blob: 53363e38fe4309fa751716ce1d25a12d6d0e3d58 [file] [log] [blame]
menu "MIPS architecture"
depends on MIPS
config SYS_ARCH
default "mips"
config SYS_CPU
default "mips32" if CPU_MIPS32
default "mips64" if CPU_MIPS64
choice
prompt "Target select"
optional
config TARGET_QEMU_MIPS
bool "Support qemu-mips"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
config TARGET_MALTA
bool "Support malta"
select DM
select DM_SERIAL
select DYNAMIC_IO_PORT_BASE
select OF_CONTROL
select OF_ISA_BUS
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS32_R6
select SWAP_IO_SPACE
select MIPS_L1_CACHE_SHIFT_6
config TARGET_VCT
bool "Support vct"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
config TARGET_DBAU1X00
bool "Support dbau1x00"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
select MIPS_TUNE_4KC
config TARGET_PB1X00
bool "Support pb1x00"
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
select MIPS_TUNE_4KC
config ARCH_ATH79
bool "Support QCA/Atheros ath79"
select OF_CONTROL
select DM
config MACH_PIC32
bool "Support Microchip PIC32"
select OF_CONTROL
select DM
endchoice
source "board/dbau1x00/Kconfig"
source "board/imgtec/malta/Kconfig"
source "board/micronas/vct/Kconfig"
source "board/pb1x00/Kconfig"
source "board/qemu-mips/Kconfig"
source "arch/mips/mach-ath79/Kconfig"
source "arch/mips/mach-pic32/Kconfig"
if MIPS
choice
prompt "Endianness selection"
help
Some MIPS boards can be configured for either little or big endian
byte order. These modes require different U-Boot images. In general there
is one preferred byteorder for a particular system but some systems are
just as commonly used in the one or the other endianness.
config SYS_BIG_ENDIAN
bool "Big endian"
depends on SUPPORTS_BIG_ENDIAN
config SYS_LITTLE_ENDIAN
bool "Little endian"
depends on SUPPORTS_LITTLE_ENDIAN
endchoice
choice
prompt "CPU selection"
default CPU_MIPS32_R2
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SUPPORTS_CPU_MIPS32_R1
select 32BIT
help
Choose this option to build an U-Boot for release 1 through 5 of the
MIPS32 architecture.
config CPU_MIPS32_R2
bool "MIPS32 Release 2"
depends on SUPPORTS_CPU_MIPS32_R2
select 32BIT
help
Choose this option to build an U-Boot for release 2 through 5 of the
MIPS32 architecture.
config CPU_MIPS32_R6
bool "MIPS32 Release 6"
depends on SUPPORTS_CPU_MIPS32_R6
select 32BIT
help
Choose this option to build an U-Boot for release 6 or later of the
MIPS32 architecture.
config CPU_MIPS64_R1
bool "MIPS64 Release 1"
depends on SUPPORTS_CPU_MIPS64_R1
select 64BIT
help
Choose this option to build a kernel for release 1 through 5 of the
MIPS64 architecture.
config CPU_MIPS64_R2
bool "MIPS64 Release 2"
depends on SUPPORTS_CPU_MIPS64_R2
select 64BIT
help
Choose this option to build a kernel for release 2 through 5 of the
MIPS64 architecture.
config CPU_MIPS64_R6
bool "MIPS64 Release 6"
depends on SUPPORTS_CPU_MIPS64_R6
select 64BIT
help
Choose this option to build a kernel for release 6 or later of the
MIPS64 architecture.
endchoice
menu "OS boot interface"
config MIPS_BOOT_CMDLINE_LEGACY
bool "Hand over legacy command line to Linux kernel"
default y
help
Enable this option if you want U-Boot to hand over the Yamon-style
command line to the kernel. All bootargs will be prepared as argc/argv
compatible list. The argument count (argc) is stored in register $a0.
The address of the argument list (argv) is stored in register $a1.
config MIPS_BOOT_ENV_LEGACY
bool "Hand over legacy environment to Linux kernel"
default y
help
Enable this option if you want U-Boot to hand over the Yamon-style
environment to the kernel. Information like memory size, initrd
address and size will be prepared as zero-terminated key/value list.
The address of the environment is stored in register $a2.
config MIPS_BOOT_FDT
bool "Hand over a flattened device tree to Linux kernel"
default n
help
Enable this option if you want U-Boot to hand over a flattened
device tree to the kernel. According to UHI register $a0 will be set
to -2 and the FDT address is stored in $a1.
endmenu
config SUPPORTS_BIG_ENDIAN
bool
config SUPPORTS_LITTLE_ENDIAN
bool
config SUPPORTS_CPU_MIPS32_R1
bool
config SUPPORTS_CPU_MIPS32_R2
bool
config SUPPORTS_CPU_MIPS32_R6
bool
config SUPPORTS_CPU_MIPS64_R1
bool
config SUPPORTS_CPU_MIPS64_R2
bool
config SUPPORTS_CPU_MIPS64_R6
bool
config CPU_MIPS32
bool
default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
config CPU_MIPS64
bool
default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
config MIPS_TUNE_4KC
bool
config MIPS_TUNE_14KC
bool
config MIPS_TUNE_24KC
bool
config MIPS_TUNE_74KC
bool
config 32BIT
bool
config 64BIT
bool
config SWAP_IO_SPACE
bool
config SYS_MIPS_CACHE_INIT_RAM_LOAD
bool
config MIPS_L1_CACHE_SHIFT_4
bool
config MIPS_L1_CACHE_SHIFT_5
bool
config MIPS_L1_CACHE_SHIFT_6
bool
config MIPS_L1_CACHE_SHIFT_7
bool
config MIPS_L1_CACHE_SHIFT
int
default "7" if MIPS_L1_CACHE_SHIFT_7
default "6" if MIPS_L1_CACHE_SHIFT_6
default "5" if MIPS_L1_CACHE_SHIFT_5
default "4" if MIPS_L1_CACHE_SHIFT_4
default "5"
config DYNAMIC_IO_PORT_BASE
bool
endif
endmenu