CONFIG_SPD_EEPROM)
#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
#else
#define LAWBAR0 0
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
#endif
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
/* Map the whole localbus, including flash and reset latch.
*/
#define LAWBAR5 ((CFG_LBC_OPTION_BASE>>12) & 0xfffff)
#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
.section .bootpg, "ax"
.globl law_entry
law_entry:
entry_start
.long 6
.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
entry_end